[people/ms/u-boot.git] / include / configs / nas220.h

/*
 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
 *
 * based on work from:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_NAS220_H
#define _CONFIG_NAS220_H

/*
 * Machine type ID
 */
#define CONFIG_MACH_TYPE		MACH_TYPE_RD88F6192_NAS

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* #define CPU Core subversion */
#define CONFIG_KW88F6192		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/* power-on led, regulator, sata0, sata1 */
#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
#define NAS220_GE_OE_VAL_HIGH (0)
#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
#define NAS220_GE_OE_HIGH (~(0))

/* PHY related */
#define MV88E1116_LED_FCTRL_REG		10
#define MV88E1116_CPRSP_CR3_REG		21
#define MV88E1116_MAC_CTRL_REG		21
#define MV88E1116_PGADR_REG		22
#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)

/*
 * Commands configuration
 */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_SECT_SIZE 0x10000
#endif

#define CONFIG_ENV_SIZE	0x10000
#define CONFIG_ENV_OFFSET 0xa0000

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND ""

#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootargs=console=ttyS0,115200\0" \
	"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
	"0x010000@0xa0000(env),"\
	"0x500000@0xc0000(uimage),"\
	"0x1a40000@0x5c0000(rootfs)\0" \
	"mtdids=nand0=orion_nand\0"\
	"bootdelay=-1\0"\
	"autostart=no\0"\
	"autoload=no\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */

/*
 * USB/EHCI
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
#define CONFIG_EHCI_IS_TDI
#endif /* CONFIG_CMD_USB */

/*
 * File system
 */
#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_LZO
#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS

/*
 * SATA
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
#endif

/*
 * EFI partition
 */

/*
 *  Date Time
 */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */

#define CONFIG_KIRKWOOD_GPIO

#endif /* _CONFIG_NAS220_H */
Commit	Line	Data
9637c4b2 ED	1	/*
	2	* Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
	3	*
	4	* based on work from:
	5	* (C) Copyright 2009
	6	* Marvell Semiconductor <www.marvell.com>
	7	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef _CONFIG_NAS220_H
	13	#define _CONFIG_NAS220_H
	14
	15	/*
92a1babf	16	* Machine type ID
9637c4b2	17	*/
92a1babf	18	#define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS
9637c4b2 ED	19
	20	/*
	21	* High Level Configuration Options (easy to change)
	22	*/
	23	#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
	24	#define CONFIG_KW88F6192 /* SOC Name */
9637c4b2 ED	25	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	26
	27	/* power-on led, regulator, sata0, sata1 */
	28	#define NAS220_GE_OE_VAL_LOW ((1 << 12)\|(1 << 14)\|(1 << 24)\|(1 << 28))
	29	#define NAS220_GE_OE_VAL_HIGH (0)
	30	#define NAS220_GE_OE_LOW (~((1 << 12)\|(1 << 14)\|(1 << 24)\|(1 << 28)))
	31	#define NAS220_GE_OE_HIGH (~(0))
	32
	33	/* PHY related */
	34	#define MV88E1116_LED_FCTRL_REG 10
	35	#define MV88E1116_CPRSP_CR3_REG 21
	36	#define MV88E1116_MAC_CTRL_REG 21
	37	#define MV88E1116_PGADR_REG 22
	38	#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
	39	#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
	40
	41	/*
	42	* Commands configuration
	43	*/
9637c4b2 ED	44
	45	/*
	46	* mv-common.h should be defined after CMD configs since it used them
	47	* to enable certain macros
	48	*/
	49	#include "mv-common.h"
	50
9637c4b2 ED	51	/*
	52	* Environment variables configurations
	53	*/
	54	#ifdef CONFIG_CMD_NAND
9637c4b2	55	#define CONFIG_ENV_SECT_SIZE 0x10000
9637c4b2 ED	56	#endif
	57
	58	#define CONFIG_ENV_SIZE 0x10000
	59	#define CONFIG_ENV_OFFSET 0xa0000
	60
	61	/*
	62	* Default environment variables
	63	*/
	64	#define CONFIG_BOOTCOMMAND ""
	65
	66	#define CONFIG_EXTRA_ENV_SETTINGS \
	67	"bootargs=console=ttyS0,115200\0" \
	68	"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
	69	"0x010000@0xa0000(env),"\
	70	"0x500000@0xc0000(uimage),"\
	71	"0x1a40000@0x5c0000(rootfs)\0" \
	72	"mtdids=nand0=orion_nand\0"\
	73	"bootdelay=-1\0"\
	74	"autostart=no\0"\
	75	"autoload=no\0"
	76
	77	/*
	78	* Ethernet Driver configuration
	79	*/
	80	#ifdef CONFIG_CMD_NET
	81	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	82	#define CONFIG_PHY_BASE_ADR 8
	83	#endif /* CONFIG_CMD_NET */
	84
	85	/*
	86	* USB/EHCI
	87	*/
	88	#ifdef CONFIG_CMD_USB
9637c4b2 ED	89	#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
9637c4b2 ED	90	#define CONFIG_EHCI_IS_TDI
9637c4b2 ED	91	#endif /* CONFIG_CMD_USB */
	92
	93	/*
	94	* File system
	95	*/
9637c4b2 ED	96	#define CONFIG_JFFS2_NAND
9637c4b2 ED	97	#define CONFIG_JFFS2_LZO
9637c4b2 ED	98	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
9637c4b2 ED	99	#define CONFIG_MTD_PARTITIONS
9637c4b2 ED	100
	101	/*
	102	* SATA
	103	*/
	104	#ifdef CONFIG_MVSATA_IDE
	105	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	106	#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
	107	#endif
	108
9637c4b2 ED	109	/*
	110	* EFI partition
	111	*/
9637c4b2 ED	112
	113	/*
	114	* Date Time
	115	*/
	116	#ifdef CONFIG_CMD_DATE
	117	#define CONFIG_RTC_MV
	118	#endif /* CONFIG_CMD_DATE */
	119
	120	#define CONFIG_KIRKWOOD_GPIO
	121
	122	#endif /* _CONFIG_NAS220_H */
	123