[people/ms/u-boot.git] / include / configs / mx6sxsabreauto.h

/*
 * Copyright 2014 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6SX Sabreauto board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6sx-sabreauto.dtb\0" \
	"fdt_addr=0x88000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)

#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* MMC Configuration */
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC3_BASE_ADDR

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		  100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* NAND flash command */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS

/* NAND stuff */
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE     1
#define CONFIG_SYS_NAND_BASE           0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Network */

#define CONFIG_FEC_MXC
#define CONFIG_MII

#define IMX_FEC_BASE			ENET2_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR          0x0

#define CONFIG_FEC_XCV_TYPE             RGMII
#define CONFIG_ETHPRIME                 "FEC"

#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS   0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif

#define CONFIG_IMX_THERMAL

#ifdef CONFIG_FSL_QSPI
#define CONFIG_SYS_FSL_QSPI_AHB
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	40000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define FSL_QSPI_FLASH_SIZE		SZ_32M
#define FSL_QSPI_FLASH_NUM		2
#endif

#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_IS_IN_MMC

#define CONFIG_SYS_FSL_USDHC_NUM	2
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV		0  /*USDHC3*/
#endif

#define CONFIG_PCA953X
#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }

#endif				/* __CONFIG_H */
Commit	Line	Data
cf94a342 YL	1	/*
	2	* Copyright 2014 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX6SX Sabreauto board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
cf94a342 YL	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include "mx6_common.h"
	13
cf94a342 YL	14	/* Size of malloc() pool */
	15	#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
	16
cf94a342 YL	17	#define CONFIG_MXC_UART
	18	#define CONFIG_MXC_UART_BASE UART1_BASE
	19
	20	#define CONFIG_EXTRA_ENV_SETTINGS \
	21	"script=boot.scr\0" \
	22	"image=zImage\0" \
	23	"console=ttymxc0\0" \
	24	"fdt_high=0xffffffff\0" \
	25	"initrd_high=0xffffffff\0" \
	26	"fdt_file=imx6sx-sabreauto.dtb\0" \
	27	"fdt_addr=0x88000000\0" \
	28	"boot_fdt=try\0" \
	29	"ip_dyn=yes\0" \
	30	"mmcdev=0\0" \
	31	"mmcpart=1\0" \
	32	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	33	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	34	"root=${mmcroot}\0" \
	35	"loadbootscript=" \
	36	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	37	"bootscript=echo Running bootscript from mmc ...; " \
	38	"source\0" \
	39	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	40	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	41	"mmcboot=echo Booting from mmc ...; " \
	42	"run mmcargs; " \
	43	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	44	"if run loadfdt; then " \
	45	"bootz ${loadaddr} - ${fdt_addr}; " \
	46	"else " \
	47	"if test ${boot_fdt} = try; then " \
	48	"bootz; " \
	49	"else " \
	50	"echo WARN: Cannot load the DT; " \
	51	"fi; " \
	52	"fi; " \
	53	"else " \
	54	"bootz; " \
	55	"fi;\0" \
	56	"netargs=setenv bootargs console=${console},${baudrate} " \
	57	"root=/dev/nfs " \
	58	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	59	"netboot=echo Booting from net ...; " \
	60	"run netargs; " \
	61	"if test ${ip_dyn} = yes; then " \
	62	"setenv get_cmd dhcp; " \
	63	"else " \
	64	"setenv get_cmd tftp; " \
	65	"fi; " \
	66	"${get_cmd} ${image}; " \
	67	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	68	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	69	"bootz ${loadaddr} - ${fdt_addr}; " \
	70	"else " \
	71	"if test ${boot_fdt} = try; then " \
	72	"bootz; " \
	73	"else " \
	74	"echo WARN: Cannot load the DT; " \
	75	"fi; " \
	76	"fi; " \
	77	"else " \
	78	"bootz; " \
	79	"fi;\0"
	80
81	#define CONFIG_BOOTCOMMAND \
82	"mmc dev ${mmcdev};" \
83	"mmc dev ${mmcdev}; if mmc rescan; then " \
84	"if run loadbootscript; then " \
85	"run bootscript; " \
86	"else " \
87	"if run loadimage; then " \
88	"run mmcboot; " \
89	"else run netboot; " \
90	"fi; " \
91	"fi; " \
92	"else run netboot; fi"
93
94	/* Miscellaneous configurable options */
95	#define CONFIG_SYS_MEMTEST_START 0x80000000
96	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
97
98	#define CONFIG_STACKSIZE SZ_128K
99
100	/* Physical Memory Map */
101	#define CONFIG_NR_DRAM_BANKS 1
102	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
cf94a342 YL	103
	104	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	105	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	106	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	107
	108	#define CONFIG_SYS_INIT_SP_OFFSET \
	109	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	110	#define CONFIG_SYS_INIT_SP_ADDR \
	111	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	112
	113	/* MMC Configuration */
	114	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
	115
	116	/* I2C Configs */
cf94a342 YL	117	#define CONFIG_SYS_I2C
	118	#define CONFIG_SYS_I2C_MXC
	119	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	120	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	121	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	122	#define CONFIG_SYS_I2C_SPEED 100000
	123
	124	/* PMIC */
	125	#define CONFIG_POWER
	126	#define CONFIG_POWER_I2C
	127	#define CONFIG_POWER_PFUZE100
	128	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	129
	130	/* NAND flash command */
	131	#define CONFIG_CMD_NAND
	132	#define CONFIG_CMD_NAND_TRIMFFS
	133
	134	/* NAND stuff */
	135	#define CONFIG_NAND_MXS
	136	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	137	#define CONFIG_SYS_NAND_BASE 0x40000000
	138	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	139	#define CONFIG_SYS_NAND_ONFI_DETECTION
	140
	141	/* DMA stuff, needed for GPMI/MXS NAND support */
	142	#define CONFIG_APBH_DMA
	143	#define CONFIG_APBH_DMA_BURST
	144	#define CONFIG_APBH_DMA_BURST8
	145
	146	/* Network */
cf94a342 YL	147
	148	#define CONFIG_FEC_MXC
	149	#define CONFIG_MII
	150
	151	#define IMX_FEC_BASE ENET2_BASE_ADDR
	152	#define CONFIG_FEC_MXC_PHYADDR 0x0
	153
	154	#define CONFIG_FEC_XCV_TYPE RGMII
	155	#define CONFIG_ETHPRIME "FEC"
	156
	157	#define CONFIG_PHYLIB
	158	#define CONFIG_PHY_ATHEROS
	159
cf94a342 YL	160	#ifdef CONFIG_CMD_USB
	161	#define CONFIG_USB_EHCI
	162	#define CONFIG_USB_EHCI_MX6
cf94a342 YL	163	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	164	#define CONFIG_USB_HOST_ETHER
	165	#define CONFIG_USB_ETHER_ASIX
	166	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	167	#define CONFIG_MXC_USB_FLAGS 0
	168	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	169	#endif
	170
	171	#define CONFIG_IMX_THERMAL
	172
cf94a342	173	#ifdef CONFIG_FSL_QSPI
cf94a342 YL	174	#define CONFIG_SYS_FSL_QSPI_AHB
	175	#define CONFIG_SF_DEFAULT_BUS 0
	176	#define CONFIG_SF_DEFAULT_CS 0
	177	#define CONFIG_SF_DEFAULT_SPEED 40000000
	178	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	179	#define FSL_QSPI_FLASH_SIZE SZ_32M
	180	#define FSL_QSPI_FLASH_NUM 2
	181	#endif
	182
	183	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	184	#define CONFIG_ENV_SIZE SZ_8K
	185	#define CONFIG_ENV_IS_IN_MMC
	186
	187	#define CONFIG_SYS_FSL_USDHC_NUM 2
	188	#if defined(CONFIG_ENV_IS_IN_MMC)
	189	#define CONFIG_SYS_MMC_ENV_DEV 0 /USDHC3/
	190	#endif
	191
	192	#define CONFIG_PCA953X
	193	#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} }
	194
	195	#endif /* __CONFIG_H */