[people/ms/u-boot.git] / include / configs / mx6ullevk.h

/*
 * Copyright (C) 2016 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __MX6ULLEVK_CONFIG_H
#define __MX6ULLEVK_CONFIG_H


#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include "mx6_common.h"
#include <asm/mach-imx/gpio.h>

#ifdef CONFIG_SECURE_BOOT
#ifndef CONFIG_CSF_SIZE
#define CONFIG_CSF_SIZE 0x4000
#endif
#endif

#define PHYS_SDRAM_SIZE	SZ_512M

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* MMC Configs */
#ifdef CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR

/* NAND pin conflicts with usdhc2 */
#ifdef CONFIG_SYS_USE_NAND
#define CONFIG_SYS_FSL_USDHC_NUM	1
#else
#define CONFIG_SYS_FSL_USDHC_NUM	2
#endif
#endif

/* I2C configs */
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED		100000
#endif

#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6ull-14x14-evk.dtb\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* environment organization */
#define CONFIG_SYS_MMC_ENV_DEV		1	/* USDHC2 */
#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */

#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_OFFSET		(12 * SZ_64K)

#define CONFIG_IMX_THERMAL

#define CONFIG_IOMUX_LPSR

#define CONFIG_SOFT_SPI

#ifdef CONFIG_FSL_QSPI
#define CONFIG_SYS_FSL_QSPI_AHB
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	40000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define FSL_QSPI_FLASH_NUM		1
#define FSL_QSPI_FLASH_SIZE		SZ_32M
#endif

#endif
Commit	Line	Data
55a42b33 PF	1	/*
	2	* Copyright (C) 2016 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8	#ifndef __MX6ULLEVK_CONFIG_H
	9	#define __MX6ULLEVK_CONFIG_H
	10
	11
	12	#include <asm/arch/imx-regs.h>
	13	#include <linux/sizes.h>
	14	#include "mx6_common.h"
552a848e	15	#include <asm/mach-imx/gpio.h>
55a42b33 PF	16
	17	#ifdef CONFIG_SECURE_BOOT
	18	#ifndef CONFIG_CSF_SIZE
	19	#define CONFIG_CSF_SIZE 0x4000
	20	#endif
	21	#endif
	22
	23	#define PHYS_SDRAM_SIZE SZ_512M
	24
	25	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	26
55a42b33 PF	27	/* Size of malloc() pool */
	28	#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
	29
55a42b33 PF	30	#define CONFIG_MXC_UART
	31	#define CONFIG_MXC_UART_BASE UART1_BASE
	32
	33	/* MMC Configs */
	34	#ifdef CONFIG_FSL_USDHC
	35	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
	36
	37	/* NAND pin conflicts with usdhc2 */
	38	#ifdef CONFIG_SYS_USE_NAND
	39	#define CONFIG_SYS_FSL_USDHC_NUM 1
	40	#else
	41	#define CONFIG_SYS_FSL_USDHC_NUM 2
	42	#endif
	43	#endif
	44
	45	/* I2C configs */
	46	#ifdef CONFIG_CMD_I2C
	47	#define CONFIG_SYS_I2C_MXC
	48	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	49	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	50	#define CONFIG_SYS_I2C_SPEED 100000
	51	#endif
	52
	53	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	54
	55	#define CONFIG_EXTRA_ENV_SETTINGS \
	56	"script=boot.scr\0" \
	57	"image=zImage\0" \
	58	"console=ttymxc0\0" \
	59	"fdt_high=0xffffffff\0" \
	60	"initrd_high=0xffffffff\0" \
	61	"fdt_file=imx6ull-14x14-evk.dtb\0" \
	62	"fdt_addr=0x83000000\0" \
	63	"boot_fdt=try\0" \
	64	"ip_dyn=yes\0" \
	65	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
	66	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	67	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	68	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	69	"mmcautodetect=yes\0" \
	70	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	71	"root=${mmcroot}\0" \
	72	"loadbootscript=" \
	73	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	74	"bootscript=echo Running bootscript from mmc ...; " \
	75	"source\0" \
	76	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	77	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	78	"mmcboot=echo Booting from mmc ...; " \
	79	"run mmcargs; " \
	80	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	81	"if run loadfdt; then " \
	82	"bootz ${loadaddr} - ${fdt_addr}; " \
	83	"else " \
	84	"if test ${boot_fdt} = try; then " \
	85	"bootz; " \
	86	"else " \
	87	"echo WARN: Cannot load the DT; " \
	88	"fi; " \
	89	"fi; " \
	90	"else " \
	91	"bootz; " \
	92	"fi;\0" \
	93	"netargs=setenv bootargs console=${console},${baudrate} " \
94	"root=/dev/nfs " \
95	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
96	"netboot=echo Booting from net ...; " \
97	"run netargs; " \
98	"if test ${ip_dyn} = yes; then " \
99	"setenv get_cmd dhcp; " \
100	"else " \
101	"setenv get_cmd tftp; " \
102	"fi; " \
103	"${get_cmd} ${image}; " \
104	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
105	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
106	"bootz ${loadaddr} - ${fdt_addr}; " \
107	"else " \
108	"if test ${boot_fdt} = try; then " \
109	"bootz; " \
110	"else " \
111	"echo WARN: Cannot load the DT; " \
112	"fi; " \
113	"fi; " \
114	"else " \
115	"bootz; " \
116	"fi;\0" \
117
118	#define CONFIG_BOOTCOMMAND \
119	"mmc dev ${mmcdev};" \
120	"mmc dev ${mmcdev}; if mmc rescan; then " \
121	"if run loadbootscript; then " \
122	"run bootscript; " \
123	"else " \
124	"if run loadimage; then " \
125	"run mmcboot; " \
126	"else run netboot; " \
127	"fi; " \
128	"fi; " \
129	"else run netboot; fi"
130
131	/* Miscellaneous configurable options */
132	#define CONFIG_SYS_MEMTEST_START 0x80000000
133	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
134
135	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
136	#define CONFIG_SYS_HZ 1000
137
55a42b33 PF	138	/* Physical Memory Map */
	139	#define CONFIG_NR_DRAM_BANKS 1
	140	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	141
	142	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	143	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	144	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	145
	146	#define CONFIG_SYS_INIT_SP_OFFSET \
	147	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	148	#define CONFIG_SYS_INIT_SP_ADDR \
	149	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	150
e856bdcf	151	/* environment organization */
55a42b33 PF	152	#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
	153	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
	154	#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
	155
55a42b33 PF	156	#define CONFIG_ENV_SIZE SZ_8K
	157	#define CONFIG_ENV_OFFSET (12 * SZ_64K)
	158
55a42b33 PF	159	#define CONFIG_IMX_THERMAL
	160
	161	#define CONFIG_IOMUX_LPSR
	162
	163	#define CONFIG_SOFT_SPI
	164
a3cc4355 PF	165	#ifdef CONFIG_FSL_QSPI
	166	#define CONFIG_SYS_FSL_QSPI_AHB
	167	#define CONFIG_SF_DEFAULT_BUS 0
	168	#define CONFIG_SF_DEFAULT_CS 0
	169	#define CONFIG_SF_DEFAULT_SPEED 40000000
	170	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	171	#define FSL_QSPI_FLASH_NUM 1
	172	#define FSL_QSPI_FLASH_SIZE SZ_32M
	173	#endif
	174
55a42b33	175	#endif