[people/ms/u-boot.git] / include / configs / o2mnt.h

/*
 * (C) Copyright 2012
 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * Valid values for CONFIG_SYS_TEXT_BASE are:
 * 0xFF000000   boot low boot high (standard configuration)
 * 0x00100000   boot from RAM (for testing only)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xff000000	/* Standard: boot low */
#endif

/* Board specific flash config */
#define CONFIG_SYS_FLASH_BASE		0xff000000
#define CONFIG_SYS_FLASH_SIZE		0x01000000      /* maximum 16MB */
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT	128

/*
 * Include common defines for all ifm boards
 */
#include "o2dnt-common.h"

/* GPIO configuration */
#define CONFIG_SYS_GPS_PORT_CONFIG	0x00002004	/* no CAN */

/* Other board specific configs */
#define CONFIG_NETCONSOLE

#define CONFIG_SYS_BOOTCS_CFG		0x00087801
#define CONFIG_SYS_RESET_ADDRESS	0xff000000

#define CONFIG_SYS_MEMTEST_START	0x00100000      /* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x03f00000	/* 1 - 63 MB in DRAM  */

#define CONFIG_BOARD_NAME		"o2mnt"
#define CONFIG_BOARD_BOOTCMD		"${newcmd}"
#define CONFIG_BOARD_MEM_LIMIT		__stringify(62)
#define BOARD_POST_CRC32_END		__stringify(0x01000000)

#ifndef CONFIG_IFM_SENSOR_TYPE
#define CONFIG_IFM_SENSOR_TYPE		"O2M110"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS					\
	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
	CONFIG_IFM_DEFAULT_ENV_OLD					\
	CONFIG_IFM_DEFAULT_ENV_NEW					\
	"linbot=ff060000\0"						\
	"lintop=ff25ffff\0"						\
	"rambot=ff260000\0"						\
	"ramtop=ffc5ffff\0"						\
	"jffbot=ffc60000\0"						\
	"jfftop=ffffffff\0"						\
	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
	"ubotop=ff03ffff\0"						\
	"kernel_addr=0xff060000\0"					\
	"ramdisk_addr=0xff260000\0"					\
	"newcmd=run scrprot;run flash_ext2\0"				\
	"scrprot=protect on ${linbot} ${lintop};protect on ${rambot} "	\
		"${ramtop}\0"						\
	"flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0"	\
	"ext2args=setenv bootargs root=/dev/mtdblock3 ro "		\
		"rootfstype=ext2\0"					\
	"pwm=mw f0000674 0x10006;mw f0000678 0x30000;"			\
		"mw f0000678 0x30001;mw f0000670 0x3\0"			\
	"master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);"		\
		"mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0"	\
	"sensortyp="CONFIG_IFM_SENSOR_TYPE"\0"				\
	"srelease=0.00\0"
Commit	Line	Data
4387cf1a AG	1	/*
	2	* (C) Copyright 2012
	3	* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
4387cf1a AG	6	*/
	7
	8	/*
	9	* Valid values for CONFIG_SYS_TEXT_BASE are:
	10	* 0xFF000000 boot low boot high (standard configuration)
	11	* 0x00100000 boot from RAM (for testing only)
	12	*/
	13	#ifndef CONFIG_SYS_TEXT_BASE
	14	#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */
	15	#endif
	16
	17	/* Board specific flash config */
	18	#define CONFIG_SYS_FLASH_BASE 0xff000000
	19	#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */
	20	/* max number of sectors on one chip */
	21	#define CONFIG_SYS_MAX_FLASH_SECT 128
	22
	23	/*
	24	* Include common defines for all ifm boards
	25	*/
	26	#include "o2dnt-common.h"
	27
	28	/* GPIO configuration */
	29	#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */
	30
	31	/* Other board specific configs */
	32	#define CONFIG_NETCONSOLE
	33
	34	#define CONFIG_SYS_BOOTCS_CFG 0x00087801
	35	#define CONFIG_SYS_RESET_ADDRESS 0xff000000
	36
	37	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	38	#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
	39
	40	#define CONFIG_BOARD_NAME "o2mnt"
	41	#define CONFIG_BOARD_BOOTCMD "${newcmd}"
4a8c3f69 AG	42	#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
4a8c3f69 AG	43	#define BOARD_POST_CRC32_END __stringify(0x01000000)
4387cf1a AG	44
	45	#ifndef CONFIG_IFM_SENSOR_TYPE
	46	#define CONFIG_IFM_SENSOR_TYPE "O2M110"
	47	#endif
	48
	49	#define CONFIG_EXTRA_ENV_SETTINGS \
	50	CONFIG_IFM_DEFAULT_ENV_SETTINGS \
	51	CONFIG_IFM_DEFAULT_ENV_OLD \
	52	CONFIG_IFM_DEFAULT_ENV_NEW \
	53	"linbot=ff060000\0" \
	54	"lintop=ff25ffff\0" \
	55	"rambot=ff260000\0" \
	56	"ramtop=ffc5ffff\0" \
	57	"jffbot=ffc60000\0" \
	58	"jfftop=ffffffff\0" \
4a8c3f69	59	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
4387cf1a AG	60	"ubotop=ff03ffff\0" \
	61	"kernel_addr=0xff060000\0" \
	62	"ramdisk_addr=0xff260000\0" \
	63	"newcmd=run scrprot;run flash_ext2\0" \
	64	"scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \
	65	"${ramtop}\0" \
	66	"flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \
	67	"ext2args=setenv bootargs root=/dev/mtdblock3 ro " \
	68	"rootfstype=ext2\0" \
	69	"pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \
	70	"mw f0000678 0x30001;mw f0000670 0x3\0" \
	71	"master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \
	72	"mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \
	73	"sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \
	74	"srelease=0.00\0"