[people/ms/u-boot.git] / include / configs / nitrogen6x.h

/*
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Boundary Devices Nitrogen6X
 * and Freescale i.MX6Q Sabre Lite boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	3769

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_CS   0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       2

#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#endif

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE

/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
#define CONFIG_BMP_16BPP
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_PREBOOT                 ""

#ifdef CONFIG_CMD_SATA
#define CONFIG_DRIVE_SATA "sata "
#else
#define CONFIG_DRIVE_SATA
#endif

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#ifdef CONFIG_USB_STORAGE
#define CONFIG_DRIVE_USB "usb "
#else
#define CONFIG_DRIVE_USB
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6q-sabrelite.dtb\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdevs=0 1\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"for mmcdev in ${mmcdevs}; do " \
		"mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"if run loadbootscript; then " \
				"run bootscript; " \
			"else " \
				"if run loaduimage; then " \
					"run mmcboot; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"done; " \
	"run netboot; "
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
	"umsdevs=" CONFIG_UMSDEVS "\0" \
	"console=ttymxc1\0" \
	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
		"sf erase 0xc0000 0x2000 && " \
		"echo restored environment to factory default ; fi\0" \
	"bootcmd=for dtype in ${bootdevs}" \
		"; do " \
			"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
				"usb start ;" \
			"fi; " \
			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
				"load " \
					"${dtype} ${disk}:1 " \
					"10008000 " \
					"/6x_bootscript" \
					"&& source 10008000 ; " \
			"done ; " \
		"done; " \
		"setenv stdout serial,vga ; " \
		"echo ; echo 6x_bootscript not found ; " \
		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
		"echo details at http://boundarydevices.com/6q_bootscript ; " \
		"setenv stdout serial;" \
		"setenv stdin serial,usbkbd;" \
		"for dtype in ${umsdevs} ; do " \
			"if itest.s sata == ${dtype}; then " \
				"initcmd='sata init' ;" \
			"else " \
				"initcmd='mmc rescan' ;" \
			"fi; " \
			"for disk in 0 1 ; do " \
				"if $initcmd && $dtype dev $disk ; then " \
					"setenv stdout serial,vga; " \
					"echo expose ${dtype} ${disk} " \
						"over USB; " \
					"ums 0 $dtype $disk ;" \
				"fi; " \
		"	done; " \
		"done ;" \
		"setenv stdout serial,vga; " \
		"echo no block devices found;" \
		"\0" \
	"initrd_high=0xffffffff\0" \
	"upgradeu=for dtype in ${bootdevs}" \
		"; do " \
		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
			"load ${dtype} ${disk}:1 10008000 " \
				"/6x_upgrade " \
				"&& source 10008000 ; " \
		"done ; " \
	"done\0" \

#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_SABRELITE)
#define CONFIG_ENV_IS_IN_MMC
#else
#define CONFIG_ENV_IS_IN_SPI_FLASH
#endif

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#define CONFIG_CMD_BMP

#define CONFIG_CMD_TIME
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_ALT_MEMTEST

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#endif


#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_VBUS_DRAW	2

/* Netchip IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Boundary"

#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000

#endif	       /* __CONFIG_H */
Commit	Line	Data
d67b0d97 EN	1	/*
	2	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Boundary Devices Nitrogen6X
	5	* and Freescale i.MX6Q Sabre Lite boards.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
d67b0d97 EN	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
02824dc7	13	#include "mx6_common.h"
d67b0d97 EN	14
	15	#define CONFIG_MACH_TYPE 3769
	16
d67b0d97 EN	17	/* Size of malloc() pool */
	18	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	19
	20	#define CONFIG_BOARD_EARLY_INIT_F
	21	#define CONFIG_MISC_INIT_R
f016f8ca	22	#define CONFIG_CI_UDC
f3d7cff5 TK	23	#define CONFIG_USBD_HS
	24	#define CONFIG_USB_GADGET_DUALSPEED
	25	#define CONFIG_USB_ETHER
	26	#define CONFIG_USB_ETH_CDC
	27	#define CONFIG_NETCONSOLE
d67b0d97 EN	28
	29	#define CONFIG_MXC_UART
	30	#define CONFIG_MXC_UART_BASE UART2_BASE
	31
	32	#define CONFIG_CMD_SF
	33	#ifdef CONFIG_CMD_SF
d67b0d97 EN	34	#define CONFIG_MXC_SPI
d67b0d97 EN	35	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	36	#define CONFIG_SF_DEFAULT_CS 0
d67b0d97 EN	37	#define CONFIG_SF_DEFAULT_SPEED 25000000
	38	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	39	#endif
	40
	41	/* I2C Configs */
	42	#define CONFIG_CMD_I2C
b089d039	43	#define CONFIG_SYS_I2C
b089d039	44	#define CONFIG_SYS_I2C_MXC
03544c66 AA	45	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	46	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	47	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
d67b0d97	48	#define CONFIG_SYS_I2C_SPEED 100000
5dbdc3cf	49	#define CONFIG_I2C_EDID
d67b0d97	50
d67b0d97	51	/* MMC Configs */
d67b0d97 EN	52	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	53	#define CONFIG_SYS_FSL_USDHC_NUM 2
	54
d67b0d97 EN	55	#ifdef CONFIG_MX6Q
	56	#define CONFIG_CMD_SATA
	57	#endif
	58
	59	/*
	60	* SATA Configs
	61	*/
	62	#ifdef CONFIG_CMD_SATA
	63	#define CONFIG_DWC_AHSATA
	64	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	65	#define CONFIG_DWC_AHSATA_PORT_ID 0
	66	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	67	#define CONFIG_LBA48
	68	#define CONFIG_LIBATA
	69	#endif
	70
	71	#define CONFIG_CMD_PING
	72	#define CONFIG_CMD_DHCP
	73	#define CONFIG_CMD_MII
d67b0d97 EN	74	#define CONFIG_FEC_MXC
	75	#define CONFIG_MII
	76	#define IMX_FEC_BASE ENET_BASE_ADDR
	77	#define CONFIG_FEC_XCV_TYPE RGMII
	78	#define CONFIG_ETHPRIME "FEC"
	79	#define CONFIG_FEC_MXC_PHYADDR 6
	80	#define CONFIG_PHYLIB
	81	#define CONFIG_PHY_MICREL
	82	#define CONFIG_PHY_MICREL_KSZ9021
	83
	84	/* USB Configs */
	85	#define CONFIG_CMD_USB
d67b0d97 EN	86	#define CONFIG_USB_EHCI
	87	#define CONFIG_USB_EHCI_MX6
	88	#define CONFIG_USB_STORAGE
	89	#define CONFIG_USB_HOST_ETHER
	90	#define CONFIG_USB_ETHER_ASIX
a743415f	91	#define CONFIG_USB_ETHER_MCS7830
d67b0d97	92	#define CONFIG_USB_ETHER_SMSC95XX
d1a52860 TK	93	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
d1a52860 TK	94	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
d67b0d97 EN	95	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
d67b0d97 EN	96	#define CONFIG_MXC_USB_FLAGS 0
c36c0008 EN	97	#define CONFIG_USB_KEYBOARD
c36c0008 EN	98	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
d67b0d97 EN	99
	100	/* Miscellaneous commands */
	101	#define CONFIG_CMD_BMODE
d67b0d97 EN	102
	103	/* Framebuffer and LCD */
	104	#define CONFIG_VIDEO
	105	#define CONFIG_VIDEO_IPUV3
	106	#define CONFIG_CFB_CONSOLE
	107	#define CONFIG_VGA_AS_SINGLE_DEVICE
	108	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	109	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	110	#define CONFIG_VIDEO_BMP_RLE8
	111	#define CONFIG_SPLASH_SCREEN
761bc195 EN	112	#define CONFIG_SPLASH_SCREEN_ALIGN
	113	#define CONFIG_VIDEO_BMP_GZIP
	114	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
d67b0d97	115	#define CONFIG_BMP_16BPP
d67b0d97 EN	116	#define CONFIG_IPUV3_CLK 260000000
	117	#define CONFIG_CMD_HDMIDETECT
	118	#define CONFIG_CONSOLE_MUX
5ea7f0e3	119	#define CONFIG_IMX_HDMI
a47e4495	120	#define CONFIG_IMX_VIDEO_SKIP
d67b0d97	121
d67b0d97 EN	122	#define CONFIG_PREBOOT ""
d67b0d97 EN	123
d67b0d97 EN	124	#ifdef CONFIG_CMD_SATA
	125	#define CONFIG_DRIVE_SATA "sata "
	126	#else
	127	#define CONFIG_DRIVE_SATA
	128	#endif
	129
	130	#ifdef CONFIG_CMD_MMC
	131	#define CONFIG_DRIVE_MMC "mmc "
	132	#else
	133	#define CONFIG_DRIVE_MMC
	134	#endif
	135
5b7103e0 DR	136	#ifdef CONFIG_USB_STORAGE
	137	#define CONFIG_DRIVE_USB "usb "
	138	#else
	139	#define CONFIG_DRIVE_USB
	140	#endif
	141
	142	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
8d97b3ad	143	#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
d67b0d97	144
f8b1e86d FE	145	#if defined(CONFIG_SABRELITE)
	146	#define CONFIG_EXTRA_ENV_SETTINGS \
	147	"script=boot.scr\0" \
	148	"uimage=uImage\0" \
	149	"console=ttymxc1\0" \
	150	"fdt_high=0xffffffff\0" \
	151	"initrd_high=0xffffffff\0" \
	152	"fdt_file=imx6q-sabrelite.dtb\0" \
6584a1b5	153	"fdt_addr=0x18000000\0" \
f8b1e86d FE	154	"boot_fdt=try\0" \
f8b1e86d FE	155	"ip_dyn=yes\0" \
05d1c245	156	"mmcdevs=0 1\0" \
f8b1e86d FE	157	"mmcpart=1\0" \
	158	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	159	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	160	"root=${mmcroot}\0" \
	161	"loadbootscript=" \
3ee96c7d	162	"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
f8b1e86d FE	163	"bootscript=echo Running bootscript from mmc ...; " \
f8b1e86d FE	164	"source\0" \
3ee96c7d GG	165	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
3ee96c7d GG	166	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
f8b1e86d FE	167	"mmcboot=echo Booting from mmc ...; " \
	168	"run mmcargs; " \
	169	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	170	"if run loadfdt; then " \
	171	"bootm ${loadaddr} - ${fdt_addr}; " \
	172	"else " \
	173	"if test ${boot_fdt} = try; then " \
	174	"bootm; " \
	175	"else " \
	176	"echo WARN: Cannot load the DT; " \
	177	"fi; " \
	178	"fi; " \
	179	"else " \
	180	"bootm; " \
	181	"fi;\0" \
	182	"netargs=setenv bootargs console=${console},${baudrate} " \
	183	"root=/dev/nfs " \
	184	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	185	"netboot=echo Booting from net ...; " \
	186	"run netargs; " \
	187	"if test ${ip_dyn} = yes; then " \
	188	"setenv get_cmd dhcp; " \
	189	"else " \
	190	"setenv get_cmd tftp; " \
	191	"fi; " \
	192	"${get_cmd} ${uimage}; " \
	193	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	194	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	195	"bootm ${loadaddr} - ${fdt_addr}; " \
	196	"else " \
	197	"if test ${boot_fdt} = try; then " \
	198	"bootm; " \
	199	"else " \
	200	"echo WARN: Cannot load the DT; " \
	201	"fi; " \
	202	"fi; " \
	203	"else " \
	204	"bootm; " \
	205	"fi;\0"
	206
	207	#define CONFIG_BOOTCOMMAND \
05d1c245 GG	208	"for mmcdev in ${mmcdevs}; do " \
	209	"mmc dev ${mmcdev}; " \
	210	"if mmc rescan; then " \
	211	"if run loadbootscript; then " \
	212	"run bootscript; " \
	213	"else " \
	214	"if run loaduimage; then " \
	215	"run mmcboot; " \
	216	"fi; " \
	217	"fi; " \
	218	"fi; " \
	219	"done; " \
	220	"run netboot; "
f8b1e86d	221	#else
d67b0d97	222	#define CONFIG_EXTRA_ENV_SETTINGS \
5b7103e0	223	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
8d97b3ad	224	"umsdevs=" CONFIG_UMSDEVS "\0" \
d67b0d97 EN	225	"console=ttymxc1\0" \
	226	"clearenv=if sf probe \|\| sf probe \|\| sf probe 1 ; then " \
	227	"sf erase 0xc0000 0x2000 && " \
	228	"echo restored environment to factory default ; fi\0" \
5b7103e0	229	"bootcmd=for dtype in ${bootdevs}" \
d67b0d97	230	"; do " \
5b7103e0 DR	231	"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
	232	"usb start ;" \
	233	"fi; " \
d67b0d97	234	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	235	"load " \
	236	"${dtype} ${disk}:1 " \
	237	"10008000 " \
	238	"/6x_bootscript" \
	239	"&& source 10008000 ; " \
d67b0d97 EN	240	"done ; " \
	241	"done; " \
	242	"setenv stdout serial,vga ; " \
	243	"echo ; echo 6x_bootscript not found ; " \
	244	"echo ; echo serial console at 115200, 8N1 ; echo ; " \
	245	"echo details at http://boundarydevices.com/6q_bootscript ; " \
8d97b3ad EN	246	"setenv stdout serial;" \
	247	"setenv stdin serial,usbkbd;" \
	248	"for dtype in ${umsdevs} ; do " \
	249	"if itest.s sata == ${dtype}; then " \
	250	"initcmd='sata init' ;" \
	251	"else " \
	252	"initcmd='mmc rescan' ;" \
	253	"fi; " \
	254	"for disk in 0 1 ; do " \
	255	"if $initcmd && $dtype dev $disk ; then " \
	256	"setenv stdout serial,vga; " \
	257	"echo expose ${dtype} ${disk} " \
	258	"over USB; " \
	259	"ums 0 $dtype $disk ;" \
	260	"fi; " \
	261	" done; " \
	262	"done ;" \
	263	"setenv stdout serial,vga; " \
	264	"echo no block devices found;" \
	265	"\0" \
8145ccc3	266	"initrd_high=0xffffffff\0" \
5b7103e0	267	"upgradeu=for dtype in ${bootdevs}" \
d67b0d97 EN	268	"; do " \
d67b0d97 EN	269	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	270	"load ${dtype} ${disk}:1 10008000 " \
	271	"/6x_upgrade " \
	272	"&& source 10008000 ; " \
d67b0d97 EN	273	"done ; " \
	274	"done\0" \
	275
f8b1e86d	276	#endif
d67b0d97	277	/* Miscellaneous configurable options */
d67b0d97 EN	278	#define CONFIG_SYS_MEMTEST_START 0x10000000
	279	#define CONFIG_SYS_MEMTEST_END 0x10010000
	280	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	281
d67b0d97 EN	282	/* Physical Memory Map */
	283	#define CONFIG_NR_DRAM_BANKS 1
	284	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	285
	286	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	287	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	288	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	289
	290	#define CONFIG_SYS_INIT_SP_OFFSET \
	291	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	292	#define CONFIG_SYS_INIT_SP_ADDR \
	293	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	294
056845c2	295	/* Environment organization */
d67b0d97 EN	296	#define CONFIG_ENV_SIZE (8 * 1024)
d67b0d97 EN	297
f8b1e86d FE	298	#if defined(CONFIG_SABRELITE)
	299	#define CONFIG_ENV_IS_IN_MMC
	300	#else
d67b0d97	301	#define CONFIG_ENV_IS_IN_SPI_FLASH
f8b1e86d	302	#endif
d67b0d97 EN	303
	304	#if defined(CONFIG_ENV_IS_IN_MMC)
	305	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	306	#define CONFIG_SYS_MMC_ENV_DEV 0
	307	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	308	#define CONFIG_ENV_OFFSET (768 * 1024)
	309	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	310	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	311	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	312	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	313	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	314	#endif
	315
d67b0d97 EN	316	#define CONFIG_CMD_BMP
	317
	318	#define CONFIG_CMD_TIME
d3d70e6f	319	#define CONFIG_CMD_MEMTEST
d67b0d97 EN	320	#define CONFIG_SYS_ALT_MEMTEST
d67b0d97 EN	321
147f8fa3 MV	322	/*
	323	* PCI express
	324	*/
147f8fa3 MV	325	#ifdef CONFIG_CMD_PCI
	326	#define CONFIG_PCI
	327	#define CONFIG_PCI_PNP
	328	#define CONFIG_PCI_SCAN_SHOW
	329	#define CONFIG_PCIE_IMX
	330	#endif
	331
84e2dc0c EN	332
	333	#define CONFIG_USB_GADGET
	334	#define CONFIG_CMD_USB_MASS_STORAGE
01acd6ab PK	335	#define CONFIG_USB_FUNCTION_MASS_STORAGE
01acd6ab PK	336	#define CONFIG_USB_GADGET_DOWNLOAD
84e2dc0c EN	337	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	338
	339	/* Netchip IDs */
	340	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	341	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	342	#define CONFIG_G_DNL_MANUFACTURER "Boundary"
	343
17da3c0c	344	#define CONFIG_USB_FUNCTION_FASTBOOT
e9feee63 EN	345	#define CONFIG_CMD_FASTBOOT
e9feee63 EN	346	#define CONFIG_ANDROID_BOOT_IMAGE
a588d99a PK	347	#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
a588d99a PK	348	#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
e9feee63	349
d67b0d97	350	#endif /* __CONFIG_H */