[people/ms/u-boot.git] / include / configs / platinum.h

/*
 * Copyright (C) 2014, Barco (www.barco.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __PLATINUM_CONFIG_H__
#define __PLATINUM_CONFIG_H__

/* SPL */

/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"

/*
 * Hardware configuration
 */

/* UART config */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE			UART1_BASE

/* I2C config */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED			100000

/* MMC config */
#define CONFIG_SYS_FSL_ESDHC_ADDR		0
#define CONFIG_SYS_FSL_USDHC_NUM		1

/* Ethernet config */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE				ENET_BASE_ADDR

/* USB config */
#define CONFIG_MXC_USB_PORT			1
#define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS			0

/* Memory config */
#define CONFIG_NR_DRAM_BANKS			1
#define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
#ifndef PHYS_SDRAM_SIZE
#define PHYS_SDRAM_SIZE				(1024 << 20)
#endif

#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
						 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
						 CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)

#ifdef CONFIG_CMD_NAND

/* NAND config */
#define CONFIG_NAND_MXS
#ifndef CONFIG_SYS_NAND_MAX_CHIPS
#define CONFIG_SYS_NAND_MAX_CHIPS		2
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA config, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Environment in NAND */
#define CONFIG_ENV_OFFSET		(16 << 20)
#define CONFIG_ENV_SECT_SIZE		(128 << 10)
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#else /* CONFIG_CMD_NAND */

/* Environment in MMC */
#define CONFIG_ENV_SIZE			(8 << 10)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif /* CONFIG_CMD_NAND */

/*
 * U-Boot configuration
 */

/* Board startup config */
#define CONFIG_MISC_INIT_R

#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
						 PHYS_SDRAM_SIZE - (12 << 20))

#define CONFIG_BOOTCOMMAND			"run bootubi_scr"

/* Miscellaneous configurable options */
#define CONFIG_PREBOOT

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
						 sizeof(CONFIG_SYS_PROMPT) + 16)

/* MTD/UBI/UBIFS config */
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),-(ubi)"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),495M(ubi0)," \
				"14M(res0),2M(res1)," \
				"512k(res2),512k(res3),-(ubi1)"
#endif

/*
 * Environment configuration
 */

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi\0"			\
	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
	"setubirfs=env set ubirfs ubi0:rootfs\0"
#endif

#define CONFIG_COMMON_ENV_MISC						\
	"user=user\0"							\
	"project="CONFIG_PLATINUM_PROJECT"\0"				\
	"uimage=uImage\0"						\
	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
	"serverip=serverip\0"						\
	"memaddrlinux=0x10800000\0"					\
	"memaddrsrc=0x11000000\0"					\
	"memaddrdtb=0x12000000\0"					\
	"console=ttymxc0\0"						\
	"baudrate=115200\0"						\
	"boot_scr=boot.uboot\0"						\
	"boot_vol=0\0"							\
	"mtdids="MTDIDS_DEFAULT"\0"					\
	"mtdparts="MTDPARTS_DEFAULT"\0"					\
	"mmcfs=ext2\0"							\
	"mmcrootpart=1\0"						\
	\
	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
	\
	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
		"$mmcfilelinux\0"					\
	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
		"$mmcfiledtb\0"						\
	\
	"ubipart=ubi part $ubipartition\0"				\
	"ubimount=ubifsmount $ubirfs\0"					\
	\
	"setbootargscommon=env set bootargs $bootargs "			\
		"console=$console,$baudrate enable_wait_mode=off\0"	\
	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
	"setbootargsubirfs=env set bootargs $bootargs "			\
		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
	"setbootargsmmcrfs=env set bootargs $bootargs "			\
		"root=$mmcrootdev rootwait rw\0"			\
	\
	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
			"setbootargsnfsrfs;"				\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
			"run setubipartition setubirfs;"		\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi=run setubipartition setubirfs setubifilelinux "	\
				"setubipfiledtb;"			\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run ubipart ubimount loadubikernel loadubidtb;" \
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi_scr=run setubipartition setubirfs;"			\
			"run ubipart ubimount;"				\
			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
			"then source ${memaddrsrc}; else run bootubi; fi\0" \
	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
			"setbootargscommon setbootargsmmcrfs;"		\
			"run loadmmckernel loadmmcdtb;"			\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	\
	"bootcmd="CONFIG_BOOTCOMMAND"\0"

#define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
							CONFIG_COMMON_ENV_UBI
#endif /* __PLATINUM_CONFIG_H__ */
Commit	Line	Data
5d6050fd SR	1	/*
	2	* Copyright (C) 2014, Barco (www.barco.com)
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __PLATINUM_CONFIG_H__
	8	#define __PLATINUM_CONFIG_H__
	9
5d6050fd	10	/* SPL */
5d6050fd SR	11
	12	/* Location in NAND to read U-Boot from */
	13	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
	14
	15	#include "imx6_spl.h" /* common IMX6 SPL configuration */
	16	#include "mx6_common.h"
5d6050fd	17
5d6050fd SR	18	/*
	19	* Hardware configuration
	20	*/
	21
5d6050fd SR	22	/* UART config */
	23	#define CONFIG_MXC_UART
	24	#define CONFIG_MXC_UART_BASE UART1_BASE
5d6050fd SR	25
	26	/* I2C config */
	27	#define CONFIG_SYS_I2C
	28	#define CONFIG_SYS_I2C_MXC
03544c66 AA	29	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	30	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	31	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
5d6050fd SR	32	#define CONFIG_SYS_I2C_SPEED 100000
	33
	34	/* MMC config */
5d6050fd SR	35	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
5d6050fd SR	36	#define CONFIG_SYS_FSL_USDHC_NUM 1
5d6050fd SR	37
	38	/* Ethernet config */
	39	#define CONFIG_FEC_MXC
	40	#define CONFIG_MII
	41	#define IMX_FEC_BASE ENET_BASE_ADDR
	42
5d6050fd	43	/* USB config */
5d6050fd SR	44	#define CONFIG_MXC_USB_PORT 1
	45	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	46	#define CONFIG_MXC_USB_FLAGS 0
	47
	48	/* Memory config */
	49	#define CONFIG_NR_DRAM_BANKS 1
	50	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	51	#ifndef PHYS_SDRAM_SIZE
	52	#define PHYS_SDRAM_SIZE (1024 << 20)
	53	#endif
	54
	55	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	56	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	57	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	58
	59	#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	60	GENERATED_GBL_DATA_SIZE)
	61	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	62	CONFIG_SYS_INIT_SP_OFFSET)
	63
	64	#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
	65
5d6050fd SR	66	#ifdef CONFIG_CMD_NAND
	67
	68	/* NAND config */
	69	#define CONFIG_NAND_MXS
	70	#ifndef CONFIG_SYS_NAND_MAX_CHIPS
	71	#define CONFIG_SYS_NAND_MAX_CHIPS 2
	72	#endif
	73	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	74	#define CONFIG_SYS_NAND_BASE 0x40000000
	75	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	76	#define CONFIG_SYS_NAND_ONFI_DETECTION
	77
	78	/* DMA config, needed for GPMI/MXS NAND support */
	79	#define CONFIG_APBH_DMA
	80	#define CONFIG_APBH_DMA_BURST
	81	#define CONFIG_APBH_DMA_BURST8
	82
5d6050fd	83	/* Environment in NAND */
5d6050fd SR	84	#define CONFIG_ENV_OFFSET (16 << 20)
	85	#define CONFIG_ENV_SECT_SIZE (128 << 10)
	86	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	87	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
	88	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	89
	90	#else /* CONFIG_CMD_NAND */
	91
	92	/* Environment in MMC */
	93	#define CONFIG_ENV_SIZE (8 << 10)
5d6050fd SR	94	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	95	#define CONFIG_SYS_MMC_ENV_DEV 0
	96
	97	#endif /* CONFIG_CMD_NAND */
	98
	99	/*
	100	* U-Boot configuration
	101	*/
	102
5d6050fd	103	/* Board startup config */
5d6050fd SR	104	#define CONFIG_MISC_INIT_R
5d6050fd SR	105
5d6050fd SR	106	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	107	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
	108	PHYS_SDRAM_SIZE - (12 << 20))
	109
5d6050fd SR	110	#define CONFIG_BOOTCOMMAND "run bootubi_scr"
	111
	112	/* Miscellaneous configurable options */
5d6050fd SR	113	#define CONFIG_PREBOOT
5d6050fd SR	114
5d6050fd SR	115	/* Print Buffer Size */
	116	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	117	sizeof(CONFIG_SYS_PROMPT) + 16)
5d6050fd	118
5d6050fd	119	/* MTD/UBI/UBIFS config */
5d6050fd SR	120	#define CONFIG_MTD_DEVICE
5d6050fd SR	121	#define CONFIG_MTD_PARTITIONS
5d6050fd SR	122
	123	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
	124	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	125	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
	126	"512k(env1),512k(env2),-(ubi)"
	127	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
	128	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	129	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
	130	"512k(env1),512k(env2),495M(ubi0)," \
	131	"14M(res0),2M(res1)," \
	132	"512k(res2),512k(res3),-(ubi1)"
	133	#endif
	134
5d6050fd SR	135	/*
	136	* Environment configuration
	137	*/
	138
	139	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
	140	#define CONFIG_COMMON_ENV_UBI \
	141	"setubipartition=env set ubipartition ubi\0" \
	142	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
	143	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
	144	#define CONFIG_COMMON_ENV_UBI \
	145	"setubipartition=env set ubipartition ubi$boot_vol\0" \
	146	"setubirfs=env set ubirfs ubi0:rootfs\0"
	147	#endif
	148
	149	#define CONFIG_COMMON_ENV_MISC \
	150	"user=user\0" \
	151	"project="CONFIG_PLATINUM_PROJECT"\0" \
	152	"uimage=uImage\0" \
	153	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
	154	"serverip=serverip\0" \
	155	"memaddrlinux=0x10800000\0" \
	156	"memaddrsrc=0x11000000\0" \
	157	"memaddrdtb=0x12000000\0" \
	158	"console=ttymxc0\0" \
	159	"baudrate=115200\0" \
	160	"boot_scr=boot.uboot\0" \
	161	"boot_vol=0\0" \
	162	"mtdids="MTDIDS_DEFAULT"\0" \
	163	"mtdparts="MTDPARTS_DEFAULT"\0" \
	164	"mmcfs=ext2\0" \
	165	"mmcrootpart=1\0" \
	166	\
	167	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
	168	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
	169	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
	170	"setubifilelinux=env set ubifilelinux boot/$uimage\0" \
	171	"setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
	172	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
	173	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
	174	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
	175	\
	176	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
	177	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
	178	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
	179	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
	180	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
	181	"$mmcfilelinux\0" \
	182	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
	183	"$mmcfiledtb\0" \
	184	\
	185	"ubipart=ubi part $ubipartition\0" \
	186	"ubimount=ubifsmount $ubirfs\0" \
	187	\
	188	"setbootargscommon=env set bootargs $bootargs " \
	189	"console=$console,$baudrate enable_wait_mode=off\0" \
	190	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
	191	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
	192	"setbootargsubirfs=env set bootargs $bootargs " \
	193	"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
	194	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
	195	"nfsroot=$serverip:$nfspath,v3,tcp\0" \
	196	"setbootargsmmcrfs=env set bootargs $bootargs " \
	197	"root=$mmcrootdev rootwait rw\0" \
	198	\
199	"bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
200	"setbootargscommon setbootargsmtd setbootargsdhcp " \
201	"setbootargsnfsrfs;" \
202	"run loadtftpkernel loadtftpdtb;" \
203	"bootm $memaddrlinux - $memaddrdtb\0" \
204	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
205	"run setubipartition setubirfs;" \
206	"run setbootargscommon setbootargsmtd " \
207	"setbootargsubirfs;" \
208	"run loadtftpkernel loadtftpdtb;" \
209	"bootm $memaddrlinux - $memaddrdtb\0" \
210	"bootubi=run setubipartition setubirfs setubifilelinux " \
211	"setubipfiledtb;" \
212	"run setbootargscommon setbootargsmtd " \
213	"setbootargsubirfs;" \
214	"run ubipart ubimount loadubikernel loadubidtb;" \
215	"bootm $memaddrlinux - $memaddrdtb\0" \
216	"bootubi_scr=run setubipartition setubirfs;" \
217	"run ubipart ubimount;" \
218	"if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
219	"then source ${memaddrsrc}; else run bootubi; fi\0" \
220	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
221	"setbootargscommon setbootargsmmcrfs;" \
222	"run loadmmckernel loadmmcdtb;" \
223	"bootm $memaddrlinux - $memaddrdtb\0" \
224	\
225	"bootcmd="CONFIG_BOOTCOMMAND"\0"
226
227	#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
228	CONFIG_COMMON_ENV_UBI
229	#endif /* __PLATINUM_CONFIG_H__ */