[people/ms/u-boot.git] / include / configs / mx6sxsabreauto.h

/*
 * Copyright 2014 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6SX Sabreauto board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6sx-sabreauto.dtb\0" \
	"fdt_addr=0x88000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)

#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE			SZ_2G

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* MMC Configuration */
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC3_BASE_ADDR

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		  100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* NAND flash command */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS

/* NAND stuff */
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE     1
#define CONFIG_SYS_NAND_BASE           0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Network */

#define CONFIG_FEC_MXC
#define CONFIG_MII

#define IMX_FEC_BASE			ENET2_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR          0x0

#define CONFIG_FEC_XCV_TYPE             RGMII
#define CONFIG_ETHPRIME                 "FEC"

#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS   0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif

#define CONFIG_IMX_THERMAL

#define CONFIG_FSL_QSPI
#ifdef CONFIG_FSL_QSPI
#define CONFIG_SYS_FSL_QSPI_AHB
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	40000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define FSL_QSPI_FLASH_SIZE		SZ_32M
#define FSL_QSPI_FLASH_NUM		2
#endif

#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_IS_IN_MMC

#define CONFIG_SYS_FSL_USDHC_NUM	2
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV		0  /*USDHC3*/
#endif

#define CONFIG_PCA953X
#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }

#endif				/* __CONFIG_H */
Commit	Line	Data
cf94a342 YL	1	/*
	2	* Copyright 2014 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX6SX Sabreauto board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
cf94a342 YL	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include "mx6_common.h"
	13
cf94a342 YL	14	/* Size of malloc() pool */
	15	#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
	16
	17	#define CONFIG_BOARD_EARLY_INIT_F
	18	#define CONFIG_BOARD_LATE_INIT
	19
	20	#define CONFIG_MXC_UART
	21	#define CONFIG_MXC_UART_BASE UART1_BASE
	22
	23	#define CONFIG_EXTRA_ENV_SETTINGS \
	24	"script=boot.scr\0" \
	25	"image=zImage\0" \
	26	"console=ttymxc0\0" \
	27	"fdt_high=0xffffffff\0" \
	28	"initrd_high=0xffffffff\0" \
	29	"fdt_file=imx6sx-sabreauto.dtb\0" \
	30	"fdt_addr=0x88000000\0" \
	31	"boot_fdt=try\0" \
	32	"ip_dyn=yes\0" \
	33	"mmcdev=0\0" \
	34	"mmcpart=1\0" \
	35	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	36	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	37	"root=${mmcroot}\0" \
	38	"loadbootscript=" \
	39	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	40	"bootscript=echo Running bootscript from mmc ...; " \
	41	"source\0" \
	42	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	43	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	44	"mmcboot=echo Booting from mmc ...; " \
	45	"run mmcargs; " \
	46	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	47	"if run loadfdt; then " \
	48	"bootz ${loadaddr} - ${fdt_addr}; " \
	49	"else " \
	50	"if test ${boot_fdt} = try; then " \
	51	"bootz; " \
	52	"else " \
	53	"echo WARN: Cannot load the DT; " \
	54	"fi; " \
	55	"fi; " \
	56	"else " \
	57	"bootz; " \
	58	"fi;\0" \
	59	"netargs=setenv bootargs console=${console},${baudrate} " \
	60	"root=/dev/nfs " \
	61	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	62	"netboot=echo Booting from net ...; " \
	63	"run netargs; " \
	64	"if test ${ip_dyn} = yes; then " \
	65	"setenv get_cmd dhcp; " \
	66	"else " \
	67	"setenv get_cmd tftp; " \
	68	"fi; " \
	69	"${get_cmd} ${image}; " \
	70	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	71	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	72	"bootz ${loadaddr} - ${fdt_addr}; " \
	73	"else " \
	74	"if test ${boot_fdt} = try; then " \
	75	"bootz; " \
	76	"else " \
	77	"echo WARN: Cannot load the DT; " \
78	"fi; " \
79	"fi; " \
80	"else " \
81	"bootz; " \
82	"fi;\0"
83
84	#define CONFIG_BOOTCOMMAND \
85	"mmc dev ${mmcdev};" \
86	"mmc dev ${mmcdev}; if mmc rescan; then " \
87	"if run loadbootscript; then " \
88	"run bootscript; " \
89	"else " \
90	"if run loadimage; then " \
91	"run mmcboot; " \
92	"else run netboot; " \
93	"fi; " \
94	"fi; " \
95	"else run netboot; fi"
96
97	/* Miscellaneous configurable options */
98	#define CONFIG_SYS_MEMTEST_START 0x80000000
99	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
100
101	#define CONFIG_STACKSIZE SZ_128K
102
103	/* Physical Memory Map */
104	#define CONFIG_NR_DRAM_BANKS 1
105	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
106	#define PHYS_SDRAM_SIZE SZ_2G
107
108	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
109	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
110	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
111
112	#define CONFIG_SYS_INIT_SP_OFFSET \
113	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
114	#define CONFIG_SYS_INIT_SP_ADDR \
115	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
116
117	/* MMC Configuration */
118	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
119
120	/* I2C Configs */
cf94a342 YL	121	#define CONFIG_SYS_I2C
	122	#define CONFIG_SYS_I2C_MXC
	123	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	124	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	125	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	126	#define CONFIG_SYS_I2C_SPEED 100000
	127
	128	/* PMIC */
	129	#define CONFIG_POWER
	130	#define CONFIG_POWER_I2C
	131	#define CONFIG_POWER_PFUZE100
	132	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	133
	134	/* NAND flash command */
	135	#define CONFIG_CMD_NAND
	136	#define CONFIG_CMD_NAND_TRIMFFS
	137
	138	/* NAND stuff */
	139	#define CONFIG_NAND_MXS
	140	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	141	#define CONFIG_SYS_NAND_BASE 0x40000000
	142	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	143	#define CONFIG_SYS_NAND_ONFI_DETECTION
	144
	145	/* DMA stuff, needed for GPMI/MXS NAND support */
	146	#define CONFIG_APBH_DMA
	147	#define CONFIG_APBH_DMA_BURST
	148	#define CONFIG_APBH_DMA_BURST8
	149
	150	/* Network */
cf94a342 YL	151
	152	#define CONFIG_FEC_MXC
	153	#define CONFIG_MII
	154
	155	#define IMX_FEC_BASE ENET2_BASE_ADDR
	156	#define CONFIG_FEC_MXC_PHYADDR 0x0
	157
	158	#define CONFIG_FEC_XCV_TYPE RGMII
	159	#define CONFIG_ETHPRIME "FEC"
	160
	161	#define CONFIG_PHYLIB
	162	#define CONFIG_PHY_ATHEROS
	163
cf94a342 YL	164	#ifdef CONFIG_CMD_USB
	165	#define CONFIG_USB_EHCI
	166	#define CONFIG_USB_EHCI_MX6
	167	#define CONFIG_USB_STORAGE
	168	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	169	#define CONFIG_USB_HOST_ETHER
	170	#define CONFIG_USB_ETHER_ASIX
	171	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	172	#define CONFIG_MXC_USB_FLAGS 0
	173	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	174	#endif
	175
	176	#define CONFIG_IMX_THERMAL
	177
cf94a342 YL	178	#define CONFIG_FSL_QSPI
cf94a342 YL	179	#ifdef CONFIG_FSL_QSPI
cf94a342 YL	180	#define CONFIG_SYS_FSL_QSPI_AHB
	181	#define CONFIG_SF_DEFAULT_BUS 0
	182	#define CONFIG_SF_DEFAULT_CS 0
	183	#define CONFIG_SF_DEFAULT_SPEED 40000000
	184	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	185	#define FSL_QSPI_FLASH_SIZE SZ_32M
	186	#define FSL_QSPI_FLASH_NUM 2
	187	#endif
	188
	189	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	190	#define CONFIG_ENV_SIZE SZ_8K
	191	#define CONFIG_ENV_IS_IN_MMC
	192
	193	#define CONFIG_SYS_FSL_USDHC_NUM 2
	194	#if defined(CONFIG_ENV_IS_IN_MMC)
	195	#define CONFIG_SYS_MMC_ENV_DEV 0 /USDHC3/
	196	#endif
	197
	198	#define CONFIG_PCA953X
	199	#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} }
	200
	201	#endif /* __CONFIG_H */