[people/ms/u-boot.git] / include / configs / o3dnt.h

/*
 * (C) Copyright 2012
 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * Valid values for CONFIG_SYS_TEXT_BASE are:
 * 0xFC000000   boot low boot high (standard configuration)
 * 0x00100000   boot from RAM (for testing only)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xfc000000	/* Standard: boot low */
#endif

/* Board specific flash config */
#define CONFIG_SYS_FLASH_BASE		0xfc000000
#define CONFIG_SYS_FLASH_SIZE		0x04000000      /* maximum 64MB */
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT	512

/*
 * Include common defines for all ifm boards
 */
#include "o2dnt-common.h"

/* Additional commands */
#define CONFIG_CMD_REGINFO

/*
 * GPIO configuration:
 * no CAN + no PCI
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0x0000A000

/* Other board specific configs */
#define CONFIG_SYS_BOOTCS_CFG		0x00057d01
#define CONFIG_SYS_RESET_ADDRESS	0xfc000000

#define CONFIG_SYS_MEMTEST_START	0x00100000      /* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x03f00000	/* 1 - 63 MB in DRAM */

#define CONFIG_BOARD_NAME		"o3dnt"
#define CONFIG_BOARD_BOOTCMD		"run flash_self"
#define CONFIG_BOARD_MEM_LIMIT		__stringify(62)
#define BOARD_POST_CRC32_END		__stringify(0x01000000)

#define CONFIG_EXTRA_ENV_SETTINGS					\
	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
	CONFIG_IFM_DEFAULT_ENV_OLD					\
	CONFIG_IFM_DEFAULT_ENV_NEW					\
	"linbot=fc060000\0"						\
	"lintop=fc15ffff\0"						\
	"rambot=fc160000\0"						\
	"ramtop=fc55ffff\0"						\
	"jffbot=fc560000\0"						\
	"jfftop=fce5ffff\0"						\
	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
	"ubotop=fc03ffff\0"						\
	"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"	\
	"calbot=fce60000\0"						\
	"caltop=fcffffff\0"						\
	"progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};"	\
		"cp.b ${fileaddr} ${calbot} ${filesize}\0"		\
	"kernel_addr=0xfc060000\0"					\
	"ramdisk_addr=0xfc160000\0"					\
	"master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};"		\
		"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"
Commit	Line	Data
4387cf1a AG	1	/*
	2	* (C) Copyright 2012
	3	* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
4387cf1a AG	6	*/
	7
	8	/*
	9	* Valid values for CONFIG_SYS_TEXT_BASE are:
	10	* 0xFC000000 boot low boot high (standard configuration)
	11	* 0x00100000 boot from RAM (for testing only)
	12	*/
	13	#ifndef CONFIG_SYS_TEXT_BASE
	14	#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
	15	#endif
	16
	17	/* Board specific flash config */
	18	#define CONFIG_SYS_FLASH_BASE 0xfc000000
	19	#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
	20	/* max number of sectors on one chip */
	21	#define CONFIG_SYS_MAX_FLASH_SECT 512
	22
	23	/*
	24	* Include common defines for all ifm boards
	25	*/
	26	#include "o2dnt-common.h"
	27
	28	/* Additional commands */
4387cf1a AG	29	#define CONFIG_CMD_REGINFO
	30
	31	/*
	32	* GPIO configuration:
	33	* no CAN + no PCI
	34	*/
	35	#define CONFIG_SYS_GPS_PORT_CONFIG 0x0000A000
	36
	37	/* Other board specific configs */
	38	#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
	39	#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
	40
	41	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	42	#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
	43
	44	#define CONFIG_BOARD_NAME "o3dnt"
	45	#define CONFIG_BOARD_BOOTCMD "run flash_self"
4a8c3f69 AG	46	#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
4a8c3f69 AG	47	#define BOARD_POST_CRC32_END __stringify(0x01000000)
4387cf1a AG	48
	49	#define CONFIG_EXTRA_ENV_SETTINGS \
	50	CONFIG_IFM_DEFAULT_ENV_SETTINGS \
	51	CONFIG_IFM_DEFAULT_ENV_OLD \
	52	CONFIG_IFM_DEFAULT_ENV_NEW \
	53	"linbot=fc060000\0" \
	54	"lintop=fc15ffff\0" \
	55	"rambot=fc160000\0" \
	56	"ramtop=fc55ffff\0" \
	57	"jffbot=fc560000\0" \
	58	"jfftop=fce5ffff\0" \
4a8c3f69	59	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
4387cf1a AG	60	"ubotop=fc03ffff\0" \
	61	"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \
	62	"calbot=fce60000\0" \
	63	"caltop=fcffffff\0" \
	64	"progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \
	65	"cp.b ${fileaddr} ${calbot} ${filesize}\0" \
	66	"kernel_addr=0xfc060000\0" \
	67	"ramdisk_addr=0xfc160000\0" \
	68	"master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};" \
	69	"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"