[people/ms/u-boot.git] / include / configs / o2d300.h

/*
 * (C) Copyright 2012
 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * Valid values for CONFIG_SYS_TEXT_BASE are:
 * 0xFC000000   boot low boot high (standard configuration)
 * 0x00100000   boot from RAM (for testing only)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xfc000000	/* Standard: boot low */
#endif

/* Board specific flash config */
#define CONFIG_SYS_FLASH_BASE		0xfc000000
#define CONFIG_SYS_FLASH_SIZE		0x04000000      /* maximum 64MB */
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT	512

/*
 * Include common defines for all ifm boards
 */
#include "o2dnt-common.h"

/*
 * GPIO configuration:
 * CS1 SDRAM activate + no CAN + no PCI
 */
#define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004

/* Other board specific configs */
#define CONFIG_SYS_BOOTCS_CFG		0x00057d01
#define CONFIG_SYS_RESET_ADDRESS	0xfc000000

#define CONFIG_SYS_MEMTEST_START	0x00100000      /* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x07f00000	/* 1 - 127 MB in DRAM */

/* Use redundant environment */
#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)

#define CONFIG_BOARD_NAME		"o2d300"
#define CONFIG_BOARD_BOOTCMD		"run dhcp_boot"
#define CONFIG_BOARD_MEM_LIMIT		__stringify(126)
#define BOARD_POST_CRC32_END		__stringify(0x02000000)

#define CONFIG_EXTRA_ENV_SETTINGS					\
	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
	CONFIG_IFM_DEFAULT_ENV_OLD					\
	CONFIG_IFM_DEFAULT_ENV_NEW					\
	"autoload=no\0"							\
	"dhcp_boot=run dhcpcmd;run flash_mtd\0"				\
	"flash_mtd=run mtd_args addip addmem;"				\
		"bootm ${kernel_addr}\0"				\
	"mtd_args=setenv bootargs root=/dev/mtdblock4 "			\
		"rw rootfstype=cramfs\0"				\
	"linbot=fc080000\0"						\
	"lintop=fc17ffff\0"						\
	"rambot=fc180000\0"						\
	"ramtop=fc57ffff\0"						\
	"jffbot=fc580000\0"						\
	"jfftop=fd39ffff\0"						\
	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
	"ubotop=fc03ffff\0"						\
	"halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"	\
	"halbot=fd3a0000\0"						\
	"haltop=fdf9ffff\0"						\
	"progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};"	\
		"cp.b ${fileaddr} ${halbot} ${filesize}\0"		\
	"kernel_addr=0xfc060000\0"					\
	"ramdisk_addr=0xfc160000\0"					\
	"master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"		\
		"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"		\
	"netretry=once\0"						\
	"protcmd=protect on ${linbot} ${lintop};"			\
		"protect on ${rambot} ${ramtop}\0"			\
	"o2derror=def_env\0"						\
	"sensorType=O2D300AA\0"
Commit	Line	Data
4387cf1a AG	1	/*
	2	* (C) Copyright 2012
	3	* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
4387cf1a AG	6	*/
	7
	8	/*
	9	* Valid values for CONFIG_SYS_TEXT_BASE are:
	10	* 0xFC000000 boot low boot high (standard configuration)
	11	* 0x00100000 boot from RAM (for testing only)
	12	*/
	13	#ifndef CONFIG_SYS_TEXT_BASE
	14	#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
	15	#endif
	16
	17	/* Board specific flash config */
	18	#define CONFIG_SYS_FLASH_BASE 0xfc000000
	19	#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
	20	/* max number of sectors on one chip */
	21	#define CONFIG_SYS_MAX_FLASH_SECT 512
	22
	23	/*
	24	* Include common defines for all ifm boards
	25	*/
	26	#include "o2dnt-common.h"
	27
	28	/*
	29	* GPIO configuration:
	30	* CS1 SDRAM activate + no CAN + no PCI
	31	*/
	32	#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004
	33
	34	/* Other board specific configs */
	35	#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
	36	#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
	37
	38	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	39	#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */
	40
	41	/* Use redundant environment */
	42	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
	43	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	44
	45	#define CONFIG_BOARD_NAME "o2d300"
	46	#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
4a8c3f69 AG	47	#define CONFIG_BOARD_MEM_LIMIT __stringify(126)
4a8c3f69 AG	48	#define BOARD_POST_CRC32_END __stringify(0x02000000)
4387cf1a AG	49
	50	#define CONFIG_EXTRA_ENV_SETTINGS \
	51	CONFIG_IFM_DEFAULT_ENV_SETTINGS \
	52	CONFIG_IFM_DEFAULT_ENV_OLD \
	53	CONFIG_IFM_DEFAULT_ENV_NEW \
	54	"autoload=no\0" \
	55	"dhcp_boot=run dhcpcmd;run flash_mtd\0" \
	56	"flash_mtd=run mtd_args addip addmem;" \
	57	"bootm ${kernel_addr}\0" \
	58	"mtd_args=setenv bootargs root=/dev/mtdblock4 " \
	59	"rw rootfstype=cramfs\0" \
	60	"linbot=fc080000\0" \
	61	"lintop=fc17ffff\0" \
	62	"rambot=fc180000\0" \
	63	"ramtop=fc57ffff\0" \
	64	"jffbot=fc580000\0" \
	65	"jfftop=fd39ffff\0" \
4a8c3f69	66	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
4387cf1a AG	67	"ubotop=fc03ffff\0" \
	68	"halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \
	69	"halbot=fd3a0000\0" \
	70	"haltop=fdf9ffff\0" \
	71	"progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \
	72	"cp.b ${fileaddr} ${halbot} ${filesize}\0" \
	73	"kernel_addr=0xfc060000\0" \
	74	"ramdisk_addr=0xfc160000\0" \
	75	"master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \
	76	"mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \
	77	"netretry=once\0" \
	78	"protcmd=protect on ${linbot} ${lintop};" \
	79	"protect on ${rambot} ${ramtop}\0" \
	80	"o2derror=def_env\0" \
	81	"sensorType=O2D300AA\0"