[people/ms/u-boot.git] / include / configs / opos6uldev.h

/*
 * Copyright (C) 2017 Armadeus Systems
 *
 * Configuration settings for the OPOS6ULDev board
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __OPOS6ULDEV_CONFIG_H
#define __OPOS6ULDEV_CONFIG_H

#include "mx6_common.h"

#ifdef CONFIG_SPL
#include "imx6_spl.h"

#ifdef CONFIG_SPL_BUILD
#undef CONFIG_DM_GPIO
#undef CONFIG_DM_MMC
#undef CONFIG_BLK

#define CONFIG_MXC_UART_BASE		UART1_BASE
#endif
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(16 << 20)

/* Miscellaneous configurable options */
#define CONFIG_STANDALONE_LOAD_ADDR	CONFIG_SYS_LOAD_ADDR

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* MMC */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SUPPORT_EMMC_BOOT

/* USB */
#ifdef CONFIG_USB_EHCI_MX6
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#endif

/* Ethernet */
#ifdef CONFIG_FEC_MXC
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR          0x1
#define CONFIG_FEC_XCV_TYPE             RMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_MII
#endif

/* LCD */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_SPLASH_SOURCE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_MXS
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#endif

/* Environment is stored in the eMMC boot partition */
#define CONFIG_SYS_MMC_ENV_DEV          0
#define CONFIG_SYS_MMC_ENV_PART         1
#define CONFIG_ENV_SIZE                 (10 * 1024)
#define CONFIG_ENV_OFFSET               (1024 * 1024) /* 1 MB */
#define CONFIG_ENV_OFFSET_REDUND        (1536 * 1024) /* 512KB from CONFIG_ENV_OFFSET */

#define CONFIG_ENV_VERSION	100
#define CONFIG_BOARD_NAME	opos6ul
#define ACFG_CONSOLE_DEV        ttymxc0
#define CONFIG_SYS_AUTOLOAD     "no"
#define CONFIG_ROOTPATH         "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
#define CONFIG_PREBOOT          "run check_env"
#define CONFIG_BOOTCOMMAND	"run emmcboot"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"env_version="          __stringify(CONFIG_ENV_VERSION)         "\0"                    \
	"consoledev="           __stringify(ACFG_CONSOLE_DEV)           "\0"                    \
	"board_name="           __stringify(CONFIG_BOARD_NAME)          "\0"                    \
	"fdt_addr=0x88000000\0"                                                                 \
	"fdt_high=0xffffffff\0"                                                                 \
	"fdt_name="           __stringify(CONFIG_BOARD_NAME)          "dev\0"                   \
	"initrd_high=0xffffffff\0"                                                              \
	"ip_dyn=yes\0"                                                                          \
	"stdin=serial\0"                                                                        \
	"stdout=serial\0"                                                                       \
	"stderr=serial\0"                                                                       \
	"mmcdev=0\0"                                                                            \
	"mmcpart=2\0"                                                                           \
	"mmcroot=/dev/mmcblk0p2 ro\0"                                                           \
	"mmcrootfstype=ext4 rootwait\0"                                                         \
	"kernelimg="           __stringify(CONFIG_BOARD_NAME)          "-linux.bin\0"           \
	"videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
	"check_env=if test -n ${flash_env_version}; "                                           \
		"then env default env_version; "                                                \
		"else env set flash_env_version ${env_version}; env save; "                     \
		"fi; "                                                                          \
		"if itest ${flash_env_version} != ${env_version}; then "                        \
			"echo \"*** Warning - Environment version"                              \
			" change suggests: run flash_reset_env; reset\"; "                      \
			"env default flash_reset_env; "                                         \
		"else exit; fi; \0"                                                             \
	"flash_reset_env=env default -f -a && saveenv && "                                      \
		"echo Environment variables erased!\0"                                          \
	"download_uboot_spl=tftpboot ${loadaddr} ${board_name}-u-boot.spl\0"                    \
	"flash_uboot_spl="                                                                      \
		"if mmc dev 0 1; then "                                                         \
			"setexpr sz ${filesize} / 0x200; "                                      \
			"setexpr sz ${sz} + 1; "                                                \
			"if mmc write ${loadaddr} 0x2 ${sz}; then "                             \
				"echo Flashing of U-boot SPL succeed; "                         \
			"else echo Flashing of U-boot SPL failed; "                             \
			"fi; "                                                                  \
		"fi;\0"                                                                         \
	"download_uboot_img=tftpboot ${loadaddr} ${board_name}-u-boot.img\0"                    \
	"flash_uboot_img="                                                                      \
		"if mmc dev 0 1; then "                                                         \
			"setexpr sz ${filesize} / 0x200; "                                      \
			"setexpr sz ${sz} + 1; "                                                \
			"if mmc write ${loadaddr} 0x8a ${sz}; then "                            \
				"echo Flashing of U-boot image succeed; "                       \
			"else echo Flashing of U-boot image failed; "                           \
			"fi; "                                                                  \
		"fi;\0"                                                                         \
	"update_uboot=run download_uboot_spl flash_uboot_spl "                                  \
		"download_uboot_img flash_uboot_img\0"                                          \
	"download_kernel=tftpboot ${loadaddr} ${kernelimg}\0"                                   \
	"flash_kernel="                                                                         \
		"if ext4write mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} ${filesize}; then "    \
			"echo kernel update succeed; "                                          \
			"else echo kernel update failed; "                                      \
		"fi;\0"                                                                         \
	"update_kernel=run download_kernel flash_kernel\0"                                      \
	"download_dtb=tftpboot ${fdt_addr} imx6ul-${fdt_name}.dtb\0"                            \
	"flash_dtb="                                                                            \
		"if ext4write mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb ${filesize}; then " \
			"echo dtb update succeed; "                                             \
			"else echo dtb update in failed; "                                      \
		"fi;\0"                                                                         \
	"update_dtb=run download_dtb flash_dtb\0"                                               \
	"download_rootfs=tftpboot ${loadaddr} ${board_name}-rootfs.ext4\0"                      \
	"flash_rootfs="                                                                         \
		"if mmc dev 0 0; then "                                                         \
			"setexpr nbblocks ${filesize} / 0x200; "                                \
			"setexpr nbblocks ${nbblocks} + 1; "                                    \
			"if mmc write ${loadaddr} 0x40800 ${nbblocks}; then "                   \
				"echo Flashing of rootfs image succeed; "                       \
			"else echo Flashing of rootfs image failed; "                           \
			"fi; "                                                                  \
		"fi;\0"                                                                         \
	"update_rootfs=run download_rootfs flash_rootfs\0"                                      \
	"flash_failsafe="                                                                       \
		"if mmc dev 0 0; then "                                                         \
			"setexpr nbblocks ${filesize} / 0x200; "                                \
			"setexpr nbblocks ${nbblocks} + 1; "                                    \
			"if mmc write ${loadaddr} 0x800 ${nbblocks}; then "                     \
				"echo Flashing of rootfs image in failsafe partition succeed; " \
			"else echo Flashing of rootfs image in failsafe partition failed; "     \
			"fi; "                                                                  \
		"fi;\0"                                                                         \
	"update_failsafe=run download_rootfs flash_failsafe\0"                                  \
	"download_userdata=tftpboot ${loadaddr} ${board_name}-user_data.ext4\0"                 \
	"flash_userdata="                                                                       \
		"if mmc dev 0 0; then "                                                         \
			"setexpr nbblocks ${filesize} / 0x200; "                                \
			"setexpr nbblocks ${nbblocks} + 1; "                                    \
			"if mmc write ${loadaddr} 0 ${nbblocks}; then "                         \
				"echo Flashing of user_data image succeed; "                    \
			"else echo Flashing of user_data image failed; "                        \
			"fi; "                                                                  \
		"fi;\0"                                                                         \
	"update_userdata=run download_userdata flash_userdata; mmc rescan\0"                    \
	"erase_userdata="                                                                       \
		"if mmc dev 0 0; then "                                                         \
			"echo Erasing eMMC User Data partition, no way out...; "                \
			"mw ${loadaddr} 0 0x200000; "                                           \
			"mmc write ${loadaddr} 0 0x1000; "                                      \
			"mmc write ${loadaddr} 0x800 0x1000; "                                  \
			"mmc write ${loadaddr} 0x40800 0x1000; "                                \
			"mmc write ${loadaddr} 0x440800 0x1000; "                               \
		"fi;"                                                                           \
		"mmc rescan\0"                                                                  \
	"update_all=run update_rootfs update_uboot\0"						\
	"initargs=setenv bootargs console=${consoledev},${baudrate} ${extrabootargs}\0"         \
	"addipargs=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:"                       \
		"${gatewayip}:${netmask}:${hostname}:eth0:off\0"                                \
	"addmmcargs=setenv bootargs ${bootargs} root=${mmcroot} "                               \
		"rootfstype=${mmcrootfstype}\0"                                                 \
	"emmcboot=run initargs; run addmmcargs; "                                               \
		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} && "              \
		"load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb && "    \
		"bootz ${loadaddr} - ${fdt_addr};\0"                                            \
	"emmcsafeboot=setenv mmcpart 1; setenv mmcroot /dev/mmcblk0p1 ro; run emmcboot;\0"      \
	"addnfsargs=setenv bootargs ${bootargs} root=/dev/nfs rw "                              \
		"nfsroot=${serverip}:${rootpath}\0"                                             \
	"nfsboot=run initargs; run addnfsargs addipargs; "                                      \
		"nfs ${loadaddr} ${serverip}:${rootpath}/boot/${kernelimg} && "                 \
		"nfs ${fdt_addr} ${serverip}:${rootpath}/boot/imx6ul-${fdt_name}.dtb && "       \
		"bootz ${loadaddr} - ${fdt_addr};\0"

#endif /* __OPOS6ULDEV_CONFIG_H */
Commit	Line	Data
77f29293 SS	1	/*
	2	* Copyright (C) 2017 Armadeus Systems
	3	*
	4	* Configuration settings for the OPOS6ULDev board
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __OPOS6ULDEV_CONFIG_H
	10	#define __OPOS6ULDEV_CONFIG_H
	11
	12	#include "mx6_common.h"
	13
	14	#ifdef CONFIG_SPL
	15	#include "imx6_spl.h"
	16
	17	#ifdef CONFIG_SPL_BUILD
	18	#undef CONFIG_DM_GPIO
	19	#undef CONFIG_DM_MMC
c46305a8	20	#undef CONFIG_BLK
77f29293 SS	21
	22	#define CONFIG_MXC_UART_BASE UART1_BASE
	23	#endif
	24	#endif
	25
	26	/* Size of malloc() pool */
	27	#define CONFIG_SYS_MALLOC_LEN (16 << 20)
	28
	29	/* Miscellaneous configurable options */
	30	#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
	31
	32	/* Physical Memory Map */
	33	#define CONFIG_NR_DRAM_BANKS 1
	34	#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
	35	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	36	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	37	#define CONFIG_SYS_INIT_SP_OFFSET \
	38	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	39	#define CONFIG_SYS_INIT_SP_ADDR \
	40	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	41
	42	/* MMC */
	43	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	44	#define CONFIG_SUPPORT_EMMC_BOOT
	45
	46	/* USB */
	47	#ifdef CONFIG_USB_EHCI_MX6
	48	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	49	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	50	#define CONFIG_MXC_USB_FLAGS 0
	51	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
77f29293 SS	52	#endif
	53
	54	/* Ethernet */
	55	#ifdef CONFIG_FEC_MXC
	56	#define IMX_FEC_BASE ENET_BASE_ADDR
	57	#define CONFIG_FEC_MXC_PHYADDR 0x1
	58	#define CONFIG_FEC_XCV_TYPE RMII
	59	#define CONFIG_ETHPRIME "FEC"
	60	#define CONFIG_MII
	61	#endif
	62
	63	/* LCD */
	64	#ifdef CONFIG_VIDEO
	65	#define CONFIG_VIDEO_LOGO
	66	#define CONFIG_SPLASH_SCREEN
	67	#define CONFIG_SPLASH_SCREEN_ALIGN
	68	#define CONFIG_SPLASH_SOURCE
	69	#define CONFIG_VIDEO_BMP_RLE8
	70	#define CONFIG_VIDEO_BMP_LOGO
77f29293 SS	71	#define CONFIG_BMP_16BPP
	72	#define CONFIG_VIDEO_MXS
	73	#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
	74	#endif
	75
	76	/* Environment is stored in the eMMC boot partition */
77f29293 SS	77	#define CONFIG_SYS_MMC_ENV_DEV 0
	78	#define CONFIG_SYS_MMC_ENV_PART 1
	79	#define CONFIG_ENV_SIZE (10 * 1024)
	80	#define CONFIG_ENV_OFFSET (1024 * 1024) /* 1 MB */
	81	#define CONFIG_ENV_OFFSET_REDUND (1536 * 1024) /* 512KB from CONFIG_ENV_OFFSET */
	82
	83	#define CONFIG_ENV_VERSION 100
	84	#define CONFIG_BOARD_NAME opos6ul
	85	#define ACFG_CONSOLE_DEV ttymxc0
	86	#define CONFIG_SYS_AUTOLOAD "no"
	87	#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
77f29293 SS	88	#define CONFIG_PREBOOT "run check_env"
	89	#define CONFIG_BOOTCOMMAND "run emmcboot"
	90
	91	#define CONFIG_EXTRA_ENV_SETTINGS \
	92	"env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \
	93	"consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \
	94	"board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \
	95	"fdt_addr=0x88000000\0" \
	96	"fdt_high=0xffffffff\0" \
	97	"fdt_name=" __stringify(CONFIG_BOARD_NAME) "dev\0" \
	98	"initrd_high=0xffffffff\0" \
	99	"ip_dyn=yes\0" \
	100	"stdin=serial\0" \
	101	"stdout=serial\0" \
	102	"stderr=serial\0" \
	103	"mmcdev=0\0" \
	104	"mmcpart=2\0" \
	105	"mmcroot=/dev/mmcblk0p2 ro\0" \
	106	"mmcrootfstype=ext4 rootwait\0" \
	107	"kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \
	108	"videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
	109	"check_env=if test -n ${flash_env_version}; " \
	110	"then env default env_version; " \
	111	"else env set flash_env_version ${env_version}; env save; " \
	112	"fi; " \
	113	"if itest ${flash_env_version} != ${env_version}; then " \
	114	"echo \"*** Warning - Environment version" \
	115	" change suggests: run flash_reset_env; reset\"; " \
	116	"env default flash_reset_env; " \
	117	"else exit; fi; \0" \
	118	"flash_reset_env=env default -f -a && saveenv && " \
	119	"echo Environment variables erased!\0" \
	120	"download_uboot_spl=tftpboot ${loadaddr} ${board_name}-u-boot.spl\0" \
	121	"flash_uboot_spl=" \
	122	"if mmc dev 0 1; then " \
	123	"setexpr sz ${filesize} / 0x200; " \
	124	"setexpr sz ${sz} + 1; " \
	125	"if mmc write ${loadaddr} 0x2 ${sz}; then " \
	126	"echo Flashing of U-boot SPL succeed; " \
	127	"else echo Flashing of U-boot SPL failed; " \
	128	"fi; " \
	129	"fi;\0" \
	130	"download_uboot_img=tftpboot ${loadaddr} ${board_name}-u-boot.img\0" \
	131	"flash_uboot_img=" \
	132	"if mmc dev 0 1; then " \
	133	"setexpr sz ${filesize} / 0x200; " \
	134	"setexpr sz ${sz} + 1; " \
	135	"if mmc write ${loadaddr} 0x8a ${sz}; then " \
	136	"echo Flashing of U-boot image succeed; " \
	137	"else echo Flashing of U-boot image failed; " \
	138	"fi; " \
	139	"fi;\0" \
	140	"update_uboot=run download_uboot_spl flash_uboot_spl " \
	141	"download_uboot_img flash_uboot_img\0" \
	142	"download_kernel=tftpboot ${loadaddr} ${kernelimg}\0" \
	143	"flash_kernel=" \
	144	"if ext4write mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} ${filesize}; then " \
	145	"echo kernel update succeed; " \
	146	"else echo kernel update failed; " \
	147	"fi;\0" \
	148	"update_kernel=run download_kernel flash_kernel\0" \
	149	"download_dtb=tftpboot ${fdt_addr} imx6ul-${fdt_name}.dtb\0" \
	150	"flash_dtb=" \
	151	"if ext4write mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb ${filesize}; then " \
152	"echo dtb update succeed; " \
153	"else echo dtb update in failed; " \
154	"fi;\0" \
155	"update_dtb=run download_dtb flash_dtb\0" \
156	"download_rootfs=tftpboot ${loadaddr} ${board_name}-rootfs.ext4\0" \
157	"flash_rootfs=" \
158	"if mmc dev 0 0; then " \
159	"setexpr nbblocks ${filesize} / 0x200; " \
160	"setexpr nbblocks ${nbblocks} + 1; " \
161	"if mmc write ${loadaddr} 0x40800 ${nbblocks}; then " \
162	"echo Flashing of rootfs image succeed; " \
163	"else echo Flashing of rootfs image failed; " \
164	"fi; " \
165	"fi;\0" \
166	"update_rootfs=run download_rootfs flash_rootfs\0" \
167	"flash_failsafe=" \
168	"if mmc dev 0 0; then " \
169	"setexpr nbblocks ${filesize} / 0x200; " \
170	"setexpr nbblocks ${nbblocks} + 1; " \
171	"if mmc write ${loadaddr} 0x800 ${nbblocks}; then " \
172	"echo Flashing of rootfs image in failsafe partition succeed; " \
173	"else echo Flashing of rootfs image in failsafe partition failed; " \
174	"fi; " \
175	"fi;\0" \
176	"update_failsafe=run download_rootfs flash_failsafe\0" \
177	"download_userdata=tftpboot ${loadaddr} ${board_name}-user_data.ext4\0" \
178	"flash_userdata=" \
179	"if mmc dev 0 0; then " \
180	"setexpr nbblocks ${filesize} / 0x200; " \
181	"setexpr nbblocks ${nbblocks} + 1; " \
182	"if mmc write ${loadaddr} 0 ${nbblocks}; then " \
183	"echo Flashing of user_data image succeed; " \
184	"else echo Flashing of user_data image failed; " \
185	"fi; " \
186	"fi;\0" \
187	"update_userdata=run download_userdata flash_userdata; mmc rescan\0" \
188	"erase_userdata=" \
189	"if mmc dev 0 0; then " \
190	"echo Erasing eMMC User Data partition, no way out...; " \
191	"mw ${loadaddr} 0 0x200000; " \
192	"mmc write ${loadaddr} 0 0x1000; " \
193	"mmc write ${loadaddr} 0x800 0x1000; " \
194	"mmc write ${loadaddr} 0x40800 0x1000; " \
195	"mmc write ${loadaddr} 0x440800 0x1000; " \
196	"fi;" \
197	"mmc rescan\0" \
198	"update_all=run update_rootfs update_uboot\0" \
199	"initargs=setenv bootargs console=${consoledev},${baudrate} ${extrabootargs}\0" \
200	"addipargs=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
201	"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
202	"addmmcargs=setenv bootargs ${bootargs} root=${mmcroot} " \
203	"rootfstype=${mmcrootfstype}\0" \
204	"emmcboot=run initargs; run addmmcargs; " \
205	"load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} && " \
206	"load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb && " \
207	"bootz ${loadaddr} - ${fdt_addr};\0" \
208	"emmcsafeboot=setenv mmcpart 1; setenv mmcroot /dev/mmcblk0p1 ro; run emmcboot;\0" \
209	"addnfsargs=setenv bootargs ${bootargs} root=/dev/nfs rw " \
210	"nfsroot=${serverip}:${rootpath}\0" \
211	"nfsboot=run initargs; run addnfsargs addipargs; " \
212	"nfs ${loadaddr} ${serverip}:${rootpath}/boot/${kernelimg} && " \
213	"nfs ${fdt_addr} ${serverip}:${rootpath}/boot/imx6ul-${fdt_name}.dtb && " \
214	"bootz ${loadaddr} - ${fdt_addr};\0"
215
216	#endif /* __OPOS6ULDEV_CONFIG_H */