[people/ms/u-boot.git] / include / configs / novena.h

/*
 * Configuration settings for the Novena U-Boot.
 *
 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* System configurations */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MISC_INIT_R
#define CONFIG_KEYBOARD

#include <config_distro_defaults.h>
#include "mx6_common.h"

/* U-Boot Commands */
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_EEPROM
#define CONFIG_FAT_WRITE
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SATA

/* U-Boot general configurations */

/* U-Boot environment */
#define CONFIG_ENV_SIZE			(16 * 1024)
/*
 * Environment is on MMC, starting at offset 512KiB from start of the card.
 * Please place first partition at offset 1MiB from the start of the card
 * as recommended by GNU/fdisk. See below for details:
 * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(512 * 1024)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define CONFIG_ENV_OFFSET_REDUND	\
		(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

/* Booting Linux */
#define CONFIG_BOOTFILE			"fitImage"
#define CONFIG_BOOTARGS			"console=ttymxc1,115200 "
#define CONFIG_BOOTCOMMAND		"run distro_bootcmd ; run net_nfs"
#define CONFIG_HOSTNAME			novena

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x20000000

#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)

/* SPL */
#include "imx6_spl.h"			/* common IMX6 SPL configuration */

/* Ethernet Configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0x7
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_ARP_TIMEOUT		200UL
#endif

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_SPD_BUS_NUM		0

/* I2C EEPROM */
#ifdef CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#define CONFIG_SYS_I2C_EEPROM_BUS	2
#endif

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* PCI express */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
#endif

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* SATA Configs */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART2_BASE

/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
/* Gadget part */
#define CONFIG_USBD_HS
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#endif

/* Video output */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK		260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#endif

/* Extra U-Boot environment. */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"fdt_high=0xffffffff\0"						\
	"initrd_high=0xffffffff\0"					\
	"consdev=ttymxc1\0"						\
	"baudrate=115200\0"						\
	"bootdev=/dev/mmcblk0p1\0"					\
	"rootdev=/dev/mmcblk0p2\0"					\
	"netdev=eth0\0"							\
	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0"			\
	"ramdisk_addr_r=0x28000000\0"		   			\
	"fdt_addr_r=0x18000000\0"					\
	"fdtfile=imx6q-novena.dtb\0"					\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addargs=run addcons addmisc\0"					\
	"mmcload="							\
		"mmc rescan ; "						\
		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"mmc_mmc="							\
		"run mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_nfs="							\
		"run mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_mmc="							\
		"run netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs="							\
		"run netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"update_sd_spl_filename=SPL\0"					\
	"update_sd_uboot_filename=u-boot.img\0"				\
	"update_sd_firmware="	/* Update the SD firmware partition */	\
		"if mmc rescan ; then "					\
		"if dhcp ${update_sd_spl_filename} ; then "		\
		"mmc write ${loadaddr} 2 0x200 ; "			\
		"fi ; "							\
		"if dhcp ${update_sd_uboot_filename} ; then "		\
		"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
		"fi ; "							\
		"fi\0"							\
	BOOTENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SATA, sata, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#else
#define CONFIG_EXTRA_ENV_SETTINGS
#endif /* CONFIG_SPL_BUILD */

#endif				/* __CONFIG_H */
Commit	Line	Data
f91c09ac	1	/*
a187559e	2	* Configuration settings for the Novena U-Boot.
f91c09ac MV	3	*
	4	* Copyright (C) 2014 Marek Vasut <marex@denx.de>
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	/* System configurations */
f91c09ac	13	#define CONFIG_BOARD_EARLY_INIT_F
331ae846	14	#define CONFIG_BOARD_LATE_INIT
f91c09ac	15	#define CONFIG_MISC_INIT_R
f91c09ac	16	#define CONFIG_KEYBOARD
f91c09ac	17
1c2d4a50	18	#include <config_distro_defaults.h>
60667a53	19	#include "mx6_common.h"
f91c09ac MV	20
f91c09ac MV	21	/* U-Boot Commands */
f91c09ac	22	#define CONFIG_CMD_BMODE
f91c09ac	23	#define CONFIG_CMD_EEPROM
6c1751ef	24	#define CONFIG_FAT_WRITE
f91c09ac	25	#define CONFIG_CMD_PCI
f91c09ac	26	#define CONFIG_CMD_SATA
f91c09ac MV	27
f91c09ac MV	28	/* U-Boot general configurations */
f91c09ac MV	29
f91c09ac MV	30	/* U-Boot environment */
f91c09ac MV	31	#define CONFIG_ENV_SIZE (16 * 1024)
	32	/*
	33	* Environment is on MMC, starting at offset 512KiB from start of the card.
	34	* Please place first partition at offset 1MiB from the start of the card
	35	* as recommended by GNU/fdisk. See below for details:
	36	* http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
	37	*/
	38	#ifdef CONFIG_CMD_MMC
	39	#define CONFIG_ENV_IS_IN_MMC
	40	#define CONFIG_SYS_MMC_ENV_DEV 0
	41	#define CONFIG_ENV_OFFSET (512 * 1024)
	42	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	43	#define CONFIG_ENV_OFFSET_REDUND \
	44	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	45	#else
	46	#define CONFIG_ENV_IS_NOWHERE
	47	#endif
	48
	49	/* Booting Linux */
f91c09ac MV	50	#define CONFIG_BOOTFILE "fitImage"
f91c09ac MV	51	#define CONFIG_BOOTARGS "console=ttymxc1,115200 "
1c2d4a50	52	#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
f91c09ac MV	53	#define CONFIG_HOSTNAME novena
	54
	55	/* Physical Memory Map */
	56	#define CONFIG_NR_DRAM_BANKS 1
	57	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
f91c09ac MV	58
	59	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	60	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	61	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	62
	63	#define CONFIG_SYS_INIT_SP_OFFSET \
	64	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	65	#define CONFIG_SYS_INIT_SP_ADDR \
	66	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	67
	68	#define CONFIG_SYS_MEMTEST_START 0x10000000
	69	#define CONFIG_SYS_MEMTEST_END 0x20000000
	70
	71	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
	72
	73	/* SPL */
f91c09ac MV	74	#include "imx6_spl.h" /* common IMX6 SPL configuration */
f91c09ac MV	75
f91c09ac MV	76	/* Ethernet Configuration */
	77	#ifdef CONFIG_CMD_NET
	78	#define CONFIG_FEC_MXC
	79	#define CONFIG_MII
	80	#define IMX_FEC_BASE ENET_BASE_ADDR
	81	#define CONFIG_FEC_XCV_TYPE RGMII
	82	#define CONFIG_ETHPRIME "FEC"
	83	#define CONFIG_FEC_MXC_PHYADDR 0x7
	84	#define CONFIG_PHYLIB
	85	#define CONFIG_PHY_MICREL
	86	#define CONFIG_PHY_MICREL_KSZ9021
	87	#define CONFIG_ARP_TIMEOUT 200UL
	88	#endif
	89
	90	/* I2C */
	91	#define CONFIG_SYS_I2C
	92	#define CONFIG_SYS_I2C_MXC
03544c66 AA	93	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	94	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	95	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
f91c09ac MV	96	#define CONFIG_I2C_MULTI_BUS
	97	#define CONFIG_I2C_MXC
	98	#define CONFIG_SYS_I2C_SPEED 100000
735b1a2e	99	#define CONFIG_SYS_SPD_BUS_NUM 0
f91c09ac MV	100
	101	/* I2C EEPROM */
	102	#ifdef CONFIG_CMD_EEPROM
	103	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
735b1a2e	104	#define CONFIG_SYS_I2C_EEPROM_BUS 2
f91c09ac MV	105	#endif
	106
	107	/* MMC Configs */
f91c09ac MV	108	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
f91c09ac MV	109	#define CONFIG_SYS_FSL_USDHC_NUM 2
f91c09ac	110
f91c09ac MV	111	/* PCI express */
f91c09ac MV	112	#ifdef CONFIG_CMD_PCI
f91c09ac MV	113	#define CONFIG_PCI_PNP
	114	#define CONFIG_PCI_SCAN_SHOW
	115	#define CONFIG_PCIE_IMX
	116	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
	117	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
	118	#endif
	119
	120	/* PMIC */
	121	#define CONFIG_POWER
	122	#define CONFIG_POWER_I2C
	123	#define CONFIG_POWER_PFUZE100
	124	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	125
	126	/* SATA Configs */
	127	#ifdef CONFIG_CMD_SATA
	128	#define CONFIG_DWC_AHSATA
	129	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	130	#define CONFIG_DWC_AHSATA_PORT_ID 0
	131	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	132	#define CONFIG_LBA48
	133	#define CONFIG_LIBATA
	134	#endif
	135
	136	/* UART */
	137	#define CONFIG_MXC_UART
	138	#define CONFIG_MXC_UART_BASE UART2_BASE
f91c09ac MV	139
	140	/* USB Configs */
	141	#ifdef CONFIG_CMD_USB
	142	#define CONFIG_USB_EHCI
	143	#define CONFIG_USB_EHCI_MX6
f91c09ac MV	144	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	145	#define CONFIG_USB_HOST_ETHER
	146	#define CONFIG_USB_ETHER_ASIX
	147	#define CONFIG_USB_ETHER_SMSC95XX
	148	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	149	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	150	#define CONFIG_MXC_USB_FLAGS 0
	151	/* Gadget part */
f91c09ac	152	#define CONFIG_USBD_HS
f91c09ac MV	153	#define CONFIG_USB_ETHER
	154	#define CONFIG_USB_ETH_CDC
	155	#define CONFIG_NETCONSOLE
	156	#endif
	157
	158	/* Video output */
	159	#ifdef CONFIG_VIDEO
f91c09ac	160	#define CONFIG_VIDEO_IPUV3
f91c09ac MV	161	#define CONFIG_VIDEO_BMP_RLE8
	162	#define CONFIG_SPLASH_SCREEN
	163	#define CONFIG_BMP_16BPP
	164	#define CONFIG_VIDEO_LOGO
	165	#define CONFIG_IPUV3_CLK 260000000
	166	#define CONFIG_CMD_HDMIDETECT
f91c09ac MV	167	#define CONFIG_IMX_HDMI
	168	#define CONFIG_IMX_VIDEO_SKIP
	169	#endif
	170
	171	/* Extra U-Boot environment. */
1c2d4a50	172	#ifndef CONFIG_SPL_BUILD
f91c09ac MV	173	#define CONFIG_EXTRA_ENV_SETTINGS \
	174	"fdt_high=0xffffffff\0" \
	175	"initrd_high=0xffffffff\0" \
	176	"consdev=ttymxc1\0" \
	177	"baudrate=115200\0" \
	178	"bootdev=/dev/mmcblk0p1\0" \
	179	"rootdev=/dev/mmcblk0p2\0" \
	180	"netdev=eth0\0" \
233509a5	181	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
1c2d4a50 VC	182	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
	183	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
	184	"ramdisk_addr_r=0x28000000\0" \
	185	"fdt_addr_r=0x18000000\0" \
	186	"fdtfile=imx6q-novena.dtb\0" \
f91c09ac MV	187	"addcons=" \
	188	"setenv bootargs ${bootargs} " \
	189	"console=${consdev},${baudrate}\0" \
	190	"addip=" \
	191	"setenv bootargs ${bootargs} " \
	192	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	193	"${netmask}:${hostname}:${netdev}:off\0" \
	194	"addmisc=" \
	195	"setenv bootargs ${bootargs} ${miscargs}\0" \
	196	"addargs=run addcons addmisc\0" \
	197	"mmcload=" \
	198	"mmc rescan ; " \
	199	"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
	200	"netload=" \
	201	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	202	"miscargs=nohlt panic=1\0" \
	203	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	204	"nfsargs=" \
	205	"setenv bootargs root=/dev/nfs rw " \
	206	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	207	"mmc_mmc=" \
	208	"run mmcload mmcargs addargs ; " \
	209	"bootm ${kernel_addr_r}\0" \
	210	"mmc_nfs=" \
	211	"run mmcload nfsargs addip addargs ; " \
	212	"bootm ${kernel_addr_r}\0" \
	213	"net_mmc=" \
	214	"run netload mmcargs addargs ; " \
	215	"bootm ${kernel_addr_r}\0" \
	216	"net_nfs=" \
	217	"run netload nfsargs addip addargs ; " \
	218	"bootm ${kernel_addr_r}\0" \
	219	"update_sd_spl_filename=SPL\0" \
	220	"update_sd_uboot_filename=u-boot.img\0" \
	221	"update_sd_firmware=" /* Update the SD firmware partition */ \
	222	"if mmc rescan ; then " \
	223	"if dhcp ${update_sd_spl_filename} ; then " \
	224	"mmc write ${loadaddr} 2 0x200 ; " \
	225	"fi ; " \
	226	"if dhcp ${update_sd_uboot_filename} ; then " \
	227	"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
	228	"fi ; " \
	229	"fi\0" \
1c2d4a50 VC	230	BOOTENV
	231
	232	#define BOOT_TARGET_DEVICES(func) \
	233	func(MMC, mmc, 0) \
	234	func(USB, usb, 0) \
	235	func(SATA, sata, 0) \
	236	func(PXE, pxe, na) \
	237	func(DHCP, dhcp, na)
	238
	239	#include <config_distro_bootcmd.h>
	240
	241	#else
	242	#define CONFIG_EXTRA_ENV_SETTINGS
	243	#endif /* CONFIG_SPL_BUILD */
f91c09ac MV	244
f91c09ac MV	245	#endif /* __CONFIG_H */