]>
Commit | Line | Data |
---|---|---|
35629363 AA |
1 | /* |
2 | * (C) Copyright 2009 | |
3 | * Net Insight <www.netinsight.net> | |
4 | * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> | |
5 | * | |
6 | * Based on sheevaplug.h: | |
7 | * (C) Copyright 2009 | |
8 | * Marvell Semiconductor <www.marvell.com> | |
9 | * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | |
10 | * | |
11 | * SPDX-License-Identifier: GPL-2.0+ | |
12 | */ | |
13 | ||
14 | #ifndef _CONFIG_OPENRD_H | |
15 | #define _CONFIG_OPENRD_H | |
16 | ||
35629363 AA |
17 | /* |
18 | * High Level Configuration Options (easy to change) | |
19 | */ | |
20 | #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ | |
21 | #define CONFIG_KW88F6281 1 /* SOC Name */ | |
22 | #define CONFIG_MACH_OPENRD_BASE /* Machine type */ | |
23 | #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ | |
35629363 AA |
24 | |
25 | /* | |
26 | * Commands configuration | |
27 | */ | |
35629363 | 28 | #define CONFIG_SYS_MVFS |
35629363 | 29 | #define CONFIG_CMD_NAND |
35629363 AA |
30 | |
31 | /* | |
32 | * mv-common.h should be defined after CMD configs since it used them | |
33 | * to enable certain macros | |
34 | */ | |
35 | #include "mv-common.h" | |
36 | ||
37 | /* | |
38 | * Environment variables configurations | |
39 | */ | |
40 | #ifdef CONFIG_CMD_NAND | |
35629363 | 41 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ |
35629363 AA |
42 | #endif |
43 | /* | |
44 | * max 4k env size is enough, but in case of nand | |
45 | * it has to be rounded to sector size | |
46 | */ | |
47 | #define CONFIG_ENV_SIZE 0x20000 /* 128k */ | |
48 | #define CONFIG_ENV_ADDR 0x60000 | |
49 | #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ | |
50 | /* | |
51 | * Environment is right behind U-Boot in flash. Make sure U-Boot | |
52 | * doesn't grow into the environment area. | |
53 | */ | |
54 | #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET | |
55 | ||
56 | /* | |
57 | * Default environment variables | |
58 | */ | |
59 | #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ | |
60 | "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ | |
61 | "${x_bootcmd_usb}; bootm 0x6400000;" | |
62 | ||
63 | #define MTDIDS_DEFAULT "nand0=nand_mtd" | |
64 | #define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ | |
65 | "0x400000@0x100000(uImage),"\ | |
66 | "0x1fb00000@0x500000(rootfs)" | |
67 | ||
68 | #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ | |
69 | "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ | |
70 | "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ | |
71 | "x_bootcmd_usb=usb start\0" \ | |
72 | "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ | |
73 | "mtdids="MTDIDS_DEFAULT"\0" \ | |
74 | "mtdparts="MTDPARTS_DEFAULT"\0" | |
75 | ||
76 | /* | |
77 | * Ethernet Driver configuration | |
78 | */ | |
79 | #ifdef CONFIG_CMD_NET | |
80 | # ifdef CONFIG_BOARD_IS_OPENRD_BASE | |
81 | # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ | |
82 | # else | |
83 | # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ | |
84 | # endif | |
85 | # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE | |
86 | # define CONFIG_PHY_BASE_ADR 0x0 | |
87 | # define PHY_NO "88E1121" | |
88 | # else | |
89 | # define CONFIG_PHY_BASE_ADR 0x8 | |
90 | # define PHY_NO "88E1116" | |
91 | # endif | |
92 | #endif /* CONFIG_CMD_NET */ | |
93 | ||
94 | /* | |
95 | * SATA Driver configuration | |
96 | */ | |
97 | #ifdef CONFIG_MVSATA_IDE | |
98 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET | |
99 | #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET | |
100 | #endif /*CONFIG_MVSATA_IDE*/ | |
101 | ||
102 | #ifdef CONFIG_CMD_MMC | |
35629363 AA |
103 | #define CONFIG_MVEBU_MMC |
104 | #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE | |
105 | #endif /* CONFIG_CMD_MMC */ | |
106 | ||
107 | #endif /* _CONFIG_OPENRD_BASE_H */ |