]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/openrd.h
flash: complete CONFIG_SYS_NO_FLASH move with renaming
[people/ms/u-boot.git] / include / configs / openrd.h
CommitLineData
35629363
AA
1/*
2 * (C) Copyright 2009
3 * Net Insight <www.netinsight.net>
4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
5 *
6 * Based on sheevaplug.h:
7 * (C) Copyright 2009
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13
14#ifndef _CONFIG_OPENRD_H
15#define _CONFIG_OPENRD_H
16
35629363
AA
17/*
18 * High Level Configuration Options (easy to change)
19 */
20#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
21#define CONFIG_KW88F6281 1 /* SOC Name */
22#define CONFIG_MACH_OPENRD_BASE /* Machine type */
23#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
24#define CONFIG_SYS_THUMB_BUILD
25
26/*
27 * Commands configuration
28 */
35629363 29#define CONFIG_SYS_MVFS
35629363 30#define CONFIG_CMD_ENV
35629363 31#define CONFIG_CMD_NAND
35629363
AA
32#define CONFIG_CMD_IDE
33
34/*
35 * mv-common.h should be defined after CMD configs since it used them
36 * to enable certain macros
37 */
38#include "mv-common.h"
39
40/*
41 * Environment variables configurations
42 */
43#ifdef CONFIG_CMD_NAND
44#define CONFIG_ENV_IS_IN_NAND 1
45#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
46#else
47#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
48#endif
49/*
50 * max 4k env size is enough, but in case of nand
51 * it has to be rounded to sector size
52 */
53#define CONFIG_ENV_SIZE 0x20000 /* 128k */
54#define CONFIG_ENV_ADDR 0x60000
55#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
56/*
57 * Environment is right behind U-Boot in flash. Make sure U-Boot
58 * doesn't grow into the environment area.
59 */
60#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
61
62/*
63 * Default environment variables
64 */
65#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
66 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
67 "${x_bootcmd_usb}; bootm 0x6400000;"
68
69#define MTDIDS_DEFAULT "nand0=nand_mtd"
70#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
71 "0x400000@0x100000(uImage),"\
72 "0x1fb00000@0x500000(rootfs)"
73
74#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
75 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
76 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
77 "x_bootcmd_usb=usb start\0" \
78 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \
79 "mtdids="MTDIDS_DEFAULT"\0" \
80 "mtdparts="MTDPARTS_DEFAULT"\0"
81
82/*
83 * Ethernet Driver configuration
84 */
85#ifdef CONFIG_CMD_NET
86# ifdef CONFIG_BOARD_IS_OPENRD_BASE
87# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
88# else
89# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
90# endif
91# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
92# define CONFIG_PHY_BASE_ADR 0x0
93# define PHY_NO "88E1121"
94# else
95# define CONFIG_PHY_BASE_ADR 0x8
96# define PHY_NO "88E1116"
97# endif
98#endif /* CONFIG_CMD_NET */
99
100/*
101 * SATA Driver configuration
102 */
103#ifdef CONFIG_MVSATA_IDE
104#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
105#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
106#endif /*CONFIG_MVSATA_IDE*/
107
108#ifdef CONFIG_CMD_MMC
35629363
AA
109#define CONFIG_MVEBU_MMC
110#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
111#endif /* CONFIG_CMD_MMC */
112
113#endif /* _CONFIG_OPENRD_BASE_H */