projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 7dd6545d FE |
1 | /* |
| 2 | * Copyright (C) 2012 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 903e779c | 4 | * Configuration settings for the Freescale i.MX6Q SabreAuto board. |
| 7dd6545d | 5 | * |
| 1a459660 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7dd6545d FE |
7 | */ |
| 8 | ||
| 9 | #ifndef __MX6QSABREAUTO_CONFIG_H | |
| 10 | #define __MX6QSABREAUTO_CONFIG_H | |
| 7dd6545d FE |
11 | |
| 12 | #define CONFIG_MACH_TYPE 3529 | |
| 13 | #define CONFIG_MXC_UART_BASE UART4_BASE | |
| 12ca05a3 | 14 | #define CONSOLE_DEV "ttymxc3" |
| 903e779c | 15 | #define CONFIG_MMCROOT "/dev/mmcblk0p2" |
| 7dd6545d | 16 | |
| 73448b1f | 17 | /* USB Configs */ |
| 73448b1f KW |
18 | #define CONFIG_USB_EHCI |
| 19 | #define CONFIG_USB_EHCI_MX6 | |
| 73448b1f KW |
20 | #define CONFIG_USB_HOST_ETHER |
| 21 | #define CONFIG_USB_ETHER_ASIX | |
| d1a52860 TK |
22 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
| 23 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ | |
| 73448b1f KW |
24 | #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| 25 | #define CONFIG_MXC_USB_FLAGS 0 | |
| 26 | ||
| 8fe280f3 YL |
27 | #define CONFIG_PCA953X |
| 28 | #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} } | |
| 29 | ||
| c1747970 | 30 | #include "mx6sabre_common.h" |
| 51535d9f | 31 | |
| cdbdde3f FE |
32 | #undef CONFIG_SYS_NO_FLASH |
| 33 | #define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR | |
| 34 | #define CONFIG_SYS_FLASH_SECT_SIZE (128 * 1024) | |
| 35 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| 36 | #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ | |
| 37 | #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ | |
| 38 | #define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ | |
| 39 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/ | |
| 40 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 565cfcf0 | 41 | #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
| cdbdde3f | 42 | |
| de7d02ae SG |
43 | #define CONFIG_SYS_FSL_USDHC_NUM 2 |
| 44 | #if defined(CONFIG_ENV_IS_IN_MMC) | |
| 45 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 46 | #endif | |
| 47 | ||
| 19578165 | 48 | /* I2C Configs */ |
| b089d039 | 49 | #define CONFIG_SYS_I2C |
| 50 | #define CONFIG_SYS_I2C_MXC | |
| 03544c66 AA |
51 | #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ |
| 52 | #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ | |
| f8cb101e | 53 | #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ |
| 19578165 RF |
54 | #define CONFIG_SYS_I2C_SPEED 100000 |
| 55 | ||
| 83bb3215 YL |
56 | /* NAND flash command */ |
| 57 | #define CONFIG_CMD_NAND | |
| 58 | #define CONFIG_CMD_NAND_TRIMFFS | |
| 59 | ||
| 60 | /* NAND stuff */ | |
| 61 | #define CONFIG_NAND_MXS | |
| 62 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 63 | #define CONFIG_SYS_NAND_BASE 0x40000000 | |
| 64 | #define CONFIG_SYS_NAND_5_ADDR_CYCLE | |
| 65 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 66 | ||
| 67 | /* DMA stuff, needed for GPMI/MXS NAND support */ | |
| 68 | #define CONFIG_APBH_DMA | |
| 69 | #define CONFIG_APBH_DMA_BURST | |
| 70 | #define CONFIG_APBH_DMA_BURST8 | |
| 71 | ||
| 593243d3 YL |
72 | /* PMIC */ |
| 73 | #define CONFIG_POWER | |
| 74 | #define CONFIG_POWER_I2C | |
| 75 | #define CONFIG_POWER_PFUZE100 | |
| 76 | #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 | |
| 77 | ||
| 7dd6545d | 78 | #endif /* __MX6QSABREAUTO_CONFIG_H */ |