]>
Commit | Line | Data |
---|---|---|
bfc37f3c EL |
1 | /* |
2 | * Configuration settings for the mini-box PICOSAM9G45 board. | |
3 | * (C) Copyright 2015 Inter Act B.V. | |
4 | * | |
5 | * Based on: | |
6 | * U-Boot file: include/configs/at91sam9m10g45ek.h | |
7 | * (C) Copyright 2007-2008 | |
8 | * Stelian Pop <stelian@popies.net> | |
9 | * Lead Tech Design <www.leadtechdesign.com> | |
10 | * | |
11 | * SPDX-License-Identifier: GPL-2.0+ | |
12 | */ | |
13 | ||
14 | #ifndef __CONFIG_H | |
15 | #define __CONFIG_H | |
16 | ||
17 | #include <asm/hardware.h> | |
18 | ||
bfc37f3c EL |
19 | #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ |
20 | ||
21 | /* ARM asynchronous clock */ | |
22 | #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 | |
23 | #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ | |
24 | ||
25 | #define CONFIG_PICOSAM | |
26 | ||
27 | #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ | |
28 | #define CONFIG_SETUP_MEMORY_TAGS | |
29 | #define CONFIG_INITRD_TAG | |
30 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
bfc37f3c | 31 | |
bfc37f3c EL |
32 | /* general purpose I/O */ |
33 | #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ | |
34 | #define CONFIG_AT91_GPIO | |
35 | #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ | |
36 | ||
37 | /* serial console */ | |
38 | #define CONFIG_ATMEL_USART | |
39 | #define CONFIG_USART_BASE ATMEL_BASE_DBGU | |
40 | #define CONFIG_USART_ID ATMEL_ID_SYS | |
41 | ||
42 | /* LCD */ | |
bfc37f3c EL |
43 | #define LCD_BPP LCD_COLOR8 |
44 | #define CONFIG_LCD_LOGO | |
45 | #undef LCD_TEST_PATTERN | |
46 | #define CONFIG_LCD_INFO | |
47 | #define CONFIG_LCD_INFO_BELOW_LOGO | |
bfc37f3c EL |
48 | #define CONFIG_ATMEL_LCD |
49 | #define CONFIG_ATMEL_LCD_RGB565 | |
bfc37f3c EL |
50 | /* board specific(not enough SRAM) */ |
51 | #define CONFIG_AT91SAM9G45_LCD_BASE 0x23E00000 | |
52 | ||
53 | /* LED */ | |
54 | #define CONFIG_AT91_LED | |
55 | #define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */ | |
56 | ||
bfc37f3c EL |
57 | |
58 | /* | |
59 | * BOOTP options | |
60 | */ | |
61 | #define CONFIG_BOOTP_BOOTFILESIZE | |
bfc37f3c EL |
62 | |
63 | /* Enable the watchdog */ | |
64 | #define CONFIG_AT91SAM9_WATCHDOG | |
65 | #define CONFIG_HW_WATCHDOG | |
66 | ||
67 | /* | |
68 | * Command line configuration. | |
69 | */ | |
70 | ||
bfc37f3c EL |
71 | /* SDRAM */ |
72 | #define CONFIG_NR_DRAM_BANKS 2 | |
73 | #define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ | |
74 | #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ | |
75 | #define PHYS_SDRAM_2 ATMEL_BASE_CS6 /* on DDRSDRC0 */ | |
76 | #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ | |
77 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 | |
78 | ||
79 | #define CONFIG_SYS_INIT_SP_ADDR \ | |
80 | (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) | |
81 | ||
82 | /* MMC */ | |
bfc37f3c EL |
83 | |
84 | #ifdef CONFIG_CMD_MMC | |
bfc37f3c EL |
85 | #define CONFIG_GENERIC_ATMEL_MCI |
86 | #endif | |
87 | ||
bfc37f3c EL |
88 | /* Ethernet */ |
89 | #define CONFIG_MACB | |
90 | #define CONFIG_RMII | |
91 | #define CONFIG_NET_RETRY_COUNT 20 | |
92 | #define CONFIG_RESET_PHY_R | |
93 | #define CONFIG_AT91_WANTS_COMMON_PHY | |
94 | ||
bfc37f3c EL |
95 | #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ |
96 | ||
97 | #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE | |
98 | #define CONFIG_SYS_MEMTEST_END 0x23e00000 | |
99 | ||
100 | #ifdef CONFIG_SYS_USE_MMC | |
101 | /* bootstrap + u-boot + env + linux in mmc */ | |
bfc37f3c EL |
102 | #define CONFIG_ENV_SIZE 0x4000 |
103 | ||
bfc37f3c EL |
104 | #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ |
105 | "fatload mmc 0:1 0x22000000 zImage; " \ | |
106 | "bootz 0x22000000 - 0x21000000" | |
107 | #endif | |
108 | ||
bfc37f3c EL |
109 | /* |
110 | * Size of malloc() pool | |
111 | */ | |
112 | #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) | |
113 | ||
114 | /* Defines for SPL */ | |
bfc37f3c EL |
115 | #define CONFIG_SPL_TEXT_BASE 0x300000 |
116 | #define CONFIG_SPL_MAX_SIZE 0x010000 | |
117 | #define CONFIG_SPL_STACK 0x310000 | |
118 | ||
bfc37f3c EL |
119 | #define CONFIG_SYS_MONITOR_LEN 0x80000 |
120 | ||
121 | #ifdef CONFIG_SYS_USE_MMC | |
122 | ||
123 | #define CONFIG_SPL_BSS_START_ADDR 0x20000000 | |
124 | #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 | |
125 | #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 | |
126 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 | |
127 | ||
bfc37f3c EL |
128 | #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |
129 | #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" | |
bfc37f3c EL |
130 | |
131 | #define CONFIG_SPL_ATMEL_SIZE | |
132 | #define CONFIG_SYS_MASTER_CLOCK 132096000 | |
133 | #define CONFIG_SYS_AT91_PLLA 0x20c73f03 | |
134 | #define CONFIG_SYS_MCKR 0x1301 | |
135 | #define CONFIG_SYS_MCKR_CSS 0x1302 | |
136 | ||
137 | #endif | |
138 | #endif |