[people/ms/u-boot.git] / include / configs / o2dnt-common.h

/*
 *  Common configuration options for ifm camera boards
 *
 * (C) Copyright 2005
 * Sebastien Cazaux, ifm electronic gmbh
 *
 * (C) Copyright 2012
 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __O2D_CONFIG_H
#define __O2D_CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_MPC5200
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* running at 33.000000MHz */

#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
/* log base 2 of the above value */
#define CONFIG_SYS_CACHELINE_SHIFT	5
#endif

/*
#define CONFIG_POST	(CONFIG_SYS_POST_MEMORY | \
			 CONFIG_SYS_POST_I2C)
*/

#ifdef CONFIG_POST
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE	(MPC5XXX_SRAM_SIZE - 4)
#endif

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	5	/* console is on PSC5 */
#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/*
 * PCI Mapping:
 * 0x40000000 - 0x4fffffff - PCI Memory
 * 0x50000000 - 0x50ffffff - PCI IO Space
 */
#undef CONFIG_PCI
#define CONFIG_PCI_PNP		1

#define CONFIG_PCI_MEM_BUS	0x40000000
#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE	0x10000000

#define CONFIG_PCI_IO_BUS	0x50000000
#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE	0x01000000

#define CONFIG_SYS_XLB_PIPELINING	1

/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION

#define CONFIG_TIMESTAMP	/* Print image info with timestamp */

#define CONFIG_SYS_ALT_MEMTEST	/* Much more complex memory test */

/*
 * Supported commands
 */
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#ifdef CONFIG_PCI
#define CONFIG_CMD_PCI
#endif
#ifdef CONFIG_POST
#define CONFIG_CMD_DIAG
#endif

#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000)
/* Boot low with 16 or 32 MB Flash */
#define CONFIG_SYS_LOWBOOT	1
#elif (CONFIG_SYS_TEXT_BASE != 0x00100000)
#error "CONFIG_SYS_TEXT_BASE value is invalid"
#endif

#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */

#define CONFIG_PREBOOT	"run master"

#undef	CONFIG_BOOTARGS

#if !defined(CONFIG_CONSOLE_DEV)
#define CONFIG_CONSOLE_DEV	"ttyPSC1"
#endif

/*
 * Default environment for booting old and new kernel versions
 */
#define CONFIG_IFM_DEFAULT_ENV_OLD					\
	"flash_self_old=run ramargs addip addmem;"			\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs_old=run nfsargs addip addmem;"			\
		"bootm ${kernel_addr}\0"				\
	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
		"run nfsargs addip addmem;"				\
		"bootm ${kernel_addr_r}\0"

#define CONFIG_IFM_DEFAULT_ENV_NEW					\
	"fdt_addr_r=900000\0"						\
	"fdt_file="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME".dtb\0"	\
	"flash_self=run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
	"flash_nfs=run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"tftp ${fdt_addr_r} ${fdt_file}; "			\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\

#define	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
	"IOpin=0x64\0"							\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addmem=setenv bootargs ${bootargs} ${memlimit}\0"		\
	"addmisc=sete bootargs ${bootargs} ${miscargs}\0"		\
	"addtty=sete bootargs ${bootargs} console="			\
		CONFIG_CONSOLE_DEV ",${baudrate}\0"			\
	"bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"	\
	"kernel_addr_r=600000\0"					\
	"initrd_high=0x03e00000\0"					\
	"memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0"			\
	"memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"linuxname="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"\
	"progLinux=tftp 200000 ${linuxname};erase ${linbot} ${lintop};" \
		"cp.b ${fileaddr} ${linbot} ${filesize}\0"		\
	"ramname="CONFIG_BOARD_NAME"/uRamdisk_"CONFIG_BOARD_NAME"_act\0"\
	"progRam=tftp 200000 ${ramname};erase ${rambot} ${ramtop};"	\
		"cp.b ${fileaddr} ${rambot} ${filesize}\0"		\
	"jffname="CONFIG_BOARD_NAME"/uJFFS2_"CONFIG_BOARD_NAME"_act\0"	\
	"progJff=tftp 200000 ${jffname};erase ${jffbot} ${jfftop};"	\
		"cp.b ${fileaddr} ${jffbot} ${filesize}\0"		\
	"rootpath=/opt/eldk/ppc_6xx\0"					\
	"uboname=" CONFIG_BOARD_NAME					\
		"/u-boot.bin_" CONFIG_BOARD_NAME "_act\0"		\
	"progubo=tftp 200000 ${uboname};"				\
		"protect off ${ubobot} ${ubotop};"			\
		"erase ${ubobot} ${ubotop};"				\
		"cp.b ${fileaddr} ${ubobot} ${filesize}\0"		\
	"unlock=yes\0"							\
	"post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;"	\
		"setenv bootdelay 1;"					\
		"crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" "		\
			BOARD_POST_CRC32_END";"				\
		"setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0"

#define CONFIG_BOOTCOMMAND	"run post"

/*
 * IPB Bus clocking configuration.
 */
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */

#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
/*
 * PCI Bus clocking configuration
 *
 * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
 * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
 * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
 */
#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
#endif

/*
 * I2C configuration
 */
#define CONFIG_HARD_I2C			1	/* I2C with hardware support */
#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
#define CONFIG_SYS_I2C_SLAVE		0x7F

/*
 * EEPROM configuration:
 *
 * O2DNT board is equiped with Ramtron FRAM device FM24CL16
 * 16 Kib Ferroelectric Nonvolatile serial RAM memory
 * organized as 2048 x 8 bits and addressable as eight I2C devices
 * 0x50 ... 0x57 each 256 bytes in size
 *
 */
#define CONFIG_SYS_I2C_FRAM
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
/*
 * There is no write delay with FRAM, write operations are performed at bus
 * speed. Thus, no status polling or write delay is needed.
 */

/*
 * Flash configuration
 */
#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_FLASH_16BIT
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_CFI_AMD_RESET
#define CONFIG_SYS_FLASH_EMPTY_INFO

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Erase Timeout (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Write Timeout (in ms) */
/* Timeout for Flash Clear Lock Bits (in ms) */
#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000
/* "Real" (hardware) sectors protection */
#define CONFIG_SYS_FLASH_PROTECTION

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_SIZE		0x20000
#define CONFIG_ENV_SECT_SIZE	0x20000
#define CONFIG_ENV_OVERWRITE	1
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)

/*
 * Memory map
 */
#define CONFIG_SYS_MBAR		0xF0000000
#define CONFIG_SYS_SDRAM_BASE	0x00000000
#define CONFIG_SYS_DEFAULT_MBAR	0x80000000

/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
#ifdef CONFIG_POST
/* preserve space for the post_word at end of on-chip SRAM */
#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_POST_SIZE
#else
/* End of used area in DPRAM */
#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
#endif

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(192 << 10) /* 192 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* 128 kB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial map for Linux */

#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT		1
#endif

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC
#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR			0x00
#define CONFIG_RESET_PHY_R

/*
 * GPIO configuration
 */
#define CONFIG_SYS_GPIO_DATADIR		0x00000064 /* PSC1_2, PSC2_1,2 output */
#define CONFIG_SYS_GPIO_OPENDRAIN	0x00000000 /* No open drain */
#define CONFIG_SYS_GPIO_DATAVALUE	0x00000000 /* PSC1_1 to 1, rest to 0 */
#define CONFIG_SYS_GPIO_ENABLE		0x00000064 /* PSC1_2, PSC2_1,2 enable */

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
#define CONFIG_CMDLINE_EDITING

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
#endif
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					 sizeof(CONFIG_SYS_PROMPT) + 16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS		16
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/* default load address */
#define CONFIG_SYS_LOAD_ADDR		0x100000

/* decrementer freq: 1 ms ticks */

/*
 * Various low-level settings
 */
#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE

#define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE

#define CONFIG_BOARD_EARLY_INIT_R

#define CONFIG_SYS_CS_BURST		0x00000000
#define CONFIG_SYS_CS_DEADCYCLE		0x33333333

/*
 * DT support
 */
#define OF_CPU			"PowerPC,5200@0"
#define OF_SOC			"soc5200@f0000000"
#define OF_TBCLK		(bd->bi_busfreq / 4)

#endif /* __O2D_CONFIG_H */
Commit	Line	Data
4387cf1a AG	1	/*
	2	* Common configuration options for ifm camera boards
	3	*
	4	* (C) Copyright 2005
	5	* Sebastien Cazaux, ifm electronic gmbh
	6	*
	7	* (C) Copyright 2012
	8	* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
	9	*
3765b3e7	10	* SPDX-License-Identifier: GPL-2.0+
4387cf1a AG	11	*/
	12
	13	#ifndef __O2D_CONFIG_H
	14	#define __O2D_CONFIG_H
	15
	16	/*
	17	* High Level Configuration Options
	18	*/
4387cf1a	19	#define CONFIG_MPC5200
8086988f	20	#define CONFIG_DISPLAY_BOARDINFO
4387cf1a AG	21
	22	#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */
	23
	24	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
	25	#if defined(CONFIG_CMD_KGDB)
	26	/* log base 2 of the above value */
	27	#define CONFIG_SYS_CACHELINE_SHIFT 5
	28	#endif
	29
	30	/*
	31	#define CONFIG_POST (CONFIG_SYS_POST_MEMORY \| \
	32	CONFIG_SYS_POST_I2C)
	33	*/
	34
	35	#ifdef CONFIG_POST
	36	/* preserve space for the post_word at end of on-chip SRAM */
	37	#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
	38	#endif
	39
	40	/*
	41	* Serial console configuration
	42	*/
	43	#define CONFIG_PSC_CONSOLE 5 /* console is on PSC5 */
	44	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	45	#define CONFIG_SYS_BAUDRATE_TABLE \
	46	{ 9600, 19200, 38400, 57600, 115200, 230400 }
	47
	48	/*
	49	* PCI Mapping:
	50	* 0x40000000 - 0x4fffffff - PCI Memory
	51	* 0x50000000 - 0x50ffffff - PCI IO Space
	52	*/
	53	#undef CONFIG_PCI
	54	#define CONFIG_PCI_PNP 1
	55
	56	#define CONFIG_PCI_MEM_BUS 0x40000000
	57	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	58	#define CONFIG_PCI_MEM_SIZE 0x10000000
	59
	60	#define CONFIG_PCI_IO_BUS 0x50000000
	61	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	62	#define CONFIG_PCI_IO_SIZE 0x01000000
	63
	64	#define CONFIG_SYS_XLB_PIPELINING 1
	65
	66	/* Partitions */
	67	#define CONFIG_MAC_PARTITION
	68	#define CONFIG_DOS_PARTITION
	69	#define CONFIG_ISO_PARTITION
	70
	71	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	72
	73	#define CONFIG_SYS_ALT_MEMTEST /* Much more complex memory test */
	74
	75	/*
	76	* Supported commands
	77	*/
4387cf1a AG	78	#define CONFIG_CMD_EEPROM
	79	#define CONFIG_CMD_FAT
	80	#define CONFIG_CMD_I2C
	81	#define CONFIG_CMD_MII
	82	#define CONFIG_CMD_PING
	83	#define CONFIG_CMD_DHCP
	84	#ifdef CONFIG_PCI
	85	#define CONFIG_CMD_PCI
	86	#endif
	87	#ifdef CONFIG_POST
	88	#define CONFIG_CMD_DIAG
	89	#endif
	90
	91	#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) \|\| (CONFIG_SYS_TEXT_BASE == 0xFF000000)
	92	/* Boot low with 16 or 32 MB Flash */
	93	#define CONFIG_SYS_LOWBOOT 1
	94	#elif (CONFIG_SYS_TEXT_BASE != 0x00100000)
	95	#error "CONFIG_SYS_TEXT_BASE value is invalid"
	96	#endif
	97
4387cf1a AG	98	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	99
	100	#define CONFIG_PREBOOT "run master"
	101
	102	#undef CONFIG_BOOTARGS
	103
4387cf1a AG	104	#if !defined(CONFIG_CONSOLE_DEV)
	105	#define CONFIG_CONSOLE_DEV "ttyPSC1"
	106	#endif
	107
	108	/*
	109	* Default environment for booting old and new kernel versions
	110	*/
	111	#define CONFIG_IFM_DEFAULT_ENV_OLD \
	112	"flash_self_old=run ramargs addip addmem;" \
	113	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	114	"flash_nfs_old=run nfsargs addip addmem;" \
	115	"bootm ${kernel_addr}\0" \
	116	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
	117	"run nfsargs addip addmem;" \
	118	"bootm ${kernel_addr_r}\0"
	119
	120	#define CONFIG_IFM_DEFAULT_ENV_NEW \
	121	"fdt_addr_r=900000\0" \
	122	"fdt_file="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME".dtb\0" \
	123	"flash_self=run ramargs addip addtty addmisc;" \
	124	"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
	125	"flash_nfs=run nfsargs addip addtty addmisc;" \
	126	"bootm ${kernel_addr} - ${fdt_addr}\0" \
	127	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	128	"tftp ${fdt_addr_r} ${fdt_file}; " \
	129	"run nfsargs addip addtty addmisc;" \
	130	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
	131
	132	#define CONFIG_IFM_DEFAULT_ENV_SETTINGS \
	133	"IOpin=0x64\0" \
	134	"addip=setenv bootargs ${bootargs} " \
	135	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	136	":${hostname}:${netdev}:off panic=1\0" \
	137	"addmem=setenv bootargs ${bootargs} ${memlimit}\0" \
	138	"addmisc=sete bootargs ${bootargs} ${miscargs}\0" \
	139	"addtty=sete bootargs ${bootargs} console=" \
	140	CONFIG_CONSOLE_DEV ",${baudrate}\0" \
	141	"bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0" \
	142	"kernel_addr_r=600000\0" \
	143	"initrd_high=0x03e00000\0" \
	144	"memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0" \
4a8c3f69	145	"memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
4387cf1a AG	146	"netdev=eth0\0" \
	147	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	148	"nfsroot=${serverip}:${rootpath}\0" \
	149	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	150	"linuxname="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"\
	151	"progLinux=tftp 200000 ${linuxname};erase ${linbot} ${lintop};" \
	152	"cp.b ${fileaddr} ${linbot} ${filesize}\0" \
	153	"ramname="CONFIG_BOARD_NAME"/uRamdisk_"CONFIG_BOARD_NAME"_act\0"\
	154	"progRam=tftp 200000 ${ramname};erase ${rambot} ${ramtop};" \
	155	"cp.b ${fileaddr} ${rambot} ${filesize}\0" \
	156	"jffname="CONFIG_BOARD_NAME"/uJFFS2_"CONFIG_BOARD_NAME"_act\0" \
	157	"progJff=tftp 200000 ${jffname};erase ${jffbot} ${jfftop};" \
	158	"cp.b ${fileaddr} ${jffbot} ${filesize}\0" \
	159	"rootpath=/opt/eldk/ppc_6xx\0" \
	160	"uboname=" CONFIG_BOARD_NAME \
	161	"/u-boot.bin_" CONFIG_BOARD_NAME "_act\0" \
	162	"progubo=tftp 200000 ${uboname};" \
	163	"protect off ${ubobot} ${ubotop};" \
	164	"erase ${ubobot} ${ubotop};" \
	165	"cp.b ${fileaddr} ${ubobot} ${filesize}\0" \
	166	"unlock=yes\0" \
	167	"post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;" \
	168	"setenv bootdelay 1;" \
4a8c3f69	169	"crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" " \
4387cf1a AG	170	BOARD_POST_CRC32_END";" \
	171	"setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0"
	172
	173	#define CONFIG_BOOTCOMMAND "run post"
	174
	175	/*
	176	* IPB Bus clocking configuration.
	177	*/
	178	#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
	179
	180	#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
	181	/*
	182	* PCI Bus clocking configuration
	183	*
	184	* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
	185	* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
	186	* of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
	187	*/
	188	#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
	189	#endif
	190
	191	/*
	192	* I2C configuration
	193	*/
	194	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	195	#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */
	196	#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
	197	#define CONFIG_SYS_I2C_SLAVE 0x7F
	198
	199	/*
	200	* EEPROM configuration:
	201	*
	202	* O2DNT board is equiped with Ramtron FRAM device FM24CL16
	203	* 16 Kib Ferroelectric Nonvolatile serial RAM memory
	204	* organized as 2048 x 8 bits and addressable as eight I2C devices
	205	* 0x50 ... 0x57 each 256 bytes in size
	206	*
	207	*/
	208	#define CONFIG_SYS_I2C_FRAM
	209	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
	210	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	211	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	212	/*
	213	* There is no write delay with FRAM, write operations are performed at bus
	214	* speed. Thus, no status polling or write delay is needed.
	215	*/
	216
	217	/*
	218	* Flash configuration
	219	*/
	220	#define CONFIG_SYS_FLASH_CFI 1
	221	#define CONFIG_FLASH_CFI_DRIVER 1
	222	#define CONFIG_FLASH_16BIT
	223	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	224	#define CONFIG_SYS_FLASH_CFI_AMD_RESET
	225	#define CONFIG_SYS_FLASH_EMPTY_INFO
	226
	227	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
	228	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	229	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Erase Timeout (in ms) */
	230	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (in ms) */
	231	/* Timeout for Flash Clear Lock Bits (in ms) */
	232	#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000
	233	/* "Real" (hardware) sectors protection */
234	#define CONFIG_SYS_FLASH_PROTECTION
235
236	/*
237	* Environment settings
238	*/
239	#define CONFIG_ENV_IS_IN_FLASH 1
240	#define CONFIG_ENV_SIZE 0x20000
241	#define CONFIG_ENV_SECT_SIZE 0x20000
242	#define CONFIG_ENV_OVERWRITE 1
243	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000)
244
245	/*
246	* Memory map
247	*/
248	#define CONFIG_SYS_MBAR 0xF0000000
249	#define CONFIG_SYS_SDRAM_BASE 0x00000000
250	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
251
252	/* Use SRAM until RAM will be available */
253	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
254	#ifdef CONFIG_POST
255	/* preserve space for the post_word at end of on-chip SRAM */
b39d1213	256	#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE
4387cf1a AG	257	#else
4387cf1a AG	258	/* End of used area in DPRAM */
b39d1213	259	#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
4387cf1a AG	260	#endif
4387cf1a AG	261
b39d1213	262	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
627b73e2	263	GENERATED_GBL_DATA_SIZE)
4387cf1a AG	264	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	265
	266	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	267	#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* 192 kB for Monitor */
	268	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */
	269	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial map for Linux */
	270
	271	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	272	#define CONFIG_SYS_RAMBOOT 1
	273	#endif
	274
	275	/*
	276	* Ethernet configuration
	277	*/
	278	#define CONFIG_MPC5xxx_FEC
	279	#define CONFIG_MPC5xxx_FEC_MII100
	280	#define CONFIG_PHY_ADDR 0x00
	281	#define CONFIG_RESET_PHY_R
	282
	283	/*
	284	* GPIO configuration
	285	*/
	286	#define CONFIG_SYS_GPIO_DATADIR 0x00000064 /* PSC1_2, PSC2_1,2 output */
	287	#define CONFIG_SYS_GPIO_OPENDRAIN 0x00000000 /* No open drain */
	288	#define CONFIG_SYS_GPIO_DATAVALUE 0x00000000 /* PSC1_1 to 1, rest to 0 */
	289	#define CONFIG_SYS_GPIO_ENABLE 0x00000064 /* PSC1_2, PSC2_1,2 enable */
	290
	291	/*
	292	* Miscellaneous configurable options
	293	*/
	294	#define CONFIG_SYS_LONGHELP /* undef to save memory */
4387cf1a	295	#define CONFIG_CMDLINE_EDITING
4387cf1a AG	296
	297	#if defined(CONFIG_CMD_KGDB)
	298	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	299	#else
	300	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	301	#endif
	302	/* Print Buffer Size */
	303	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	304	sizeof(CONFIG_SYS_PROMPT) + 16)
	305	/* max number of command args */
	306	#define CONFIG_SYS_MAXARGS 16
	307	/* Boot Argument Buffer Size */
	308	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	309
	310	/* default load address */
	311	#define CONFIG_SYS_LOAD_ADDR 0x100000
	312
	313	/* decrementer freq: 1 ms ticks */
4387cf1a AG	314
	315	/*
	316	* Various low-level settings
	317	*/
	318	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
	319	#define CONFIG_SYS_HID0_FINAL HID0_ICE
	320
	321	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	322	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	323	#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
	324	#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
	325
	326	#define CONFIG_BOARD_EARLY_INIT_R
	327
	328	#define CONFIG_SYS_CS_BURST 0x00000000
	329	#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
	330
	331	/*
	332	* DT support
	333	*/
4387cf1a AG	334	#define OF_CPU "PowerPC,5200@0"
	335	#define OF_SOC "soc5200@f0000000"
	336	#define OF_TBCLK (bd->bi_busfreq / 4)
	337
	338	#endif /* __O2D_CONFIG_H */