[people/ms/u-boot.git] / include / configs / mx53ard.h

/*
 * Copyright (C) 2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the MX53ARD Freescale board.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MX53

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MACH_TYPE	MACH_TYPE_MX53_ARD

#include <asm/arch/imx-regs.h>

#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO

#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR_AXI
#define CONFIG_NAND_MXC
#define CONFIG_MXC_NAND_REGS_BASE	NFC_BASE_ADDR_AXI
#define CONFIG_MXC_NAND_IP_REGS_BASE	NFC_BASE_ADDR
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_CMD_NAND

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART1_BASE

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_BASE		I2C2_BASE_ADDR
#define CONFIG_SYS_I2C_SPEED            100000

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	2

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

/* Eth Configs */
#define CONFIG_HAS_ETH1
#define CONFIG_MII

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Command definition */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_SETEXPR

#define CONFIG_BOOTDELAY	3

#define CONFIG_ETHPRIME		"smc911x"

/*Support LAN9217*/
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE CS1_BASE_ADDR

#define CONFIG_LOADADDR		0x72000000	/* loadaddr env var */
#define CONFIG_SYS_TEXT_BASE    0x77800000

#define CONFIG_DEFAULT_FDT_FILE		"imx53-ard.dtb"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x71000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=2\0" \
	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loaduimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

#define CONFIG_ARP_TIMEOUT	200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT		"MX53ARD U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START       0x70000000
#define CONFIG_SYS_MEMTEST_END         0x70010000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_SYS_HZ		1000
#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	2
#define PHYS_SDRAM_1		CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
#define PHYS_SDRAM_2		CSD1_BASE_ADDR
#define PHYS_SDRAM_2_SIZE	(512 * 1024 * 1024)
#define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)

#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
#define CONFIG_ENV_SIZE        (8 * 1024)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV	0

#define CONFIG_OF_LIBFDT

#define MX53ARD_CS1GCR1		(CSEN | DSZ(2))
#define MX53ARD_CS1RCR1		(RCSN(2) | OEN (1) | RWSC(22))
#define MX53ARD_CS1RCR2		RBEN(2)
#define MX53ARD_CS1WCR1		(WCSN(2) | WEN(2) | WBEN(2) | WWSC(22))

#endif				/* __CONFIG_H */
Commit	Line	Data
47c3e074 FE	1	/*
	2	* Copyright (C) 2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the MX53ARD Freescale board.
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License as
	8	* published by the Free Software Foundation; either version 2 of
	9	* the License, or (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	19	* MA 02111-1307 USA
	20	*/
	21
	22	#ifndef __CONFIG_H
	23	#define __CONFIG_H
	24
	25	#define CONFIG_MX53
	26
47c3e074 FE	27	#define CONFIG_DISPLAY_CPUINFO
	28	#define CONFIG_DISPLAY_BOARDINFO
	29
7c2eabab FE	30	#define CONFIG_MACH_TYPE MACH_TYPE_MX53_ARD
7c2eabab FE	31
47c3e074 FE	32	#include <asm/arch/imx-regs.h>
	33
	34	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
47c3e074 FE	35	#define CONFIG_SETUP_MEMORY_TAGS
47c3e074 FE	36	#define CONFIG_INITRD_TAG
fd622f23	37	#define CONFIG_REVISION_TAG
47c3e074 FE	38
	39	/* Size of malloc() pool */
	40	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	41
	42	#define CONFIG_BOARD_EARLY_INIT_F
	43	#define CONFIG_MXC_GPIO
	44
68fbc0e6 BT	45	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	46	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
	47	#define CONFIG_NAND_MXC
	48	#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
	49	#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
	50	#define CONFIG_SYS_NAND_LARGEPAGE
	51	#define CONFIG_MXC_NAND_HWECC
	52	#define CONFIG_SYS_NAND_USE_FLASH_BBT
	53	#define CONFIG_CMD_NAND
	54
47c3e074	55	#define CONFIG_MXC_UART
40f6fffe	56	#define CONFIG_MXC_UART_BASE UART1_BASE
47c3e074 FE	57
	58	/* I2C Configs */
	59	#define CONFIG_CMD_I2C
	60	#define CONFIG_HARD_I2C
	61	#define CONFIG_I2C_MXC
de6f604d	62	#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
47c3e074	63	#define CONFIG_SYS_I2C_SPEED 100000
47c3e074 FE	64
	65	/* MMC Configs */
	66	#define CONFIG_FSL_ESDHC
	67	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	68	#define CONFIG_SYS_FSL_ESDHC_NUM 2
	69
	70	#define CONFIG_MMC
	71	#define CONFIG_CMD_MMC
	72	#define CONFIG_GENERIC_MMC
	73	#define CONFIG_CMD_FAT
	74	#define CONFIG_DOS_PARTITION
	75
	76	/* Eth Configs */
	77	#define CONFIG_HAS_ETH1
47c3e074	78	#define CONFIG_MII
47c3e074 FE	79
	80	#define CONFIG_CMD_PING
	81	#define CONFIG_CMD_DHCP
	82	#define CONFIG_CMD_MII
	83	#define CONFIG_CMD_NET
	84
	85	/* allow to overwrite serial and ethaddr */
	86	#define CONFIG_ENV_OVERWRITE
	87	#define CONFIG_CONS_INDEX 1
	88	#define CONFIG_BAUDRATE 115200
47c3e074 FE	89
	90	/* Command definition */
	91	#include <config_cmd_default.h>
	92
	93	#undef CONFIG_CMD_IMLS
547e31d2	94	#define CONFIG_CMD_SETEXPR
47c3e074 FE	95
	96	#define CONFIG_BOOTDELAY 3
	97
28b119e9	98	#define CONFIG_ETHPRIME "smc911x"
47c3e074 FE	99
	100	/Support LAN9217/
	101	#define CONFIG_SMC911X
	102	#define CONFIG_SMC911X_16_BIT
	103	#define CONFIG_SMC911X_BASE CS1_BASE_ADDR
	104
547e31d2	105	#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
47c3e074 FE	106	#define CONFIG_SYS_TEXT_BASE 0x77800000
47c3e074 FE	107
547e31d2 OS	108	#define CONFIG_DEFAULT_FDT_FILE "imx53-ard.dtb"
547e31d2 OS	109
47c3e074 FE	110	#define CONFIG_EXTRA_ENV_SETTINGS \
	111	"script=boot.scr\0" \
	112	"uimage=uImage\0" \
547e31d2 OS	113	"console=ttymxc0\0" \
	114	"fdt_high=0xffffffff\0" \
	115	"initrd_high=0xffffffff\0" \
	116	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	117	"fdt_addr=0x71000000\0" \
	118	"boot_fdt=try\0" \
	119	"ip_dyn=yes\0" \
	120	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
7fb72c79	121	"mmcpart=2\0" \
547e31d2 OS	122	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
	123	"update_sd_firmware_filename=u-boot.imx\0" \
	124	"update_sd_firmware=" \
	125	"if test ${ip_dyn} = yes; then " \
	126	"setenv get_cmd dhcp; " \
	127	"else " \
	128	"setenv get_cmd tftp; " \
	129	"fi; " \
	130	"if mmc dev ${mmcdev}; then " \
	131	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	132	"setexpr fw_sz ${filesize} / 0x200; " \
	133	"setexpr fw_sz ${fw_sz} + 1; " \
	134	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	135	"fi; " \
	136	"fi\0" \
	137	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	138	"root=${mmcroot}\0" \
47c3e074 FE	139	"loadbootscript=" \
	140	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	141	"bootscript=echo Running bootscript from mmc ...; " \
	142	"source\0" \
	143	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
547e31d2	144	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
47c3e074 FE	145	"mmcboot=echo Booting from mmc ...; " \
47c3e074 FE	146	"run mmcargs; " \
547e31d2 OS	147	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	148	"if run loadfdt; then " \
	149	"bootm ${loadaddr} - ${fdt_addr}; " \
	150	"else " \
	151	"if test ${boot_fdt} = try; then " \
	152	"bootm; " \
	153	"else " \
	154	"echo WARN: Cannot load the DT; " \
	155	"fi; " \
	156	"fi; " \
	157	"else " \
	158	"bootm; " \
	159	"fi;\0" \
	160	"netargs=setenv bootargs console=${console},${baudrate} " \
47c3e074	161	"root=/dev/nfs " \
547e31d2 OS	162	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
547e31d2 OS	163	"netboot=echo Booting from net ...; " \
47c3e074	164	"run netargs; " \
547e31d2 OS	165	"if test ${ip_dyn} = yes; then " \
547e31d2 OS	166	"setenv get_cmd dhcp; " \
47c3e074	167	"else " \
547e31d2	168	"setenv get_cmd tftp; " \
47c3e074	169	"fi; " \
547e31d2 OS	170	"${get_cmd} ${uimage}; " \
	171	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	172	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	173	"bootm ${loadaddr} - ${fdt_addr}; " \
	174	"else " \
	175	"if test ${boot_fdt} = try; then " \
	176	"bootm; " \
	177	"else " \
	178	"echo WARN: Cannot load the DT; " \
	179	"fi; " \
	180	"fi; " \
	181	"else " \
	182	"bootm; " \
	183	"fi;\0"
	184
	185	#define CONFIG_BOOTCOMMAND \
	186	"mmc dev ${mmcdev}; if mmc rescan; then " \
	187	"if run loadbootscript; then " \
	188	"run bootscript; " \
	189	"else " \
	190	"if run loaduimage; then " \
	191	"run mmcboot; " \
	192	"else run netboot; " \
	193	"fi; " \
	194	"fi; " \
	195	"else run netboot; fi"
	196
47c3e074 FE	197	#define CONFIG_ARP_TIMEOUT 200UL
	198
	199	/* Miscellaneous configurable options */
	200	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	201	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
47c3e074 FE	202	#define CONFIG_SYS_PROMPT "MX53ARD U-Boot > "
	203	#define CONFIG_AUTO_COMPLETE
	204	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	205
	206	/* Print Buffer Size */
	207	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	208	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	209	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	210
	211	#define CONFIG_SYS_MEMTEST_START 0x70000000
	212	#define CONFIG_SYS_MEMTEST_END 0x70010000
	213
	214	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	215
	216	#define CONFIG_SYS_HZ 1000
	217	#define CONFIG_CMDLINE_EDITING
	218
47c3e074 FE	219	/* Physical Memory Map */
	220	#define CONFIG_NR_DRAM_BANKS 2
	221	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
	222	#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
	223	#define PHYS_SDRAM_2 CSD1_BASE_ADDR
	224	#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024)
	225	#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
	226
	227	#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
	228	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
	229	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
	230
	231	#define CONFIG_SYS_INIT_SP_OFFSET \
	232	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	233	#define CONFIG_SYS_INIT_SP_ADDR \
	234	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	235
	236	/* FLASH and environment organization */
	237	#define CONFIG_SYS_NO_FLASH
	238
	239	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	240	#define CONFIG_ENV_SIZE (8 * 1024)
	241	#define CONFIG_ENV_IS_IN_MMC
	242	#define CONFIG_SYS_MMC_ENV_DEV 0
	243
	244	#define CONFIG_OF_LIBFDT
	245
	246	#define MX53ARD_CS1GCR1 (CSEN \| DSZ(2))
	247	#define MX53ARD_CS1RCR1 (RCSN(2) \| OEN (1) \| RWSC(22))
	248	#define MX53ARD_CS1RCR2 RBEN(2)
	249	#define MX53ARD_CS1WCR1 (WCSN(2) \| WEN(2) \| WBEN(2) \| WWSC(22))
	250
	251	#endif /* __CONFIG_H */