projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| a868e443 PH |
1 | /* |
| 2 | * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ | |
| 3 | * | |
| 4 | * Based on davinci_dvevm.h. Original Copyrights follow: | |
| 5 | * | |
| 6 | * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> | |
| 7 | * | |
| 5b8031cc | 8 | * SPDX-License-Identifier: GPL-2.0 |
| a868e443 PH |
9 | */ |
| 10 | ||
| 11 | #ifndef __CONFIG_H | |
| 12 | #define __CONFIG_H | |
| 13 | ||
| 14 | /* | |
| 15 | * Board | |
| 16 | */ | |
| 17 | #define CONFIG_DRIVER_TI_EMAC | |
| 18 | #undef CONFIG_USE_SPIFLASH | |
| 19 | #undef CONFIG_SYS_USE_NOR | |
| 20 | #define CONFIG_USE_NAND | |
| 21 | ||
| 22 | /* | |
| 23 | * SoC Configuration | |
| 24 | */ | |
| 25 | #define CONFIG_MACH_OMAPL138_LCDK | |
| 26 | #define CONFIG_ARM926EJS /* arm926ejs CPU core */ | |
| 27 | #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ | |
| 28 | #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) | |
| 29 | #define CONFIG_SYS_OSCIN_FREQ 24000000 | |
| 30 | #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE | |
| 31 | #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) | |
| 32 | #define CONFIG_SYS_HZ 1000 | |
| 33 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
| 34 | #define CONFIG_SYS_TEXT_BASE 0xc1080000 | |
| 35 | ||
| 36 | /* | |
| 37 | * Memory Info | |
| 38 | */ | |
| 39 | #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ | |
| 40 | #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ | |
| 41 | #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ | |
| 42 | #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ | |
| 43 | ||
| 44 | /* memtest start addr */ | |
| 45 | #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) | |
| 46 | ||
| 47 | /* memtest will be run on 16MB */ | |
| 48 | #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) | |
| 49 | ||
| 50 | #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ | |
| 51 | #define CONFIG_STACKSIZE (256*1024) /* regular stack */ | |
| 52 | ||
| 53 | #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ | |
| 54 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ | |
| 55 | DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ | |
| 56 | DAVINCI_SYSCFG_SUSPSRC_UART2 | \ | |
| 57 | DAVINCI_SYSCFG_SUSPSRC_EMAC | \ | |
| 58 | DAVINCI_SYSCFG_SUSPSRC_I2C) | |
| 59 | ||
| 60 | /* | |
| 61 | * PLL configuration | |
| 62 | */ | |
| 63 | #define CONFIG_SYS_DV_CLKMODE 0 | |
| 64 | #define CONFIG_SYS_DA850_PLL0_POSTDIV 1 | |
| 65 | #define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 | |
| 66 | #define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 | |
| 67 | #define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 | |
| 68 | #define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 | |
| 69 | #define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 | |
| 70 | #define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 | |
| 71 | #define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 | |
| 72 | ||
| 73 | #define CONFIG_SYS_DA850_PLL1_POSTDIV 1 | |
| 74 | #define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 | |
| 75 | #define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 | |
| 76 | #define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8003 | |
| 77 | ||
| 78 | #define CONFIG_SYS_DA850_PLL0_PLLM 24 | |
| 79 | #define CONFIG_SYS_DA850_PLL1_PLLM 21 | |
| 80 | ||
| 81 | /* | |
| 82 | * Serial Driver info | |
| 83 | */ | |
| a868e443 PH |
84 | #define CONFIG_SYS_NS16550_SERIAL |
| 85 | #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ | |
| 86 | #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ | |
| 87 | #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) | |
| 88 | #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ | |
| 89 | #define CONFIG_BAUDRATE 115200 /* Default baud rate */ | |
| 90 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } | |
| 91 | ||
| 92 | #define CONFIG_SPI | |
| a868e443 PH |
93 | #define CONFIG_DAVINCI_SPI |
| 94 | #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE | |
| 95 | #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) | |
| 96 | #define CONFIG_SF_DEFAULT_SPEED 30000000 | |
| 97 | #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED | |
| 98 | ||
| 99 | #ifdef CONFIG_USE_SPIFLASH | |
| 100 | #define CONFIG_SPL_SPI_SUPPORT | |
| 101 | #define CONFIG_SPL_SPI_FLASH_SUPPORT | |
| 102 | #define CONFIG_SPL_SPI_LOAD | |
| 103 | #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 | |
| 104 | #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 | |
| 105 | #endif | |
| 106 | ||
| 107 | /* | |
| 108 | * I2C Configuration | |
| 109 | */ | |
| 110 | #define CONFIG_SYS_I2C | |
| 111 | #define CONFIG_SYS_I2C_DAVINCI | |
| 112 | #define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 | |
| 113 | #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ | |
| 114 | #define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 | |
| 115 | ||
| 116 | /* | |
| 117 | * Flash & Environment | |
| 118 | */ | |
| 119 | #ifdef CONFIG_USE_NAND | |
| 120 | #undef CONFIG_ENV_IS_IN_FLASH | |
| 121 | #define CONFIG_NAND_DAVINCI | |
| 122 | #define CONFIG_SYS_NO_FLASH | |
| 123 | #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ | |
| 124 | #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ | |
| 125 | #define CONFIG_ENV_SIZE (128 << 9) | |
| 126 | #define CONFIG_SYS_NAND_USE_FLASH_BBT | |
| 127 | #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST | |
| 128 | #define CONFIG_SYS_NAND_PAGE_2K | |
| 129 | #define CONFIG_SYS_NAND_BUSWIDTH_16_BIT | |
| 130 | #define CONFIG_SYS_NAND_CS 3 | |
| 131 | #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE | |
| 132 | #define CONFIG_SYS_CLE_MASK 0x10 | |
| 133 | #define CONFIG_SYS_ALE_MASK 0x8 | |
| 134 | #undef CONFIG_SYS_NAND_HW_ECC | |
| 135 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ | |
| 136 | #define NAND_MAX_CHIPS 1 | |
| 137 | #endif | |
| 138 | ||
| 139 | #ifdef CONFIG_SYS_USE_NOR | |
| 140 | #define CONFIG_ENV_IS_IN_FLASH | |
| 141 | #undef CONFIG_SYS_NO_FLASH | |
| 142 | #define CONFIG_FLASH_CFI_DRIVER | |
| 143 | #define CONFIG_SYS_FLASH_CFI | |
| 144 | #define CONFIG_SYS_FLASH_PROTECTION | |
| 145 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ | |
| 146 | #define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ | |
| 147 | #define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3) | |
| 148 | #define CONFIG_ENV_SIZE (128 << 10) | |
| 149 | #define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE | |
| 150 | #define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ | |
| 151 | #define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\ | |
| 152 | + 3) | |
| 153 | #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ | |
| 154 | #endif | |
| 155 | ||
| 156 | #ifdef CONFIG_USE_SPIFLASH | |
| 157 | #undef CONFIG_ENV_IS_IN_FLASH | |
| 158 | #undef CONFIG_ENV_IS_IN_NAND | |
| 159 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 160 | #define CONFIG_ENV_SIZE (64 << 10) | |
| 161 | #define CONFIG_ENV_OFFSET (256 << 10) | |
| 162 | #define CONFIG_ENV_SECT_SIZE (64 << 10) | |
| 163 | #define CONFIG_SYS_NO_FLASH | |
| 164 | #endif | |
| 165 | ||
| 166 | /* | |
| 167 | * Network & Ethernet Configuration | |
| 168 | */ | |
| 169 | #ifdef CONFIG_DRIVER_TI_EMAC | |
| 170 | #define CONFIG_EMAC_MDIO_PHY_NUM 7 | |
| 171 | #define CONFIG_MII | |
| 172 | #undef CONFIG_DRIVER_TI_EMAC_USE_RMII | |
| 173 | #define CONFIG_BOOTP_DEFAULT | |
| 174 | #define CONFIG_BOOTP_DNS | |
| 175 | #define CONFIG_BOOTP_DNS2 | |
| 176 | #define CONFIG_BOOTP_SEND_HOSTNAME | |
| 177 | #define CONFIG_NET_RETRY_COUNT 10 | |
| a868e443 PH |
178 | #endif |
| 179 | ||
| 180 | /* | |
| 181 | * U-Boot general configuration | |
| 182 | */ | |
| a868e443 PH |
183 | #define CONFIG_MISC_INIT_R |
| 184 | #define CONFIG_BOARD_EARLY_INIT_F | |
| 185 | #define CONFIG_BOOTFILE "uImage" /* Boot file name */ | |
| a868e443 PH |
186 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| 187 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 188 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 189 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ | |
| 190 | #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) | |
| a868e443 | 191 | #define CONFIG_AUTO_COMPLETE |
| a868e443 PH |
192 | #define CONFIG_CMDLINE_EDITING |
| 193 | #define CONFIG_SYS_LONGHELP | |
| 194 | #define CONFIG_CRC32_VERIFY | |
| 195 | #define CONFIG_MX_CYCLIC | |
| a868e443 PH |
196 | |
| 197 | /* | |
| 198 | * Linux Information | |
| 199 | */ | |
| 200 | #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) | |
| 201 | #define CONFIG_CMDLINE_TAG | |
| 202 | #define CONFIG_REVISION_TAG | |
| 203 | #define CONFIG_SETUP_MEMORY_TAGS | |
| 204 | #define CONFIG_BOOTARGS "console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off" | |
| d03a0308 | 205 | #define CONFIG_BOOTCOMMAND "if mmc rescan; then if fatload mmc 0 0xc0600000 boot.scr; then source 0xc0600000; else fatload mmc 0 0xc0700000 uImage; bootm c0700000; fi; else sf probe 0; sf read 0xc0700000 0x80000 0x220000; bootm 0xc0700000; fi" |
| a868e443 PH |
206 | |
| 207 | /* | |
| 208 | * U-Boot commands | |
| 209 | */ | |
| a868e443 | 210 | #define CONFIG_CMD_ENV |
| a868e443 | 211 | #define CONFIG_CMD_DIAG |
| a868e443 | 212 | #define CONFIG_CMD_SAVES |
| a868e443 PH |
213 | #ifdef CONFIG_CMD_BDI |
| 214 | #define CONFIG_CLOCKS | |
| 215 | #endif | |
| 216 | ||
| 217 | #ifndef CONFIG_DRIVER_TI_EMAC | |
| a868e443 PH |
218 | #endif |
| 219 | ||
| 220 | #ifdef CONFIG_USE_NAND | |
| a868e443 PH |
221 | #define CONFIG_CMD_NAND |
| 222 | ||
| 223 | #define CONFIG_CMD_MTDPARTS | |
| 224 | #define CONFIG_MTD_DEVICE | |
| 225 | #define CONFIG_MTD_PARTITIONS | |
| 226 | #define CONFIG_LZO | |
| 227 | #define CONFIG_RBTREE | |
| 228 | #define CONFIG_CMD_UBI | |
| 229 | #define CONFIG_CMD_UBIFS | |
| 230 | #endif | |
| 231 | ||
| 232 | #ifdef CONFIG_USE_SPIFLASH | |
| a868e443 PH |
233 | #endif |
| 234 | ||
| 235 | #if !defined(CONFIG_USE_NAND) && \ | |
| 236 | !defined(CONFIG_SYS_USE_NOR) && \ | |
| 237 | !defined(CONFIG_USE_SPIFLASH) | |
| 238 | #define CONFIG_ENV_IS_NOWHERE | |
| 239 | #define CONFIG_SYS_NO_FLASH | |
| 240 | #define CONFIG_ENV_SIZE (16 << 10) | |
| a868e443 PH |
241 | #undef CONFIG_CMD_ENV |
| 242 | #endif | |
| 243 | ||
| 244 | /* SD/MMC */ | |
| 245 | #define CONFIG_MMC | |
| 246 | #define CONFIG_GENERIC_MMC | |
| 247 | #define CONFIG_DAVINCI_MMC | |
| 248 | ||
| 249 | #ifdef CONFIG_MMC | |
| 250 | #define CONFIG_DOS_PARTITION | |
| a868e443 PH |
251 | #undef CONFIG_ENV_IS_IN_MMC |
| 252 | #endif | |
| 253 | ||
| 254 | #ifdef CONFIG_ENV_IS_IN_MMC | |
| 255 | #undef CONFIG_ENV_SIZE | |
| 256 | #undef CONFIG_ENV_OFFSET | |
| 257 | #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ | |
| 258 | #define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ | |
| 259 | #undef CONFIG_ENV_IS_IN_FLASH | |
| 260 | #undef CONFIG_ENV_IS_IN_NAND | |
| 261 | #undef CONFIG_ENV_IS_IN_SPI_FLASH | |
| 262 | #endif | |
| 263 | ||
| 264 | #ifndef CONFIG_DIRECT_NOR_BOOT | |
| 265 | /* defines for SPL */ | |
| 266 | #define CONFIG_SPL_FRAMEWORK | |
| 267 | #define CONFIG_SPL_BOARD_INIT | |
| 268 | #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ | |
| 269 | CONFIG_SYS_MALLOC_LEN) | |
| 270 | #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN | |
| 271 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 272 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
| 273 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
| 274 | #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" | |
| 275 | #define CONFIG_SPL_STACK 0x8001ff00 | |
| 276 | #define CONFIG_SPL_TEXT_BASE 0x80000000 | |
| 277 | #define CONFIG_SPL_MAX_FOOTPRINT 32768 | |
| 278 | #define CONFIG_SPL_PAD_TO 32768 | |
| 279 | #endif | |
| 280 | ||
| 281 | /* additions for new relocation code, must added to all boards */ | |
| 282 | #define CONFIG_SYS_SDRAM_BASE 0xc0000000 | |
| 283 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ | |
| 284 | GENERATED_GBL_DATA_SIZE) | |
| 285 | #endif /* __CONFIG_H */ |