[people/ms/u-boot.git] / include / configs / novena.h

/*
 * Configuration settings for the Novena U-Boot.
 *
 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* System configurations */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MISC_INIT_R
#define CONFIG_KEYBOARD

#include <config_distro_defaults.h>
#include "mx6_common.h"

/* U-Boot Commands */
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_EEPROM
#define CONFIG_FAT_WRITE
#define CONFIG_CMD_MII
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SATA
#define CONFIG_VIDEO

/* U-Boot general configurations */
#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */

/* U-Boot environment */
#define CONFIG_ENV_SIZE			(16 * 1024)
/*
 * Environment is on MMC, starting at offset 512KiB from start of the card.
 * Please place first partition at offset 1MiB from the start of the card
 * as recommended by GNU/fdisk. See below for details:
 * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(512 * 1024)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define CONFIG_ENV_OFFSET_REDUND	\
		(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

/* Booting Linux */
#define CONFIG_BOOTFILE			"fitImage"
#define CONFIG_BOOTARGS			"console=ttymxc1,115200 "
#define CONFIG_BOOTCOMMAND		"run distro_bootcmd ; run net_nfs"
#define CONFIG_HOSTNAME			novena

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE			0xF0000000

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x20000000

#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)

/* SPL */
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_EXT_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#include "imx6_spl.h"			/* common IMX6 SPL configuration */

/* Ethernet Configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0x7
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_ARP_TIMEOUT		200UL
#endif

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_SPD_BUS_NUM		0

/* I2C EEPROM */
#ifdef CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#define CONFIG_SYS_I2C_EEPROM_BUS	2
#endif

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* PCI express */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
#endif

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* SATA Configs */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART2_BASE

/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
/* Gadget part */
#define CONFIG_USBD_HS
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#endif

/* Video output */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK		260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#endif

/* Extra U-Boot environment. */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"fdt_high=0xffffffff\0"						\
	"initrd_high=0xffffffff\0"					\
	"consdev=ttymxc1\0"						\
	"baudrate=115200\0"						\
	"bootdev=/dev/mmcblk0p1\0"					\
	"rootdev=/dev/mmcblk0p2\0"					\
	"netdev=eth0\0"							\
	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0"			\
	"ramdisk_addr_r=0x28000000\0"		   			\
	"fdt_addr_r=0x18000000\0"					\
	"fdtfile=imx6q-novena.dtb\0"					\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addargs=run addcons addmisc\0"					\
	"mmcload="							\
		"mmc rescan ; "						\
		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"mmc_mmc="							\
		"run mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_nfs="							\
		"run mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_mmc="							\
		"run netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs="							\
		"run netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"update_sd_spl_filename=SPL\0"					\
	"update_sd_uboot_filename=u-boot.img\0"				\
	"update_sd_firmware="	/* Update the SD firmware partition */	\
		"if mmc rescan ; then "					\
		"if dhcp ${update_sd_spl_filename} ; then "		\
		"mmc write ${loadaddr} 2 0x200 ; "			\
		"fi ; "							\
		"if dhcp ${update_sd_uboot_filename} ; then "		\
		"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
		"fi ; "							\
		"fi\0"							\
	BOOTENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SATA, sata, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#else
#define CONFIG_EXTRA_ENV_SETTINGS
#endif /* CONFIG_SPL_BUILD */

#endif				/* __CONFIG_H */
Commit	Line	Data
f91c09ac	1	/*
a187559e	2	* Configuration settings for the Novena U-Boot.
f91c09ac MV	3	*
	4	* Copyright (C) 2014 Marek Vasut <marex@denx.de>
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	/* System configurations */
f91c09ac	13	#define CONFIG_BOARD_EARLY_INIT_F
331ae846	14	#define CONFIG_BOARD_LATE_INIT
f91c09ac	15	#define CONFIG_MISC_INIT_R
f91c09ac	16	#define CONFIG_KEYBOARD
f91c09ac	17
1c2d4a50	18	#include <config_distro_defaults.h>
60667a53	19	#include "mx6_common.h"
f91c09ac MV	20
	21	/* U-Boot Commands */
	22	#define CONFIG_CMD_ASKENV
	23	#define CONFIG_CMD_BMODE
f91c09ac	24	#define CONFIG_CMD_EEPROM
6c1751ef	25	#define CONFIG_FAT_WRITE
f91c09ac	26	#define CONFIG_CMD_MII
f91c09ac	27	#define CONFIG_CMD_PCI
f91c09ac	28	#define CONFIG_CMD_SATA
f91c09ac MV	29	#define CONFIG_VIDEO
	30
	31	/* U-Boot general configurations */
f91c09ac	32	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
f91c09ac MV	33
f91c09ac MV	34	/* U-Boot environment */
f91c09ac MV	35	#define CONFIG_ENV_SIZE (16 * 1024)
	36	/*
	37	* Environment is on MMC, starting at offset 512KiB from start of the card.
	38	* Please place first partition at offset 1MiB from the start of the card
	39	* as recommended by GNU/fdisk. See below for details:
	40	* http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
	41	*/
	42	#ifdef CONFIG_CMD_MMC
	43	#define CONFIG_ENV_IS_IN_MMC
	44	#define CONFIG_SYS_MMC_ENV_DEV 0
	45	#define CONFIG_ENV_OFFSET (512 * 1024)
	46	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	47	#define CONFIG_ENV_OFFSET_REDUND \
	48	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	49	#else
	50	#define CONFIG_ENV_IS_NOWHERE
	51	#endif
	52
	53	/* Booting Linux */
f91c09ac MV	54	#define CONFIG_BOOTFILE "fitImage"
f91c09ac MV	55	#define CONFIG_BOOTARGS "console=ttymxc1,115200 "
1c2d4a50	56	#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
f91c09ac MV	57	#define CONFIG_HOSTNAME novena
	58
	59	/* Physical Memory Map */
	60	#define CONFIG_NR_DRAM_BANKS 1
	61	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	62	#define PHYS_SDRAM_SIZE 0xF0000000
	63
	64	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	65	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	66	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	67
	68	#define CONFIG_SYS_INIT_SP_OFFSET \
	69	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	70	#define CONFIG_SYS_INIT_SP_ADDR \
	71	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	72
	73	#define CONFIG_SYS_MEMTEST_START 0x10000000
	74	#define CONFIG_SYS_MEMTEST_END 0x20000000
	75
	76	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
	77
	78	/* SPL */
	79	#define CONFIG_SPL_FAT_SUPPORT
a80a999c	80	#define CONFIG_SPL_EXT_SUPPORT
f91c09ac MV	81	#define CONFIG_SPL_MMC_SUPPORT
	82	#include "imx6_spl.h" /* common IMX6 SPL configuration */
	83
f91c09ac MV	84	/* Ethernet Configuration */
	85	#ifdef CONFIG_CMD_NET
	86	#define CONFIG_FEC_MXC
	87	#define CONFIG_MII
	88	#define IMX_FEC_BASE ENET_BASE_ADDR
	89	#define CONFIG_FEC_XCV_TYPE RGMII
	90	#define CONFIG_ETHPRIME "FEC"
	91	#define CONFIG_FEC_MXC_PHYADDR 0x7
	92	#define CONFIG_PHYLIB
	93	#define CONFIG_PHY_MICREL
	94	#define CONFIG_PHY_MICREL_KSZ9021
	95	#define CONFIG_ARP_TIMEOUT 200UL
	96	#endif
	97
	98	/* I2C */
	99	#define CONFIG_SYS_I2C
	100	#define CONFIG_SYS_I2C_MXC
03544c66 AA	101	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	102	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	103	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
f91c09ac MV	104	#define CONFIG_I2C_MULTI_BUS
	105	#define CONFIG_I2C_MXC
	106	#define CONFIG_SYS_I2C_SPEED 100000
735b1a2e	107	#define CONFIG_SYS_SPD_BUS_NUM 0
f91c09ac MV	108
	109	/* I2C EEPROM */
	110	#ifdef CONFIG_CMD_EEPROM
	111	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
735b1a2e	112	#define CONFIG_SYS_I2C_EEPROM_BUS 2
f91c09ac MV	113	#endif
	114
	115	/* MMC Configs */
f91c09ac MV	116	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
f91c09ac MV	117	#define CONFIG_SYS_FSL_USDHC_NUM 2
f91c09ac	118
f91c09ac MV	119	/* PCI express */
	120	#ifdef CONFIG_CMD_PCI
	121	#define CONFIG_PCI
	122	#define CONFIG_PCI_PNP
	123	#define CONFIG_PCI_SCAN_SHOW
	124	#define CONFIG_PCIE_IMX
	125	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
	126	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
	127	#endif
	128
	129	/* PMIC */
	130	#define CONFIG_POWER
	131	#define CONFIG_POWER_I2C
	132	#define CONFIG_POWER_PFUZE100
	133	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	134
	135	/* SATA Configs */
	136	#ifdef CONFIG_CMD_SATA
	137	#define CONFIG_DWC_AHSATA
	138	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	139	#define CONFIG_DWC_AHSATA_PORT_ID 0
	140	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	141	#define CONFIG_LBA48
	142	#define CONFIG_LIBATA
	143	#endif
	144
	145	/* UART */
	146	#define CONFIG_MXC_UART
	147	#define CONFIG_MXC_UART_BASE UART2_BASE
f91c09ac MV	148
	149	/* USB Configs */
	150	#ifdef CONFIG_CMD_USB
	151	#define CONFIG_USB_EHCI
	152	#define CONFIG_USB_EHCI_MX6
	153	#define CONFIG_USB_STORAGE
	154	#define CONFIG_USB_KEYBOARD
	155	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	156	#define CONFIG_USB_HOST_ETHER
	157	#define CONFIG_USB_ETHER_ASIX
	158	#define CONFIG_USB_ETHER_SMSC95XX
	159	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	160	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	161	#define CONFIG_MXC_USB_FLAGS 0
	162	/* Gadget part */
f91c09ac	163	#define CONFIG_USBD_HS
f91c09ac MV	164	#define CONFIG_USB_ETHER
	165	#define CONFIG_USB_ETH_CDC
	166	#define CONFIG_NETCONSOLE
	167	#endif
	168
	169	/* Video output */
	170	#ifdef CONFIG_VIDEO
f91c09ac MV	171	#define CONFIG_VIDEO_IPUV3
	172	#define CONFIG_CFB_CONSOLE
	173	#define CONFIG_VGA_AS_SINGLE_DEVICE
	174	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	175	#define CONFIG_VIDEO_BMP_RLE8
	176	#define CONFIG_SPLASH_SCREEN
	177	#define CONFIG_BMP_16BPP
	178	#define CONFIG_VIDEO_LOGO
	179	#define CONFIG_IPUV3_CLK 260000000
	180	#define CONFIG_CMD_HDMIDETECT
	181	#define CONFIG_CONSOLE_MUX
	182	#define CONFIG_IMX_HDMI
	183	#define CONFIG_IMX_VIDEO_SKIP
	184	#endif
	185
	186	/* Extra U-Boot environment. */
1c2d4a50	187	#ifndef CONFIG_SPL_BUILD
f91c09ac MV	188	#define CONFIG_EXTRA_ENV_SETTINGS \
	189	"fdt_high=0xffffffff\0" \
	190	"initrd_high=0xffffffff\0" \
	191	"consdev=ttymxc1\0" \
	192	"baudrate=115200\0" \
	193	"bootdev=/dev/mmcblk0p1\0" \
	194	"rootdev=/dev/mmcblk0p2\0" \
	195	"netdev=eth0\0" \
233509a5	196	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
1c2d4a50 VC	197	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
	198	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
	199	"ramdisk_addr_r=0x28000000\0" \
	200	"fdt_addr_r=0x18000000\0" \
	201	"fdtfile=imx6q-novena.dtb\0" \
f91c09ac MV	202	"addcons=" \
	203	"setenv bootargs ${bootargs} " \
	204	"console=${consdev},${baudrate}\0" \
	205	"addip=" \
	206	"setenv bootargs ${bootargs} " \
	207	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	208	"${netmask}:${hostname}:${netdev}:off\0" \
	209	"addmisc=" \
	210	"setenv bootargs ${bootargs} ${miscargs}\0" \
	211	"addargs=run addcons addmisc\0" \
	212	"mmcload=" \
	213	"mmc rescan ; " \
	214	"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
	215	"netload=" \
	216	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	217	"miscargs=nohlt panic=1\0" \
	218	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	219	"nfsargs=" \
	220	"setenv bootargs root=/dev/nfs rw " \
	221	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	222	"mmc_mmc=" \
	223	"run mmcload mmcargs addargs ; " \
	224	"bootm ${kernel_addr_r}\0" \
	225	"mmc_nfs=" \
	226	"run mmcload nfsargs addip addargs ; " \
	227	"bootm ${kernel_addr_r}\0" \
	228	"net_mmc=" \
	229	"run netload mmcargs addargs ; " \
	230	"bootm ${kernel_addr_r}\0" \
	231	"net_nfs=" \
	232	"run netload nfsargs addip addargs ; " \
	233	"bootm ${kernel_addr_r}\0" \
	234	"update_sd_spl_filename=SPL\0" \
	235	"update_sd_uboot_filename=u-boot.img\0" \
	236	"update_sd_firmware=" /* Update the SD firmware partition */ \
	237	"if mmc rescan ; then " \
	238	"if dhcp ${update_sd_spl_filename} ; then " \
	239	"mmc write ${loadaddr} 2 0x200 ; " \
	240	"fi ; " \
	241	"if dhcp ${update_sd_uboot_filename} ; then " \
	242	"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
	243	"fi ; " \
	244	"fi\0" \
1c2d4a50 VC	245	BOOTENV
	246
	247	#define BOOT_TARGET_DEVICES(func) \
	248	func(MMC, mmc, 0) \
	249	func(USB, usb, 0) \
	250	func(SATA, sata, 0) \
	251	func(PXE, pxe, na) \
	252	func(DHCP, dhcp, na)
	253
	254	#include <config_distro_bootcmd.h>
	255
	256	#else
	257	#define CONFIG_EXTRA_ENV_SETTINGS
	258	#endif /* CONFIG_SPL_BUILD */
f91c09ac MV	259
f91c09ac MV	260	#endif /* __CONFIG_H */