[people/ms/u-boot.git] / include / configs / pfla02.h

/*
 * Copyright (C) Stefano Babic <sbabic@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */


#ifndef __PCM058_CONFIG_H
#define __PCM058_CONFIG_H

#ifdef CONFIG_SPL
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#include "imx6_spl.h"
#endif

#include "mx6_common.h"

/* Thermal */
#define CONFIG_IMX_THERMAL

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART4_BASE
#define CONSOLE_DEV		"ttymxc3"

/* Early setup */
#define CONFIG_DISPLAY_BOARDINFO_LATE


/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(8 * SZ_1M)

/* Ethernet */
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		3

/* SPI Flash */
#define CONFIG_SF_DEFAULT_BUS		2
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 0 */
#define CONFIG_SYS_I2C_SPEED		  100000

#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_NAND
/* Enable NAND support */
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#endif

/* DMA stuff, needed for GPMI/MXS NAND support */

/* Filesystem support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE

/* Various command support */

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* Environment organization */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE                (16 * 1024)
#define CONFIG_ENV_OFFSET		(1024 * SZ_1K)
#define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
						CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET              (0x1E0000)
#define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
#endif

/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"addcons=setenv bootargs ${bootargs} "				\
		"console=${console},${baudrate}\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
		"${netmask}:${hostname}:${netdev}:off\0"		\
	"addmisc=setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addmtd=run mtdnand;run mtdspi;"				\
		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"mtdnand=setenv mtdparts mtdparts=gpmi-nand:"			\
		"40m(Kernels),400m(root),-(nand)\0"			\
	"mtdspi=setenv mtdparts ${mtdparts}"				\
		"';spi2.0:1024k(bootloader),"				\
			"64k(env1),64k(env2),-(rescue)'\0"		\
	"bootcmd=if test -n ${rescue};"					\
		"then run swupdate;fi;run nandboot;run swupdate\0"	\
	"bootfile=uImage\0"						\
	"bootimage=uImage\0"						\
	"console=ttymxc3\0"						\
	"fdt_addr_r=0x18000000\0"					\
	"fdt_file=pfla02.dtb\0"						\
	"fdt_high=0xffffffff\0"						\
	"initrd_high=0xffffffff\0"					\
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"		\
	"miscargs=panic=1 quiet\0"					\
	"mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0"		\
	"mmcboot=if run mmcload;then "					\
		"run mmcargs addcons addmisc;"				\
			"bootm;fi\0"					\
	"mmcload=mmc rescan;"						\
		"load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
	"mmcpart=1\0"							\
	"mmcroot=/dev/mmcblk0p1\0"					\
	"ubiroot=1\0"							\
	"nandargs=setenv bootargs ubi.mtd=1 "				\
		"root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0"		\
	"nandboot=run mtdnand;ubi part nand0,0;"			\
		"ubi readvol ${kernel_addr_r} kernel${ubiroot};"	\
		"run nandargs addip addcons addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};"	\
		"tftp ${fdt_addr_r} ${board_name}/${fdt_file};"		\
		"run nfsargs addip addcons addmtd addmisc;"		\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};"	\
		"run nfsargs addip addcons addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"nfsargs=setenv bootargs root=/dev/nfs"				\
		" nfsroot=${serverip}:${nfsroot},v3 panic=1\0"		\
	"swupdate=setenv bootargs root=/dev/ram;"			\
		"run addip addcons addmtd addmisc;"			\
		"sf probe;"						\
		"sf read ${kernel_addr_r} 120000 600000;"		\
		"sf read 14000000 730000 800000;"			\
		"bootm ${kernel_addr_r} 14000000\0"

#endif
Commit	Line	Data
83605d37 SB	1	/*
	2	* Copyright (C) Stefano Babic <sbabic@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7
	8	#ifndef __PCM058_CONFIG_H
	9	#define __PCM058_CONFIG_H
	10
83605d37 SB	11	#ifdef CONFIG_SPL
	12	#define CONFIG_SPL_SPI_LOAD
	13	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
	14	#include "imx6_spl.h"
	15	#endif
	16
	17	#include "mx6_common.h"
	18
	19	/* Thermal */
	20	#define CONFIG_IMX_THERMAL
	21
	22	/* Serial */
	23	#define CONFIG_MXC_UART
	24	#define CONFIG_MXC_UART_BASE UART4_BASE
	25	#define CONSOLE_DEV "ttymxc3"
	26
	27	/* Early setup */
	28	#define CONFIG_DISPLAY_BOARDINFO_LATE
	29
	30
	31	/* Size of malloc() pool */
	32	#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M)
	33
	34	/* Ethernet */
83605d37 SB	35	#define CONFIG_MII
	36	#define IMX_FEC_BASE ENET_BASE_ADDR
	37	#define CONFIG_FEC_XCV_TYPE RGMII
	38	#define CONFIG_ETHPRIME "FEC"
	39	#define CONFIG_FEC_MXC_PHYADDR 3
	40
83605d37	41	/* SPI Flash */
83605d37 SB	42	#define CONFIG_SF_DEFAULT_BUS 2
	43	#define CONFIG_SF_DEFAULT_CS 0
	44	#define CONFIG_SF_DEFAULT_SPEED 20000000
	45	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	46
	47	/* I2C Configs */
	48	#define CONFIG_SYS_I2C
	49	#define CONFIG_SYS_I2C_MXC
	50	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */
	51	#define CONFIG_SYS_I2C_SPEED 100000
	52
	53	#ifndef CONFIG_SPL_BUILD
	54	#define CONFIG_CMD_NAND
	55	/* Enable NAND support */
	56	#define CONFIG_CMD_NAND_TRIMFFS
83605d37 SB	57	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	58	#define CONFIG_SYS_NAND_BASE 0x40000000
	59	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	60	#define CONFIG_SYS_NAND_ONFI_DETECTION
	61	#endif
	62
	63	/* DMA stuff, needed for GPMI/MXS NAND support */
83605d37 SB	64
	65	/* Filesystem support */
	66	#define CONFIG_MTD_PARTITIONS
	67	#define CONFIG_MTD_DEVICE
83605d37 SB	68
	69	/* Various command support */
	70
	71	/* Physical Memory Map */
	72	#define CONFIG_NR_DRAM_BANKS 1
	73	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	74
	75	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	76	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	77	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	78
	79	#define CONFIG_SYS_INIT_SP_OFFSET \
	80	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	81	#define CONFIG_SYS_INIT_SP_ADDR \
	82	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	83
	84	/* MMC Configs */
	85	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	86	#define CONFIG_SYS_FSL_USDHC_NUM 2
	87
	88	/* Environment organization */
	89	#define CONFIG_ENV_IS_IN_SPI_FLASH
	90	#define CONFIG_ENV_SIZE (16 * 1024)
	91	#define CONFIG_ENV_OFFSET (1024 * SZ_1K)
	92	#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
	93	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	94	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	95	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	96	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	97	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	98	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
	99	CONFIG_ENV_SECT_SIZE)
	100	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	101
	102	#ifdef CONFIG_ENV_IS_IN_NAND
	103	#define CONFIG_ENV_OFFSET (0x1E0000)
	104	#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
	105	#endif
	106
	107	/* Default environment */
	108	#define CONFIG_EXTRA_ENV_SETTINGS \
	109	"addcons=setenv bootargs ${bootargs} " \
	110	"console=${console},${baudrate}\0" \
	111	"addip=setenv bootargs ${bootargs} " \
	112	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	113	"${netmask}:${hostname}:${netdev}:off\0" \
	114	"addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \
	115	"addmtd=run mtdnand;run mtdspi;" \
	116	"setenv bootargs ${bootargs} ${mtdparts}\0" \
	117	"mtdnand=setenv mtdparts mtdparts=gpmi-nand:" \
	118	"40m(Kernels),400m(root),-(nand)\0" \
	119	"mtdspi=setenv mtdparts ${mtdparts}" \
	120	"';spi2.0:1024k(bootloader)," \
	121	"64k(env1),64k(env2),-(rescue)'\0" \
	122	"bootcmd=if test -n ${rescue};" \
	123	"then run swupdate;fi;run nandboot;run swupdate\0" \
	124	"bootfile=uImage\0" \
	125	"bootimage=uImage\0" \
	126	"console=ttymxc3\0" \
	127	"fdt_addr_r=0x18000000\0" \
	128	"fdt_file=pfla02.dtb\0" \
	129	"fdt_high=0xffffffff\0" \
	130	"initrd_high=0xffffffff\0" \
	131	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
132	"miscargs=panic=1 quiet\0" \
133	"mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \
134	"mmcboot=if run mmcload;then " \
135	"run mmcargs addcons addmisc;" \
136	"bootm;fi\0" \
137	"mmcload=mmc rescan;" \
138	"load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
139	"mmcpart=1\0" \
140	"mmcroot=/dev/mmcblk0p1\0" \
141	"ubiroot=1\0" \
142	"nandargs=setenv bootargs ubi.mtd=1 " \
143	"root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0" \
144	"nandboot=run mtdnand;ubi part nand0,0;" \
145	"ubi readvol ${kernel_addr_r} kernel${ubiroot};" \
146	"run nandargs addip addcons addmtd addmisc;" \
147	"bootm ${kernel_addr_r}\0" \
148	"net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \
149	"tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \
150	"run nfsargs addip addcons addmtd addmisc;" \
151	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
152	"net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};" \
153	"run nfsargs addip addcons addmtd addmisc;" \
154	"bootm ${kernel_addr_r}\0" \
155	"nfsargs=setenv bootargs root=/dev/nfs" \
156	" nfsroot=${serverip}:${nfsroot},v3 panic=1\0" \
157	"swupdate=setenv bootargs root=/dev/ram;" \
158	"run addip addcons addmtd addmisc;" \
159	"sf probe;" \
160	"sf read ${kernel_addr_r} 120000 600000;" \
161	"sf read 14000000 730000 800000;" \
162	"bootm ${kernel_addr_r} 14000000\0"
163
164	#endif