]>
Commit | Line | Data |
---|---|---|
bcfc7118 FE |
1 | /* |
2 | * Copyright (C) 2012 Freescale Semiconductor, Inc. | |
3 | * | |
4 | * Configuration settings for the Freescale i.MX6Q SabreSD board. | |
5 | * | |
1a459660 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
bcfc7118 FE |
7 | */ |
8 | ||
9 | #ifndef __MX6QSABRE_COMMON_CONFIG_H | |
10 | #define __MX6QSABRE_COMMON_CONFIG_H | |
11 | ||
8f393776 SW |
12 | #include "mx6_common.h" |
13 | ||
6c920ee9 YL |
14 | #define CONFIG_IMX6_THERMAL |
15 | ||
bcfc7118 | 16 | /* Size of malloc() pool */ |
58cc9787 | 17 | #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) |
bcfc7118 FE |
18 | |
19 | #define CONFIG_BOARD_EARLY_INIT_F | |
85449dbd | 20 | #define CONFIG_BOARD_LATE_INIT |
bcfc7118 FE |
21 | |
22 | #define CONFIG_MXC_UART | |
23 | ||
24 | /* MMC Configs */ | |
bcfc7118 | 25 | #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
bcfc7118 | 26 | |
bcfc7118 FE |
27 | #define CONFIG_CMD_PING |
28 | #define CONFIG_CMD_DHCP | |
29 | #define CONFIG_CMD_MII | |
bcfc7118 FE |
30 | #define CONFIG_FEC_MXC |
31 | #define CONFIG_MII | |
32 | #define IMX_FEC_BASE ENET_BASE_ADDR | |
33 | #define CONFIG_FEC_XCV_TYPE RGMII | |
34 | #define CONFIG_ETHPRIME "FEC" | |
35 | #define CONFIG_FEC_MXC_PHYADDR 1 | |
36 | ||
37 | #define CONFIG_PHYLIB | |
38 | #define CONFIG_PHY_ATHEROS | |
39 | ||
8bfa9c69 FE |
40 | #define CONFIG_CMD_SF |
41 | #ifdef CONFIG_CMD_SF | |
8bfa9c69 FE |
42 | #define CONFIG_SPI_FLASH_STMICRO |
43 | #define CONFIG_MXC_SPI | |
44 | #define CONFIG_SF_DEFAULT_BUS 0 | |
155fa9af | 45 | #define CONFIG_SF_DEFAULT_CS 0 |
8bfa9c69 FE |
46 | #define CONFIG_SF_DEFAULT_SPEED 20000000 |
47 | #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 | |
48 | #endif | |
49 | ||
bcfc7118 | 50 | /* Command definition */ |
85449dbd | 51 | #define CONFIG_CMD_BMODE |
bcfc7118 | 52 | |
03ce3302 OS |
53 | #ifdef CONFIG_SUPPORT_EMMC_BOOT |
54 | #define EMMC_ENV \ | |
55 | "emmcdev=2\0" \ | |
56 | "update_emmc_firmware=" \ | |
57 | "if test ${ip_dyn} = yes; then " \ | |
58 | "setenv get_cmd dhcp; " \ | |
59 | "else " \ | |
60 | "setenv get_cmd tftp; " \ | |
61 | "fi; " \ | |
62 | "if ${get_cmd} ${update_sd_firmware_filename}; then " \ | |
4bf83961 | 63 | "if mmc dev ${emmcdev} 1; then " \ |
03ce3302 OS |
64 | "setexpr fw_sz ${filesize} / 0x200; " \ |
65 | "setexpr fw_sz ${fw_sz} + 1; " \ | |
66 | "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ | |
03ce3302 OS |
67 | "fi; " \ |
68 | "fi\0" | |
69 | #else | |
70 | #define EMMC_ENV "" | |
71 | #endif | |
72 | ||
e6fc8995 PF |
73 | #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
74 | ||
bcfc7118 FE |
75 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
76 | "script=boot.scr\0" \ | |
f2e4288a | 77 | "image=zImage\0" \ |
e6fc8995 | 78 | "fdt_file=undefined\0" \ |
6584a1b5 | 79 | "fdt_addr=0x18000000\0" \ |
bf0c2245 OS |
80 | "boot_fdt=try\0" \ |
81 | "ip_dyn=yes\0" \ | |
51535d9f | 82 | "console=" CONFIG_CONSOLE_DEV "\0" \ |
bcfc7118 FE |
83 | "fdt_high=0xffffffff\0" \ |
84 | "initrd_high=0xffffffff\0" \ | |
acbb4457 | 85 | "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ |
7fb72c79 | 86 | "mmcpart=1\0" \ |
903e779c | 87 | "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ |
810d6df0 OS |
88 | "update_sd_firmware=" \ |
89 | "if test ${ip_dyn} = yes; then " \ | |
90 | "setenv get_cmd dhcp; " \ | |
91 | "else " \ | |
92 | "setenv get_cmd tftp; " \ | |
93 | "fi; " \ | |
94 | "if mmc dev ${mmcdev}; then " \ | |
95 | "if ${get_cmd} ${update_sd_firmware_filename}; then " \ | |
96 | "setexpr fw_sz ${filesize} / 0x200; " \ | |
97 | "setexpr fw_sz ${fw_sz} + 1; " \ | |
98 | "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ | |
99 | "fi; " \ | |
100 | "fi\0" \ | |
03ce3302 | 101 | EMMC_ENV \ |
bcfc7118 FE |
102 | "mmcargs=setenv bootargs console=${console},${baudrate} " \ |
103 | "root=${mmcroot}\0" \ | |
104 | "loadbootscript=" \ | |
105 | "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ | |
106 | "bootscript=echo Running bootscript from mmc ...; " \ | |
107 | "source\0" \ | |
f2e4288a | 108 | "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ |
bf0c2245 OS |
109 | "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ |
110 | "mmcboot=echo Booting from mmc ...; " \ | |
bcfc7118 | 111 | "run mmcargs; " \ |
bf0c2245 OS |
112 | "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ |
113 | "if run loadfdt; then " \ | |
f2e4288a | 114 | "bootz ${loadaddr} - ${fdt_addr}; " \ |
bf0c2245 OS |
115 | "else " \ |
116 | "if test ${boot_fdt} = try; then " \ | |
f2e4288a | 117 | "bootz; " \ |
bf0c2245 OS |
118 | "else " \ |
119 | "echo WARN: Cannot load the DT; " \ | |
120 | "fi; " \ | |
121 | "fi; " \ | |
122 | "else " \ | |
f2e4288a | 123 | "bootz; " \ |
bf0c2245 | 124 | "fi;\0" \ |
bcfc7118 FE |
125 | "netargs=setenv bootargs console=${console},${baudrate} " \ |
126 | "root=/dev/nfs " \ | |
127 | "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ | |
128 | "netboot=echo Booting from net ...; " \ | |
129 | "run netargs; " \ | |
bf0c2245 OS |
130 | "if test ${ip_dyn} = yes; then " \ |
131 | "setenv get_cmd dhcp; " \ | |
132 | "else " \ | |
133 | "setenv get_cmd tftp; " \ | |
134 | "fi; " \ | |
f2e4288a | 135 | "${get_cmd} ${image}; " \ |
bf0c2245 OS |
136 | "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ |
137 | "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ | |
f2e4288a | 138 | "bootz ${loadaddr} - ${fdt_addr}; " \ |
bf0c2245 OS |
139 | "else " \ |
140 | "if test ${boot_fdt} = try; then " \ | |
f2e4288a | 141 | "bootz; " \ |
bf0c2245 OS |
142 | "else " \ |
143 | "echo WARN: Cannot load the DT; " \ | |
144 | "fi; " \ | |
145 | "fi; " \ | |
146 | "else " \ | |
f2e4288a | 147 | "bootz; " \ |
e6fc8995 PF |
148 | "fi;\0" \ |
149 | "findfdt="\ | |
150 | "if test $fdt_file = undefined; then " \ | |
151 | "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \ | |
152 | "setenv fdt_file imx6q-sabreauto.dtb; fi; " \ | |
153 | "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \ | |
154 | "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \ | |
155 | "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \ | |
156 | "setenv fdt_file imx6q-sabresd.dtb; fi; " \ | |
157 | "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \ | |
158 | "setenv fdt_file imx6dl-sabresd.dtb; fi; " \ | |
159 | "if test $fdt_file = undefined; then " \ | |
160 | "echo WARNING: Could not determine dtb to use; fi; " \ | |
161 | "fi;\0" \ | |
162 | ||
bcfc7118 FE |
163 | |
164 | #define CONFIG_BOOTCOMMAND \ | |
e6fc8995 | 165 | "run findfdt;" \ |
bcfc7118 | 166 | "mmc dev ${mmcdev};" \ |
66300ac2 | 167 | "if mmc rescan; then " \ |
bcfc7118 FE |
168 | "if run loadbootscript; then " \ |
169 | "run bootscript; " \ | |
170 | "else " \ | |
f2e4288a | 171 | "if run loadimage; then " \ |
bcfc7118 FE |
172 | "run mmcboot; " \ |
173 | "else run netboot; " \ | |
174 | "fi; " \ | |
175 | "fi; " \ | |
176 | "else run netboot; fi" | |
177 | ||
178 | #define CONFIG_ARP_TIMEOUT 200UL | |
179 | ||
bcfc7118 FE |
180 | #define CONFIG_SYS_MEMTEST_START 0x10000000 |
181 | #define CONFIG_SYS_MEMTEST_END 0x10010000 | |
bec0160e | 182 | #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 |
bcfc7118 | 183 | |
bcfc7118 FE |
184 | #define CONFIG_STACKSIZE (128 * 1024) |
185 | ||
186 | /* Physical Memory Map */ | |
187 | #define CONFIG_NR_DRAM_BANKS 1 | |
188 | #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR | |
189 | ||
190 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM | |
191 | #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR | |
192 | #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE | |
193 | ||
194 | #define CONFIG_SYS_INIT_SP_OFFSET \ | |
195 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
196 | #define CONFIG_SYS_INIT_SP_ADDR \ | |
197 | (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) | |
198 | ||
056845c2 | 199 | /* Environment organization */ |
bcfc7118 FE |
200 | #define CONFIG_ENV_SIZE (8 * 1024) |
201 | ||
202 | #define CONFIG_ENV_IS_IN_MMC | |
203 | ||
204 | #if defined(CONFIG_ENV_IS_IN_MMC) | |
610efbe0 | 205 | #define CONFIG_ENV_OFFSET (8 * 64 * 1024) |
bcfc7118 FE |
206 | #endif |
207 | ||
04451ba3 FE |
208 | /* Framebuffer */ |
209 | #define CONFIG_VIDEO | |
210 | #define CONFIG_VIDEO_IPUV3 | |
211 | #define CONFIG_CFB_CONSOLE | |
212 | #define CONFIG_VGA_AS_SINGLE_DEVICE | |
213 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
214 | #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE | |
215 | #define CONFIG_VIDEO_BMP_RLE8 | |
216 | #define CONFIG_SPLASH_SCREEN | |
217 | #define CONFIG_SPLASH_SCREEN_ALIGN | |
218 | #define CONFIG_BMP_16BPP | |
219 | #define CONFIG_VIDEO_LOGO | |
220 | #define CONFIG_VIDEO_BMP_LOGO | |
221 | #define CONFIG_IPUV3_CLK 260000000 | |
222 | #define CONFIG_IMX_HDMI | |
223 | #define CONFIG_IMX_VIDEO_SKIP | |
224 | ||
d5eb6dcf | 225 | #ifndef CONFIG_SPL |
ad8aae82 FE |
226 | #define CONFIG_CI_UDC |
227 | #define CONFIG_USBD_HS | |
228 | #define CONFIG_USB_GADGET_DUALSPEED | |
229 | ||
230 | #define CONFIG_USB_GADGET | |
231 | #define CONFIG_CMD_USB_MASS_STORAGE | |
232 | #define CONFIG_USB_GADGET_MASS_STORAGE | |
233 | #define CONFIG_USBDOWNLOAD_GADGET | |
234 | #define CONFIG_USB_GADGET_VBUS_DRAW 2 | |
235 | ||
236 | #define CONFIG_G_DNL_VENDOR_NUM 0x0525 | |
237 | #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 | |
238 | #define CONFIG_G_DNL_MANUFACTURER "FSL" | |
d5eb6dcf | 239 | #endif |
ad8aae82 | 240 | |
bcfc7118 | 241 | #endif /* __MX6QSABRE_COMMON_CONFIG_H */ |