[people/ms/u-boot.git] / include / configs / mx23_olinuxino.h

/*
 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#ifndef __MX23_OLINUXINO_CONFIG_H__
#define __MX23_OLINUXINO_CONFIG_H__

#include <asm/arch/iomux-mx23.h>

/*
 * SoC configurations
 */
#define CONFIG_MX23				/* i.MX23 SoC */
#define CONFIG_MXS_GPIO				/* GPIO control */
#define CONFIG_SYS_HZ		1000		/* Ticks per second */

#define CONFIG_MACH_TYPE	4105

#include <asm/arch/regs-base.h>

#define CONFIG_SYS_NO_FLASH
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_MISC_INIT

/*
 * SPL
 */
#define CONFIG_SPL
#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT

/*
 * U-Boot Commands
 */
#include <config_cmd_default.h>
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_LED
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NET
#define CONFIG_CMD_USB

/*
 * Memory configurations
 */
#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
#define PHYS_SDRAM_1			0x40000000	/* Base address */
#define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
/* Point initial SP in SRAM so SPL can use it too. */

#define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/*
 * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
 * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
 * binary. In case there was more of this mess, 0x100 bytes are skipped.
 */
#define CONFIG_SYS_TEXT_BASE		0x40000100

/*
 * U-Boot general configurations
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT	"=> "
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
#define CONFIG_SYS_PBSIZE	\
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
						/* Print buffer size */
#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
						/* Boot argument buffer size */
#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
#define CONFIG_CMDLINE_EDITING			/* Command history etc */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Serial Driver
 */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK		24000000
#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX		0
#define CONFIG_BAUDRATE			115200	/* Default baud rate */

/*
 * Status LED
 */
#define CONFIG_STATUS_LED
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_BOOT	0
#define STATUS_LED_BIT	MX23_PAD_SSP1_DETECT__GPIO_2_1
#define STATUS_LED_STATE	STATUS_LED_ON
#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)

/*
 * MMC Driver
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_GENERIC_MMC
#define CONFIG_MXS_MMC
#endif

/*
 * APBH DMA
 */
#define CONFIG_APBH_DMA

/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MXS
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#endif

/* Ethernet */
#ifdef CONFIG_CMD_NET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#endif

/*
 * Boot Linux
 */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTDELAY	3
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_LOADADDR		0x42000000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
#define CONFIG_OF_LIBFDT

/*
 * Environment
 */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OVERWRITE
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET	(256 * 1024)
#define CONFIG_ENV_SIZE	(16 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif

/*
 * Extra Environments
 */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"update_sd_firmware_filename=u-boot.sd\0" \
	"update_sd_firmware="		/* Update the SD firmware partition */ \
		"if mmc rescan ; then "	\
		"if tftp ${update_sd_firmware_filename} ; then " \
		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
		"setexpr fw_sz ${fw_sz} + 1 ; "	\
		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
		"fi ; "	\
		"fi\0" \
	"script=boot.scr\0"	\
	"uimage=uImage\0" \
	"console=ttyAMA0\0" \
	"fdt_file=imx23-olinuxino.dtb\0" \
	"fdt_addr=0x41000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=0\0" \
	"mmcpart=2\0" \
	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript="  \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; "	\
		"source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"usb start; " \
		"run netargs; "	\
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi;" \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#endif /* __MX23_OLINUXINO_CONFIG_H__ */
Commit	Line	Data
64a93860 MV	1	/*
	2	* Copyright (C) 2013 Marek Vasut <marex@denx.de>
	3	*
	4	* This program is free software; you can redistribute it and/or
	5	* modify it under the terms of the GNU General Public License as
	6	* published by the Free Software Foundation; either version 2 of
	7	* the License, or (at your option) any later version.
	8	*
	9	* This program is distributed in the hope that it will be useful,
	10	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	12	* GNU General Public License for more details.
	13	*
	14	* You should have received a copy of the GNU General Public License
	15	* along with this program; if not, write to the Free Software
	16	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	17	* MA 02111-1307 USA
	18	*/
	19	#ifndef __MX23_OLINUXINO_CONFIG_H__
	20	#define __MX23_OLINUXINO_CONFIG_H__
	21
36c7c925 OS	22	#include <asm/arch/iomux-mx23.h>
36c7c925 OS	23
64a93860 MV	24	/*
	25	* SoC configurations
	26	*/
2feae93a OS	27	#define CONFIG_MX23 /* i.MX23 SoC */
	28	#define CONFIG_MXS_GPIO /* GPIO control */
	29	#define CONFIG_SYS_HZ 1000 /* Ticks per second */
64a93860	30
2feae93a	31	#define CONFIG_MACH_TYPE 4105
64a93860 MV	32
	33	#include <asm/arch/regs-base.h>
	34
2feae93a OS	35	#define CONFIG_SYS_NO_FLASH
	36	#define CONFIG_BOARD_EARLY_INIT_F
	37	#define CONFIG_ARCH_MISC_INIT
64a93860 MV	38
	39	/*
	40	* SPL
	41	*/
2feae93a OS	42	#define CONFIG_SPL
	43	#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
	44	#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
	45	#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
	46	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	47	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	48	#define CONFIG_SPL_GPIO_SUPPORT
64a93860 MV	49
	50	/*
	51	* U-Boot Commands
	52	*/
	53	#include <config_cmd_default.h>
2feae93a OS	54	#define CONFIG_DISPLAY_CPUINFO
	55	#define CONFIG_DOS_PARTITION
	56
	57	#define CONFIG_CMD_CACHE
	58	#define CONFIG_CMD_DHCP
	59	#define CONFIG_CMD_EXT2
	60	#define CONFIG_CMD_FAT
	61	#define CONFIG_CMD_GPIO
	62	#define CONFIG_CMD_LED
	63	#define CONFIG_CMD_MMC
	64	#define CONFIG_CMD_NET
	65	#define CONFIG_CMD_USB
64a93860 MV	66
	67	/*
	68	* Memory configurations
	69	*/
2feae93a OS	70	#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
	71	#define PHYS_SDRAM_1 0x40000000 /* Base address */
	72	#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
	73	#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
	74	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
	75	#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
	76	#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
	77	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
64a93860 MV	78	/* Point initial SP in SRAM so SPL can use it too. */
	79
	80	#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
	81	#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
	82
	83	#define CONFIG_SYS_INIT_SP_OFFSET \
	84	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	85	#define CONFIG_SYS_INIT_SP_ADDR \
	86	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	87	/*
	88	* We need to sacrifice first 4 bytes of RAM here to avoid triggering some
	89	* strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
	90	* binary. In case there was more of this mess, 0x100 bytes are skipped.
	91	*/
2feae93a	92	#define CONFIG_SYS_TEXT_BASE 0x40000100
64a93860 MV	93
	94	/*
	95	* U-Boot general configurations
	96	*/
2feae93a OS	97	#define CONFIG_SYS_LONGHELP
	98	#define CONFIG_SYS_PROMPT "=> "
	99	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	100	#define CONFIG_SYS_PBSIZE \
64a93860 MV	101	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
64a93860 MV	102	/* Print buffer size */
2feae93a OS	103	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
2feae93a OS	104	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
64a93860	105	/* Boot argument buffer size */
2feae93a OS	106	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	107	#define CONFIG_AUTO_COMPLETE /* Command auto complete */
	108	#define CONFIG_CMDLINE_EDITING /* Command history etc */
	109	#define CONFIG_SYS_HUSH_PARSER
64a93860 MV	110
	111	/*
	112	* Serial Driver
	113	*/
2feae93a OS	114	#define CONFIG_PL011_SERIAL
	115	#define CONFIG_PL011_CLOCK 24000000
	116	#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
	117	#define CONFIG_CONS_INDEX 0
	118	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
64a93860	119
36c7c925 OS	120	/*
	121	* Status LED
	122	*/
2feae93a OS	123	#define CONFIG_STATUS_LED
	124	#define CONFIG_GPIO_LED
	125	#define CONFIG_BOARD_SPECIFIC_LED
	126	#define STATUS_LED_BOOT 0
	127	#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1
	128	#define STATUS_LED_STATE STATUS_LED_ON
	129	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
36c7c925	130
13b1ebde MV	131	/*
	132	* MMC Driver
	133	*/
2feae93a	134	#ifdef CONFIG_CMD_MMC
13b1ebde MV	135	#define CONFIG_MMC
	136	#define CONFIG_BOUNCE_BUFFER
	137	#define CONFIG_GENERIC_MMC
	138	#define CONFIG_MXS_MMC
	139	#endif
	140
64a93860 MV	141	/*
	142	* APBH DMA
	143	*/
	144	#define CONFIG_APBH_DMA
	145
ebe1d170	146	/* USB */
2feae93a OS	147	#ifdef CONFIG_CMD_USB
	148	#define CONFIG_USB_EHCI
	149	#define CONFIG_USB_EHCI_MXS
	150	#define CONFIG_EHCI_MXS_PORT0
	151	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
	152	#define CONFIG_EHCI_IS_TDI
	153	#define CONFIG_USB_STORAGE
ebe1d170 OS	154	#endif
ebe1d170 OS	155
b8bd75af	156	/* Ethernet */
2feae93a OS	157	#ifdef CONFIG_CMD_NET
	158	#define CONFIG_USB_HOST_ETHER
	159	#define CONFIG_USB_ETHER_SMSC95XX
b8bd75af OS	160	#endif
b8bd75af OS	161
64a93860 MV	162	/*
	163	* Boot Linux
	164	*/
2feae93a OS	165	#define CONFIG_CMDLINE_TAG
	166	#define CONFIG_SETUP_MEMORY_TAGS
	167	#define CONFIG_BOOTDELAY 3
	168	#define CONFIG_BOOTFILE "uImage"
	169	#define CONFIG_LOADADDR 0x42000000
	170	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	171	#define CONFIG_OF_LIBFDT
64a93860	172
38fc15d8 OS	173	/*
	174	* Environment
	175	*/
2feae93a OS	176	#define CONFIG_ENV_IS_IN_MMC
	177	#define CONFIG_ENV_OVERWRITE
	178	#ifdef CONFIG_ENV_IS_IN_MMC
	179	#define CONFIG_ENV_OFFSET (256 * 1024)
	180	#define CONFIG_ENV_SIZE (16 * 1024)
	181	#define CONFIG_SYS_MMC_ENV_DEV 0
38fc15d8 OS	182	#endif
	183
	184	/*
	185	* Extra Environments
	186	*/
	187	#define CONFIG_EXTRA_ENV_SETTINGS \
	188	"update_sd_firmware_filename=u-boot.sd\0" \
	189	"update_sd_firmware=" /* Update the SD firmware partition */ \
	190	"if mmc rescan ; then " \
	191	"if tftp ${update_sd_firmware_filename} ; then " \
	192	"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
	193	"setexpr fw_sz ${fw_sz} + 1 ; " \
	194	"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
	195	"fi ; " \
	196	"fi\0" \
	197	"script=boot.scr\0" \
	198	"uimage=uImage\0" \
	199	"console=ttyAMA0\0" \
	200	"fdt_file=imx23-olinuxino.dtb\0" \
	201	"fdt_addr=0x41000000\0" \
	202	"boot_fdt=try\0" \
b8bd75af	203	"ip_dyn=yes\0" \
38fc15d8 OS	204	"mmcdev=0\0" \
	205	"mmcpart=2\0" \
	206	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
	207	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	208	"root=${mmcroot}\0" \
	209	"loadbootscript=" \
	210	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	211	"bootscript=echo Running bootscript from mmc ...; " \
	212	"source\0" \
	213	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	214	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	215	"mmcboot=echo Booting from mmc ...; " \
	216	"run mmcargs; " \
	217	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	218	"if run loadfdt; then " \
	219	"bootm ${loadaddr} - ${fdt_addr}; " \
	220	"else " \
	221	"if test ${boot_fdt} = try; then " \
	222	"bootm; " \
	223	"else " \
	224	"echo WARN: Cannot load the DT; " \
	225	"fi; " \
	226	"fi; " \
	227	"else " \
	228	"bootm; " \
b8bd75af	229	"fi;\0" \
50cea244	230	"netargs=setenv bootargs console=${console},${baudrate} " \
b8bd75af OS	231	"root=/dev/nfs " \
	232	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	233	"netboot=echo Booting from net ...; " \
	234	"usb start; " \
	235	"run netargs; " \
	236	"if test ${ip_dyn} = yes; then " \
	237	"setenv get_cmd dhcp; " \
	238	"else " \
	239	"setenv get_cmd tftp; " \
	240	"fi; " \
	241	"${get_cmd} ${uimage}; " \
	242	"if test ${boot_fdt} = yes; then " \
	243	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	244	"bootm ${loadaddr} - ${fdt_addr}; " \
	245	"else " \
	246	"if test ${boot_fdt} = try; then " \
	247	"bootm; " \
	248	"else " \
	249	"echo WARN: Cannot load the DT; " \
	250	"fi;" \
	251	"fi; " \
	252	"else " \
	253	"bootm; " \
38fc15d8 OS	254	"fi;\0"
	255
	256	#define CONFIG_BOOTCOMMAND \
	257	"mmc dev ${mmcdev}; if mmc rescan; then " \
	258	"if run loadbootscript; then " \
	259	"run bootscript; " \
	260	"else " \
	261	"if run loaduimage; then " \
	262	"run mmcboot; " \
b8bd75af	263	"else run netboot; " \
38fc15d8 OS	264	"fi; " \
38fc15d8 OS	265	"fi; " \
b8bd75af	266	"else run netboot; fi"
38fc15d8	267
64a93860	268	#endif /* __MX23_OLINUXINO_CONFIG_H__ */