]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/nios2-generic.h
cfi_flash: convert to driver model
[people/ms/u-boot.git] / include / configs / nios2-generic.h
CommitLineData
8cbb0ddd
TC
1/*
2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
4 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5 *
3765b3e7 6 * SPDX-License-Identifier: GPL-2.0+
8cbb0ddd
TC
7 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12/*
13 * BOARD/CPU
14 */
5ff10aa7 15#define CONFIG_DISPLAY_CPUINFO
ca844dd8 16#define CONFIG_DISPLAY_BOARDINFO_LATE
8cbb0ddd
TC
17
18/*
19 * SERIAL
20 */
da2f838d 21#define CONFIG_BAUDRATE 115200
8cbb0ddd
TC
22#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
23
6168dc6a
TC
24/*
25 * CFI Flash
26 */
27#define CONFIG_SYS_FLASH_BASE 0xe0000000
28#define CONFIG_FLASH_CFI_DRIVER
29#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
30#define CONFIG_SYS_FLASH_CFI
31#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
32#define CONFIG_SYS_FLASH_PROTECTION
33#define CONFIG_SYS_MAX_FLASH_BANKS 1
34#define CONFIG_SYS_MAX_FLASH_SECT 512
35
96fa1e43
TC
36/*
37 * MII/PHY
38 */
e07eee39
TC
39#define CONFIG_CMD_MII
40#define CONFIG_PHY_GIGE
41#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
42#define CONFIG_PHY_MARVELL
96fa1e43 43
8cbb0ddd
TC
44/*
45 * BOOTP options
46 */
47#define CONFIG_BOOTP_BOOTFILESIZE
48#define CONFIG_BOOTP_BOOTPATH
49#define CONFIG_BOOTP_GATEWAY
50#define CONFIG_BOOTP_HOSTNAME
51
52/*
ca1d80c0 53 * FDT options
8cbb0ddd 54 */
857b9cb6
TC
55#define CONFIG_OF_LIBFDT
56#define CONFIG_OF_BOARD_SETUP
57#define CONFIG_LMB
58
8cbb0ddd
TC
59/*
60 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
61 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
62 * reset address, no? This will keep the environment in user region
63 * of flash. NOTE: the monitor length must be multiple of sector size
64 * (which is common practice).
65 */
66#define CONFIG_ENV_IS_IN_FLASH
67
6168dc6a 68#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
8cbb0ddd 69#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
6168dc6a 70#define CONFIG_ENV_ADDR 0xe2840000
8cbb0ddd
TC
71
72/*
73 * MEMORY ORGANIZATION
7dfb0602
TC
74 * -Monitor at top of sdram.
75 * -The heap is placed below the monitor
76 * -The stack is placed below the heap (&grows down).
8cbb0ddd 77 */
6168dc6a
TC
78#define CONFIG_SYS_SDRAM_BASE 0xD0000000
79#define CONFIG_SYS_SDRAM_SIZE 0x08000000
744b57b8 80#define CONFIG_NR_DRAM_BANKS 1
8cbb0ddd
TC
81#define CONFIG_MONITOR_IS_IN_RAM
82#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
83#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
84 CONFIG_SYS_SDRAM_SIZE - \
85 CONFIG_SYS_MONITOR_LEN)
2925e2b9 86#define CONFIG_SYS_MALLOC_LEN 0x20000
8cbb0ddd
TC
87
88/*
89 * MISC
90 */
91#define CONFIG_SYS_LONGHELP /* Provide extended help */
8cbb0ddd
TC
92#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
93#define CONFIG_SYS_MAXARGS 16 /* Max command args */
94#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
95#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
96 sizeof(CONFIG_SYS_PROMPT) + \
97 16) /* Print buf size */
98#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
99#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
540bb542
TC
100#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
101 CONFIG_ENV_SIZE - \
102 CONFIG_SYS_MALLOC_LEN - \
103 0x10000)
8cbb0ddd 104#define CONFIG_CMDLINE_EDITING
88d5ecf4 105#define CONFIG_CMD_GPIO
8cbb0ddd 106
8cbb0ddd 107#endif /* __CONFIG_H */