[people/ms/u-boot.git] / include / configs / pcm030.h

/*
 * (C) Copyright 2003-2005
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * (C) Copyright 2006
 * Eric Schumann, Phytec Messatechnik GmbH
 *
 * (C) Copyright 2009
 * Jon Smirl <jonsmirl@gmail.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_BOARDINFO	 "phyCORE-MPC5200B-tiny"

/*-----------------------------------------------------------------------------
High Level Configuration Options
(easy to change)
-----------------------------------------------------------------------------*/
#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
#define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
#define CONFIG_PHYCORE_MPC5200B_TINY 1	/* phyCORE-MPC5200B -> */
					/* FEC configuration and IDE */

/*
 * Valid values for CONFIG_SYS_TEXT_BASE are:
 * 0xFFF00000	boot high (standard configuration)
 * 0xFF000000	boot low
 * 0x00100000	boot from RAM (for testing only)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xFFF00000
#endif

#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */

/*-----------------------------------------------------------------------------
Serial console configuration
-----------------------------------------------------------------------------*/
#define CONFIG_PSC_CONSOLE	3	/* console is on PSC3 -> */
					/*define gps port conf. */
					/* register later on to */
					/*enable UART function! */
#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI

#define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */

#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)	/* Boot low */
#define CONFIG_SYS_LOWBOOT 1
#endif
/* RAMBOOT will be defined automatically in memory section */

#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT 		"nor0=physmap-flash.0"
#define MTDPARTS_DEFAULT   	"mtdparts=physmap-flash.0:256k(ubootl)," \
	"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"

/*-----------------------------------------------------------------------------
Autobooting
-----------------------------------------------------------------------------*/
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow stopping of boot process */
					/* even with bootdelay=0 */
#undef	CONFIG_BOOTARGS


#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
		"mount root filesystem over NFS;" \
	"echo"

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"uimage=uImage-pcm030\0"					\
	"oftree=oftree-pcm030.dtb\0"					\
	"jffs2=root-pcm030.jffs2\0" 					\
	"uboot=u-boot-pcm030.bin\0"					\
	"bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)"	\
		" $(mtdparts) rw\0" 					\
	"bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2"	\
		" rootfstype=jffs2\0" 					\
	"bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs"		\
		" ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::"	\
		"$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
	"bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \
		" tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0"	\
	"bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - "	\
		"0xfff40000\0" 						\
		" cp.b 0x400000 0xff040000 $(filesize)\0" 		\
	"prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \
		"cp.b 0x400000 0xff200000 $(filesize)\0" 		\
	"prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \
		" cp.b 0x400000 0xfff40000 $(filesize)\0" 		\
	"update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \
		" cp.b 0x400000 0xFFF00000 $(filesize)\0"		\
	"unlock=yes\0"							\
	""

#define CONFIG_BOOTCOMMAND		"run bcmd_flash"

/*--------------------------------------------------------------------------
IPB Bus clocking configuration.
 ---------------------------------------------------------------------------*/
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK	/* define for 133MHz speed */

/*-------------------------------------------------------------------------
 * PCI Mapping:
 * 0x40000000 - 0x4fffffff - PCI Memory
 * 0x50000000 - 0x50ffffff - PCI IO Space
 * -----------------------------------------------------------------------*/
#define CONFIG_PCI			1
#define CONFIG_PCI_PNP			1
#define CONFIG_PCI_SCAN_SHOW		1
#define CONFIG_PCI_MEM_BUS		0x40000000
#define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE		0x10000000
#define CONFIG_PCI_IO_BUS		0x50000000
#define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE		0x01000000
#define CONFIG_SYS_XLB_PIPELINING	1

/*---------------------------------------------------------------------------
 I2C configuration
---------------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
#define CONFIG_SYS_I2C_SLAVE 0x7F

/*---------------------------------------------------------------------------
 EEPROM CAT24WC32 configuration
---------------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x52	/* 1010100x */
#define CONFIG_SYS_I2C_FACT_ADDR	0x52	/* EEPROM CAT24WC32 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address */
#define CONFIG_SYS_EEPROM_SIZE		2048
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15

/*---------------------------------------------------------------------------
RTC configuration
---------------------------------------------------------------------------*/
#define RTC
#define CONFIG_RTC_PCF8563		1
#define CONFIG_SYS_I2C_RTC_ADDR		0x51

/*---------------------------------------------------------------------------
 Flash configuration
---------------------------------------------------------------------------*/

#define CONFIG_SYS_FLASH_BASE		0xff000000
#define CONFIG_SYS_FLASH_SIZE		0x01000000
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }

#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
						/* (= chip selects) */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

/*
 * Use also hardware protection. This seems required, as the BDI uses
 * hardware protection. Without this, U-Boot can't work with this sectors,
 * as its protection is software only by default
 */
#define CONFIG_SYS_FLASH_PROTECTION	1

/*---------------------------------------------------------------------------
 Environment settings
---------------------------------------------------------------------------*/

/* pcm030 ships with environment is EEPROM by default */
#define CONFIG_ENV_IS_IN_EEPROM	1
#define CONFIG_ENV_OFFSET	0x00	/* environment starts at the */
					/*beginning of the EEPROM */
#define CONFIG_ENV_SIZE		CONFIG_SYS_EEPROM_SIZE

#define CONFIG_ENV_OVERWRITE	1

/*-----------------------------------------------------------------------------
  Memory map
-----------------------------------------------------------------------------*/
#define CONFIG_SYS_MBAR	0xF0000000	/* MBAR has to be switched by other */
					/* bootloader or debugger config */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_DEFAULT_MBAR		0x80000000
/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE	/* Size of used */
								/* area in DPRAM */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
						GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#	define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

/*-----------------------------------------------------------------------------
 Ethernet configuration
-----------------------------------------------------------------------------*/
#define CONFIG_MPC5xxx_FEC		1
#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR			0x01

/*---------------------------------------------------------------------------
 GPIO configuration
 ---------------------------------------------------------------------------*/

/* GPIO port configuration
 *
 * Pin mapping:
 *
 * [29:31] = 01x
 * PSC1_0 -> AC97 SDATA out
 * PSC1_1 -> AC97 SDTA in
 * PSC1_2 -> AC97 SYNC out
 * PSC1_3 -> AC97 bitclock out
 * PSC1_4 -> AC97 reset out
 *
 * [25:27] = 001
 * PSC2_0 -> CAN 1 Tx out
 * PSC2_1 -> CAN 1 Rx in
 * PSC2_2 -> CAN 2 Tx out
 * PSC2_3 -> CAN 2 Rx in
 * PSC2_4 -> GPIO (claimed for ATA reset, active low)
 *
 *
 * [20:23] = 1100
 * PSC3_0 -> UART Tx out
 * PSC3_1 -> UART Rx in
 * PSC3_2 -> UART RTS (in/out FIXME)
 * PSC3_3 -> UART CTS (in/out FIXME)
 * PSC3_4 -> LocalPlus Bus CS6 \
 * PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5]
 * PSC3_6 -> dedicated SPI MOSI out (master case)
 * PSC3_7 -> dedicated SPI MISO in (master case)
 * PSC3_8 -> dedicated SPI SS out (master case)
 * PSC3_9 -> dedicated SPI CLK out (master case)
 *
 * [18:19] = 01
 * USB_0 -> USB OE out
 * USB_1 -> USB Tx- out
 * USB_2 -> USB Tx+ out
 * USB_3 -> USB RxD (in/out FIXME)
 * USB_4 -> USB Rx+ in
 * USB_5 -> USB Rx- in
 * USB_6 -> USB PortPower out
 * USB_7 -> USB speed out
 * USB_8 -> USB suspend (in/out FIXME)
 * USB_9 -> USB overcurrent in
 *
 * [17] = 0
 * USB differential mode
 *
 * [16] = 0
 * PCI enabled
 *
 * [12:15] = 0101
 * ETH_0 -> ETH Txen
 * ETH_1 -> ETH TxD0
 * ETH_2 -> ETH TxD1
 * ETH_3 -> ETH TxD2
 * ETH_4 -> ETH TxD3
 * ETH_5 -> ETH Txerr
 * ETH_6 -> ETH MDC
 * ETH_7 -> ETH MDIO
 * ETH_8 -> ETH RxDv
 * ETH_9 -> ETH RxCLK
 * ETH_10 -> ETH Collision
 * ETH_11 -> ETH TxD
 * ETH_12 -> ETH RxD0
 * ETH_13 -> ETH RxD1
 * ETH_14 -> ETH RxD2
 * ETH_15 -> ETH RxD3
 * ETH_16 -> ETH Rxerr
 * ETH_17 -> ETH CRS
 *
 * [9:11] = 101
 * PSC6_0 -> UART RxD in
 * PSC6_1 -> UART CTS (in/out FIXME)
 * PSC6_2 -> UART TxD out
 * PSC6_3 -> UART RTS (in/out FIXME)
 *
 * [2:3/6:7] = 00/11
 * TMR_0 -> ATA_CS0 out
 * TMR_1 -> ATA_CS1 out
 * TMR_2 -> GPIO
 * TMR_3 -> GPIO
 * TMR_4 -> GPIO
 * TMR_5 -> GPIO
 * TMR_6 -> GPIO
 * TMR_7 -> GPIO
 * I2C_0 -> I2C 1 Clock out
 * I2C_1 -> I2C 1 IO in/out
 * I2C_2 -> I2C 2 Clock out
 * I2C_3 -> I2C 2 IO in/out
 *
 * [4] = 1
 * PSC3_5 is used as CS7
 *
 * [5] = 1
 * PSC3_4 is used as CS6
 *
 * [1] = 0
 * gpio_wkup_7 is GPIO
 *
 * [0] = 0
 * gpio_wkup_6 is GPIO
 *
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0x0f551c12

/*-----------------------------------------------------------------------------
 Miscellaneous configurable options
-------------------------------------------------------------------------------*/
#define CONFIG_SYS_LONGHELP	/* undef to save memory */
#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */

#define CONFIG_CMDLINE_EDITING 1 /* add command line history */

#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
							/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */

#define CONFIG_DISPLAY_BOARDINFO 1

/*-----------------------------------------------------------------------------
 Various low-level settings
-----------------------------------------------------------------------------*/
#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE

/* no burst access on the LPB */
#define CONFIG_SYS_CS_BURST		0x00000000
/* one deadcycle for the 33MHz statemachine */
#define CONFIG_SYS_CS_DEADCYCLE		0x33333331
/* one additional waitstate for the 33MHz statemachine */
#define CONFIG_SYS_BOOTCS_CFG		0x0001dd00
#define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE

#define CONFIG_SYS_RESET_ADDRESS 	0xff000000

/*-----------------------------------------------------------------------
 * USB stuff
 *-----------------------------------------------------------------------
 */
#define CONFIG_USB_CLOCK		0x0001BBBB
#define CONFIG_USB_CONFIG		0x00001000

/*---------------------------------------------------------------------------
 IDE/ATA stuff Supports IDE harddisk
----------------------------------------------------------------------------*/

#undef  CONFIG_IDE_8xx_PCCARD	/* Use IDE with PC Card Adapter */
#undef	CONFIG_IDE_8xx_DIRECT	/* Direct IDE not supported */
#undef	CONFIG_IDE_LED		/* LED for ide not supported */
#define CONFIG_SYS_ATA_CS_ON_TIMER01
#define	CONFIG_IDE_RESET 1	/* reset for ide supported */
#define CONFIG_IDE_PREINIT
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
/* Offset for data I/O			*/
#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
/* Offset for normal register accesses	*/
#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
/* Offset for alternate registers	*/
#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
/* Interval between registers */
#define CONFIG_SYS_ATA_STRIDE		4
#define CONFIG_ATAPI			1

/* we enable IDE and FAT support, so we also need partition support */
#define CONFIG_DOS_PARTITION 1

/* USB */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1

#define OF_CPU				"PowerPC,5200@0"
#define OF_TBCLK			CONFIG_SYS_MPC5XXX_CLKIN
#define OF_SOC				"soc5200@f0000000"
#define OF_STDOUT_PATH			"/soc5200@f0000000/serial@2400"

#endif /* __CONFIG_H */
Commit	Line	Data
c9969947 JS	1	/*
	2	* (C) Copyright 2003-2005
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* (C) Copyright 2006
	6	* Eric Schumann, Phytec Messatechnik GmbH
	7	*
	8	* (C) Copyright 2009
	9	* Jon Smirl <jonsmirl@gmail.com>
	10	*
3765b3e7	11	* SPDX-License-Identifier: GPL-2.0+
c9969947 JS	12	*/
	13
	14	#ifndef __CONFIG_H
	15	#define __CONFIG_H
	16
	17	#define CONFIG_BOARDINFO "phyCORE-MPC5200B-tiny"
	18
	19	/*-----------------------------------------------------------------------------
	20	High Level Configuration Options
	21	(easy to change)
	22	-----------------------------------------------------------------------------*/
	23	#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
	24	#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
	25	#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */
	26	#define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */
	27	/* FEC configuration and IDE */
2ae18241 WD	28
	29	/*
	30	* Valid values for CONFIG_SYS_TEXT_BASE are:
	31	* 0xFFF00000 boot high (standard configuration)
	32	* 0xFF000000 boot low
	33	* 0x00100000 boot from RAM (for testing only)
	34	*/
	35	#ifndef CONFIG_SYS_TEXT_BASE
	36	#define CONFIG_SYS_TEXT_BASE 0xFFF00000
	37	#endif
	38
c9969947	39	#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
c9969947 JS	40
	41	/*-----------------------------------------------------------------------------
	42	Serial console configuration
	43	-----------------------------------------------------------------------------*/
	44	#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 -> */
	45	/define gps port conf. /
	46	/* register later on to */
	47	/enable UART function! /
	48	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	49	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
	50
	51	/*
	52	* Command line configuration.
	53	*/
	54	#include <config_cmd_default.h>
	55
	56	#define CONFIG_CMD_DATE
	57	#define CONFIG_CMD_DHCP
	58	#define CONFIG_CMD_EEPROM
	59	#define CONFIG_CMD_I2C
	60	#define CONFIG_CMD_JFFS2
	61	#define CONFIG_CMD_MII
	62	#define CONFIG_CMD_NFS
	63	#define CONFIG_CMD_PCI
	64
	65	#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
	66
14d0a02a	67	#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low */
c9969947 JS	68	#define CONFIG_SYS_LOWBOOT 1
	69	#endif
	70	/* RAMBOOT will be defined automatically in memory section */
	71
	72	#define CONFIG_JFFS2_CMDLINE
	73	#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
	74	#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \
	75	"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
	76
	77	/*-----------------------------------------------------------------------------
	78	Autobooting
	79	-----------------------------------------------------------------------------*/
	80	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	81	#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */
	82	/* even with bootdelay=0 */
	83	#undef CONFIG_BOOTARGS
	84
	85
	86	#define CONFIG_PREBOOT "echo;" \
	87	"echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
	88	"mount root filesystem over NFS;" \
	89	"echo"
	90
	91	#define CONFIG_EXTRA_ENV_SETTINGS \
	92	"netdev=eth0\0" \
	93	"uimage=uImage-pcm030\0" \
	94	"oftree=oftree-pcm030.dtb\0" \
	95	"jffs2=root-pcm030.jffs2\0" \
	96	"uboot=u-boot-pcm030.bin\0" \
	97	"bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)" \
	98	" $(mtdparts) rw\0" \
	99	"bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2" \
	100	" rootfstype=jffs2\0" \
	101	"bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs" \
	102	" ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::" \
	103	"$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
	104	"bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \
	105	" tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \
	106	"bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - " \
	107	"0xfff40000\0" \
	108	" cp.b 0x400000 0xff040000 $(filesize)\0" \
	109	"prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \
	110	"cp.b 0x400000 0xff200000 $(filesize)\0" \
	111	"prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \
	112	" cp.b 0x400000 0xfff40000 $(filesize)\0" \
	113	"update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \
	114	" cp.b 0x400000 0xFFF00000 $(filesize)\0" \
	115	"unlock=yes\0" \
	116	""
	117
	118	#define CONFIG_BOOTCOMMAND "run bcmd_flash"
	119
	120	/*--------------------------------------------------------------------------
	121	IPB Bus clocking configuration.
	122	---------------------------------------------------------------------------*/
	123	#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
	124
	125	/*-------------------------------------------------------------------------
	126	* PCI Mapping:
	127	* 0x40000000 - 0x4fffffff - PCI Memory
	128	* 0x50000000 - 0x50ffffff - PCI IO Space
	129	* -----------------------------------------------------------------------*/
	130	#define CONFIG_PCI 1
	131	#define CONFIG_PCI_PNP 1
132	#define CONFIG_PCI_SCAN_SHOW 1
133	#define CONFIG_PCI_MEM_BUS 0x40000000
134	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
135	#define CONFIG_PCI_MEM_SIZE 0x10000000
136	#define CONFIG_PCI_IO_BUS 0x50000000
137	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
138	#define CONFIG_PCI_IO_SIZE 0x01000000
139	#define CONFIG_SYS_XLB_PIPELINING 1
140
141	/*---------------------------------------------------------------------------
142	I2C configuration
143	---------------------------------------------------------------------------*/
144	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
145	#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
146	#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
147	#define CONFIG_SYS_I2C_SLAVE 0x7F
148
149	/*---------------------------------------------------------------------------
150	EEPROM CAT24WC32 configuration
151	---------------------------------------------------------------------------*/
152	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */
153	#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */
154	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
155	#define CONFIG_SYS_EEPROM_SIZE 2048
156	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
157	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
158
159	/*---------------------------------------------------------------------------
160	RTC configuration
161	---------------------------------------------------------------------------*/
162	#define RTC
163	#define CONFIG_RTC_PCF8563 1
164	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
165
166	/*---------------------------------------------------------------------------
167	Flash configuration
168	---------------------------------------------------------------------------*/
169
170	#define CONFIG_SYS_FLASH_BASE 0xff000000
171	#define CONFIG_SYS_FLASH_SIZE 0x01000000
172	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
173
174	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
175	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
176	#define CONFIG_SYS_FLASH_EMPTY_INFO
177	#define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */
178	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
179	/* (= chip selects) */
180	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
181
182	/*
183	* Use also hardware protection. This seems required, as the BDI uses
184	* hardware protection. Without this, U-Boot can't work with this sectors,
185	* as its protection is software only by default
186	*/
187	#define CONFIG_SYS_FLASH_PROTECTION 1
188
189	/*---------------------------------------------------------------------------
190	Environment settings
191	---------------------------------------------------------------------------*/
192
193	/* pcm030 ships with environment is EEPROM by default */
194	#define CONFIG_ENV_IS_IN_EEPROM 1
195	#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */
196	/beginning of the EEPROM /
197	#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE
198
199	#define CONFIG_ENV_OVERWRITE 1
200
201	/*-----------------------------------------------------------------------------
202	Memory map
203	-----------------------------------------------------------------------------*/
204	#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */
205	/* bootloader or debugger config */
206	#define CONFIG_SYS_SDRAM_BASE 0x00000000
207	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
208	/* Use SRAM until RAM will be available */
209	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
553f0982	210	#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used */
c9969947	211	/* area in DPRAM */
553f0982	212	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
25ddd1fb	213	GENERATED_GBL_DATA_SIZE)
c9969947 JS	214	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
c9969947 JS	215
14d0a02a	216	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
c9969947 JS	217	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	218	# define CONFIG_SYS_RAMBOOT 1
	219	#endif
	220
	221	#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	222	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	223	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	224
	225	/*-----------------------------------------------------------------------------
	226	Ethernet configuration
	227	-----------------------------------------------------------------------------*/
	228	#define CONFIG_MPC5xxx_FEC 1
	229	#define CONFIG_MPC5xxx_FEC_MII100
	230	#define CONFIG_PHY_ADDR 0x01
	231
	232	/*---------------------------------------------------------------------------
	233	GPIO configuration
	234	---------------------------------------------------------------------------*/
	235
	236	/* GPIO port configuration
	237	*
	238	* Pin mapping:
	239	*
	240	* [29:31] = 01x
	241	* PSC1_0 -> AC97 SDATA out
	242	* PSC1_1 -> AC97 SDTA in
	243	* PSC1_2 -> AC97 SYNC out
	244	* PSC1_3 -> AC97 bitclock out
	245	* PSC1_4 -> AC97 reset out
	246	*
	247	* [25:27] = 001
	248	* PSC2_0 -> CAN 1 Tx out
	249	* PSC2_1 -> CAN 1 Rx in
	250	* PSC2_2 -> CAN 2 Tx out
	251	* PSC2_3 -> CAN 2 Rx in
	252	* PSC2_4 -> GPIO (claimed for ATA reset, active low)
	253	*
	254	*
	255	* [20:23] = 1100
	256	* PSC3_0 -> UART Tx out
	257	* PSC3_1 -> UART Rx in
	258	* PSC3_2 -> UART RTS (in/out FIXME)
	259	* PSC3_3 -> UART CTS (in/out FIXME)
	260	* PSC3_4 -> LocalPlus Bus CS6 \
	261	* PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5]
	262	* PSC3_6 -> dedicated SPI MOSI out (master case)
	263	* PSC3_7 -> dedicated SPI MISO in (master case)
	264	* PSC3_8 -> dedicated SPI SS out (master case)
	265	* PSC3_9 -> dedicated SPI CLK out (master case)
	266	*
	267	* [18:19] = 01
	268	* USB_0 -> USB OE out
	269	* USB_1 -> USB Tx- out
	270	* USB_2 -> USB Tx+ out
	271	* USB_3 -> USB RxD (in/out FIXME)
	272	* USB_4 -> USB Rx+ in
	273	* USB_5 -> USB Rx- in
	274	* USB_6 -> USB PortPower out
	275	* USB_7 -> USB speed out
	276	* USB_8 -> USB suspend (in/out FIXME)
	277	* USB_9 -> USB overcurrent in
	278	*
	279	* [17] = 0
	280	* USB differential mode
281	*
282	* [16] = 0
283	* PCI enabled
284	*
285	* [12:15] = 0101
286	* ETH_0 -> ETH Txen
287	* ETH_1 -> ETH TxD0
288	* ETH_2 -> ETH TxD1
289	* ETH_3 -> ETH TxD2
290	* ETH_4 -> ETH TxD3
291	* ETH_5 -> ETH Txerr
292	* ETH_6 -> ETH MDC
293	* ETH_7 -> ETH MDIO
294	* ETH_8 -> ETH RxDv
295	* ETH_9 -> ETH RxCLK
296	* ETH_10 -> ETH Collision
297	* ETH_11 -> ETH TxD
298	* ETH_12 -> ETH RxD0
299	* ETH_13 -> ETH RxD1
300	* ETH_14 -> ETH RxD2
301	* ETH_15 -> ETH RxD3
302	* ETH_16 -> ETH Rxerr
303	* ETH_17 -> ETH CRS
304	*
305	* [9:11] = 101
306	* PSC6_0 -> UART RxD in
307	* PSC6_1 -> UART CTS (in/out FIXME)
308	* PSC6_2 -> UART TxD out
309	* PSC6_3 -> UART RTS (in/out FIXME)
310	*
311	* [2:3/6:7] = 00/11
312	* TMR_0 -> ATA_CS0 out
313	* TMR_1 -> ATA_CS1 out
314	* TMR_2 -> GPIO
315	* TMR_3 -> GPIO
316	* TMR_4 -> GPIO
317	* TMR_5 -> GPIO
318	* TMR_6 -> GPIO
319	* TMR_7 -> GPIO
320	* I2C_0 -> I2C 1 Clock out
321	* I2C_1 -> I2C 1 IO in/out
322	* I2C_2 -> I2C 2 Clock out
323	* I2C_3 -> I2C 2 IO in/out
324	*
325	* [4] = 1
326	* PSC3_5 is used as CS7
327	*
328	* [5] = 1
329	* PSC3_4 is used as CS6
330	*
331	* [1] = 0
332	* gpio_wkup_7 is GPIO
333	*
334	* [0] = 0
335	* gpio_wkup_6 is GPIO
336	*
337	*/
338	#define CONFIG_SYS_GPS_PORT_CONFIG 0x0f551c12
339
340	/*-----------------------------------------------------------------------------
341	Miscellaneous configurable options
342	-------------------------------------------------------------------------------*/
343	#define CONFIG_SYS_LONGHELP /* undef to save memory */
344	#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
345
346	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
347
348	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
349	#if defined(CONFIG_CMD_KGDB)
350	#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
351	#endif
352
353	#if defined(CONFIG_CMD_KGDB)
354	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
355	#else
356	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
357	#endif
358	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
359	/* Print Buffer Size */
360	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
361	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
362
363	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
364	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
365
366	#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
c9969947 JS	367
	368	#define CONFIG_DISPLAY_BOARDINFO 1
	369
	370	/*-----------------------------------------------------------------------------
	371	Various low-level settings
	372	-----------------------------------------------------------------------------*/
	373	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
	374	#define CONFIG_SYS_HID0_FINAL HID0_ICE
	375
	376	/* no burst access on the LPB */
	377	#define CONFIG_SYS_CS_BURST 0x00000000
	378	/* one deadcycle for the 33MHz statemachine */
	379	#define CONFIG_SYS_CS_DEADCYCLE 0x33333331
	380	/* one additional waitstate for the 33MHz statemachine */
	381	#define CONFIG_SYS_BOOTCS_CFG 0x0001dd00
	382	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	383	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	384
	385	#define CONFIG_SYS_RESET_ADDRESS 0xff000000
	386
	387	/*-----------------------------------------------------------------------
	388	* USB stuff
	389	*-----------------------------------------------------------------------
	390	*/
	391	#define CONFIG_USB_CLOCK 0x0001BBBB
	392	#define CONFIG_USB_CONFIG 0x00001000
	393
	394	/*---------------------------------------------------------------------------
	395	IDE/ATA stuff Supports IDE harddisk
	396	----------------------------------------------------------------------------*/
	397
	398	#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
	399	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	400	#undef CONFIG_IDE_LED /* LED for ide not supported */
	401	#define CONFIG_SYS_ATA_CS_ON_TIMER01
	402	#define CONFIG_IDE_RESET 1 /* reset for ide supported */
	403	#define CONFIG_IDE_PREINIT
	404	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
	405	#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
	406	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
	407	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
	408	/* Offset for data I/O */
	409	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
	410	/* Offset for normal register accesses */
	411	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
	412	/* Offset for alternate registers */
	413	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
	414	/* Interval between registers */
	415	#define CONFIG_SYS_ATA_STRIDE 4
	416	#define CONFIG_ATAPI 1
	417
	418	/* we enable IDE and FAT support, so we also need partition support */
	419	#define CONFIG_DOS_PARTITION 1
	420
	421	/* USB */
	422	#define CONFIG_USB_OHCI
	423	#define CONFIG_USB_STORAGE
	424
	425	/* pass open firmware flat tree */
	426	#define CONFIG_OF_LIBFDT 1
	427	#define CONFIG_OF_BOARD_SETUP 1
	428
	429	#define OF_CPU "PowerPC,5200@0"
	430	#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN
431	#define OF_SOC "soc5200@f0000000"
432	#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2400"
433
434	#endif /* __CONFIG_H */