projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| f0a2c7b4 II |
1 | /* |
| 2 | * (C) Copyright 2007-2008 | |
| 3 | * Stelian Pop <stelian.pop@leadtechdesign.com> | |
| 4 | * Lead Tech Design <www.leadtechdesign.com> | |
| 5 | * Ilko Iliev <www.ronetix.at> | |
| 6 | * | |
| 7 | * Configuation settings for the RONETIX PM9263 board. | |
| 8 | * | |
| 9 | * See file CREDITS for list of people who contributed to this | |
| 10 | * project. | |
| 11 | * | |
| 12 | * This program is free software; you can redistribute it and/or | |
| 13 | * modify it under the terms of the GNU General Public License as | |
| 14 | * published by the Free Software Foundation; either version 2 of | |
| 15 | * the License, or (at your option) any later version. | |
| 16 | * | |
| 17 | * This program is distributed in the hope that it will be useful, | |
| 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 20 | * GNU General Public License for more details. | |
| 21 | * | |
| 22 | * You should have received a copy of the GNU General Public License | |
| 23 | * along with this program; if not, write to the Free Software | |
| 24 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 25 | * MA 02111-1307 USA | |
| 26 | */ | |
| 27 | ||
| 28 | #ifndef __CONFIG_H | |
| 29 | #define __CONFIG_H | |
| 30 | ||
| 31 | /* ARM asynchronous clock */ | |
| b2403589 | 32 | #define CONFIG_DISPLAY_CPUINFO |
| f0a2c7b4 II |
33 | #define CONFIG_DISPLAY_BOARDINFO |
| 34 | ||
| 35 | #define MASTER_PLL_DIV 15 | |
| 36 | #define MASTER_PLL_MUL 162 | |
| 37 | #define MAIN_PLL_DIV 2 /* 2 or 4 */ | |
| 38 | #define AT91_MAIN_CLOCK 18432000 | |
| 39 | ||
| 6ebff365 | 40 | #define CONFIG_SYS_HZ 1000 |
| f0a2c7b4 II |
41 | |
| 42 | #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ | |
| 43 | #define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ | |
| 44 | #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ | |
| 45 | #define CONFIG_ARCH_CPU_INIT | |
| 46 | #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ | |
| 47 | ||
| 48 | /* clocks */ | |
| 49 | #define CONFIG_SYS_MOR_VAL 0x00002001 /* CKGR_MOR - enable main osc. */ | |
| 50 | #define CONFIG_SYS_PLLAR_VAL \ | |
| 51 | (0x2000BF00 | ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) | |
| 52 | ||
| 53 | #if (MAIN_PLL_DIV == 2) | |
| 54 | /* PCK/2 = MCK Master Clock from PLLA */ | |
| 55 | #define CONFIG_SYS_MCKR1_VAL 0x00000100 | |
| 56 | /* PCK/2 = MCK Master Clock from PLLA */ | |
| 57 | #define CONFIG_SYS_MCKR2_VAL 0x00000102 | |
| 58 | #else | |
| 59 | /* PCK/4 = MCK Master Clock from PLLA */ | |
| 60 | #define CONFIG_SYS_MCKR1_VAL 0x00000200 | |
| 61 | /* PCK/4 = MCK Master Clock from PLLA */ | |
| 62 | #define CONFIG_SYS_MCKR2_VAL 0x00000202 | |
| 63 | #endif | |
| 64 | /* define PDC[31:16] as DATA[31:16] */ | |
| 65 | #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 | |
| 66 | /* no pull-up for D[31:16] */ | |
| 67 | #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 | |
| 68 | /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ | |
| 69 | #define CONFIG_SYS_MATRIX_EBI0CSA_VAL 0x0001010A | |
| f0a2c7b4 II |
70 | |
| 71 | /* SDRAM */ | |
| 72 | /* SDRAMC_MR Mode register */ | |
| 73 | #define CONFIG_SYS_SDRC_MR_VAL1 0 | |
| 74 | /* SDRAMC_TR - Refresh Timer register */ | |
| 75 | #define CONFIG_SYS_SDRC_TR_VAL1 0x13C | |
| 76 | #define CONFIG_SYS_SDRC_CR_VAL 0x85227279 /*CL3*/ | |
| 77 | /* Memory Device Register -> SDRAM */ | |
| 78 | #define CONFIG_SYS_SDRC_MDR_VAL 0 | |
| 79 | #define CONFIG_SYS_SDRC_MR_VAL2 0x00000002 /* SDRAMC_MR */ | |
| 80 | #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ | |
| 81 | #define CONFIG_SYS_SDRC_MR_VAL3 4 /* SDRC_MR */ | |
| 82 | #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ | |
| 83 | #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ | |
| 84 | #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ | |
| 85 | #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ | |
| 86 | #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ | |
| 87 | #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ | |
| 88 | #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ | |
| 89 | #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ | |
| 90 | #define CONFIG_SYS_SDRC_MR_VAL4 3 /* SDRC_MR */ | |
| 91 | #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ | |
| 92 | #define CONFIG_SYS_SDRC_MR_VAL5 0 /* SDRC_MR */ | |
| 93 | #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ | |
| 94 | #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ | |
| 95 | #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ | |
| 96 | ||
| 97 | /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ | |
| 98 | #define CONFIG_SYS_SMC0_SETUP0_VAL 0x0A0A0A0A /* SMC_SETUP */ | |
| 99 | #define CONFIG_SYS_SMC0_PULSE0_VAL 0x0B0B0B0B /* SMC_PULSE */ | |
| 100 | #define CONFIG_SYS_SMC0_CYCLE0_VAL 0x00160016 /* SMC_CYCLE */ | |
| 7a11c7f9 | 101 | #define CONFIG_SYS_SMC0_MODE0_VAL 0x00161003 /* SMC_MODE */ |
| f0a2c7b4 II |
102 | |
| 103 | #define CONFIG_SYS_RSTC_RMR_VAL 0xA5000301 /* user reset enable */ | |
| 104 | ||
| 105 | /* Watchdog */ | |
| 106 | #define CONFIG_SYS_WDTC_WDMR_VAL 0x3fff8fff /* disable watchdog */ | |
| 107 | ||
| 108 | /* */ | |
| 109 | ||
| 110 | #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ | |
| 111 | #define CONFIG_SETUP_MEMORY_TAGS 1 | |
| 112 | #define CONFIG_INITRD_TAG 1 | |
| 113 | ||
| 114 | #undef CONFIG_SKIP_LOWLEVEL_INIT | |
| 115 | #undef CONFIG_SKIP_RELOCATE_UBOOT | |
| 116 | #define CONFIG_USER_LOWLEVEL_INIT 1 | |
| 117 | ||
| 118 | /* | |
| 119 | * Hardware drivers | |
| 120 | */ | |
| 121 | #define CONFIG_ATMEL_USART 1 | |
| 122 | #undef CONFIG_USART0 | |
| 123 | #undef CONFIG_USART1 | |
| 124 | #undef CONFIG_USART2 | |
| 125 | #define CONFIG_USART3 1 /* USART 3 is DBGU */ | |
| 126 | ||
| 127 | /* LCD */ | |
| 128 | #define CONFIG_LCD 1 | |
| 129 | #define LCD_BPP LCD_COLOR8 | |
| 130 | #define CONFIG_LCD_LOGO 1 | |
| 131 | #undef LCD_TEST_PATTERN | |
| 132 | #define CONFIG_LCD_INFO 1 | |
| 133 | #define CONFIG_LCD_INFO_BELOW_LOGO 1 | |
| 134 | #define CONFIG_SYS_WHITE_ON_BLACK 1 | |
| 135 | #define CONFIG_ATMEL_LCD 1 | |
| 136 | #define CONFIG_ATMEL_LCD_BGR555 1 | |
| 137 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 | |
| 138 | ||
| 139 | #define CONFIG_LCD_IN_PSRAM 1 | |
| 140 | ||
| 141 | /* LED */ | |
| 142 | #define CONFIG_AT91_LED | |
| 143 | #define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */ | |
| 144 | #define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ | |
| 145 | ||
| 146 | #define CONFIG_BOOTDELAY 3 | |
| 147 | ||
| 148 | /* | |
| 149 | * BOOTP options | |
| 150 | */ | |
| 151 | #define CONFIG_BOOTP_BOOTFILESIZE 1 | |
| 152 | #define CONFIG_BOOTP_BOOTPATH 1 | |
| 153 | #define CONFIG_BOOTP_GATEWAY 1 | |
| 154 | #define CONFIG_BOOTP_HOSTNAME 1 | |
| 155 | ||
| 156 | /* | |
| 157 | * Command line configuration. | |
| 158 | */ | |
| 159 | #include <config_cmd_default.h> | |
| 160 | #undef CONFIG_CMD_BDI | |
| 161 | #undef CONFIG_CMD_IMI | |
| 162 | #undef CONFIG_CMD_AUTOSCRIPT | |
| 163 | #undef CONFIG_CMD_FPGA | |
| 164 | #undef CONFIG_CMD_LOADS | |
| 165 | #undef CONFIG_CMD_IMLS | |
| 166 | ||
| 167 | #define CONFIG_CMD_PING 1 | |
| 168 | #define CONFIG_CMD_DHCP 1 | |
| 169 | #define CONFIG_CMD_NAND 1 | |
| 170 | #define CONFIG_CMD_USB 1 | |
| 171 | ||
| 172 | /* SDRAM */ | |
| 173 | #define CONFIG_NR_DRAM_BANKS 1 | |
| 174 | #define PHYS_SDRAM 0x20000000 | |
| 175 | #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ | |
| 176 | ||
| 177 | /* DataFlash */ | |
| 178 | #define CONFIG_ATMEL_DATAFLASH_SPI | |
| 179 | #define CONFIG_HAS_DATAFLASH 1 | |
| 180 | #define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) | |
| 181 | #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 | |
| 182 | #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ | |
| 183 | #define AT91_SPI_CLK 15000000 | |
| 184 | #define DATAFLASH_TCSS (0x1a << 16) | |
| 185 | #define DATAFLASH_TCHS (0x1 << 24) | |
| 186 | ||
| 187 | /* NOR flash, if populated */ | |
| 188 | #define CONFIG_SYS_FLASH_CFI 1 | |
| 189 | #define CONFIG_FLASH_CFI_DRIVER 1 | |
| 190 | #define PHYS_FLASH_1 0x10000000 | |
| 191 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 | |
| 192 | #define CONFIG_SYS_MAX_FLASH_SECT 256 | |
| 193 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
| 194 | ||
| 195 | /* NAND flash */ | |
| 196 | #ifdef CONFIG_CMD_NAND | |
| 197 | #define CONFIG_NAND_ATMEL | |
| 198 | #define CONFIG_SYS_NAND_MAX_CHIPS 1 | |
| 199 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 200 | #define CONFIG_SYS_NAND_BASE 0x40000000 | |
| 201 | #define CONFIG_SYS_NAND_DBW_8 1 | |
| 202 | /* our ALE is AD21 */ | |
| 203 | #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) | |
| 204 | /* our CLE is AD22 */ | |
| 205 | #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) | |
| 206 | #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 | |
| 207 | #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30 | |
| 208 | #endif | |
| 209 | ||
| 210 | #define CONFIG_CMD_JFFS2 1 | |
| 211 | #define CONFIG_JFFS2_CMDLINE 1 | |
| 212 | #define CONFIG_JFFS2_NAND 1 | |
| 213 | #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ | |
| 214 | #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ | |
| 215 | #define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ | |
| 216 | ||
| 217 | /* PSRAM */ | |
| 218 | #define PHYS_PSRAM 0x70000000 | |
| 219 | #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ | |
| 220 | ||
| 221 | /* Ethernet */ | |
| 222 | #define CONFIG_MACB 1 | |
| 223 | #define CONFIG_RMII 1 | |
| 224 | #define CONFIG_NET_MULTI 1 | |
| 225 | #define CONFIG_NET_RETRY_COUNT 20 | |
| 226 | #define CONFIG_RESET_PHY_R 1 | |
| 227 | ||
| 228 | /* USB */ | |
| 229 | #define CONFIG_USB_ATMEL | |
| 230 | #define CONFIG_USB_OHCI_NEW 1 | |
| 231 | #define CONFIG_DOS_PARTITION 1 | |
| 232 | #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 | |
| 233 | #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ | |
| 234 | #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" | |
| 235 | #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 | |
| 236 | #define CONFIG_USB_STORAGE 1 | |
| 237 | ||
| 238 | #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ | |
| 239 | ||
| 240 | #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM | |
| 241 | #define CONFIG_SYS_MEMTEST_END 0x23e00000 | |
| 242 | ||
| 243 | #define CONFIG_SYS_USE_FLASH 1 | |
| 244 | #undef CONFIG_SYS_USE_DATAFLASH | |
| 245 | #undef CONFIG_SYS_USE_NANDFLASH | |
| 246 | ||
| 247 | #ifdef CONFIG_SYS_USE_DATAFLASH | |
| 248 | ||
| 249 | /* bootstrap + u-boot + env + linux in dataflash on CS0 */ | |
| 250 | #define CONFIG_ENV_IS_IN_DATAFLASH | |
| 251 | #define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) | |
| 252 | #define CONFIG_ENV_OFFSET 0x4200 | |
| 253 | #define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) | |
| 254 | #define CONFIG_ENV_SIZE 0x4200 | |
| 255 | #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" | |
| 256 | #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ | |
| 257 | "root=/dev/mtdblock0 " \ | |
| 258 | "mtdparts=at91_nand:-(root) "\ | |
| 259 | "rw rootfstype=jffs2" | |
| 260 | ||
| 261 | #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ | |
| 262 | ||
| 263 | /* bootstrap + u-boot + env + linux in nandflash */ | |
| 264 | #define CONFIG_ENV_IS_IN_NAND | |
| 265 | #define CONFIG_ENV_OFFSET 0x60000 | |
| 266 | #define CONFIG_ENV_OFFSET_REDUND 0x80000 | |
| 267 | #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ | |
| 268 | #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" | |
| 269 | #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ | |
| 270 | "root=/dev/mtdblock5 " \ | |
| 271 | "mtdparts=at91_nand:" \ | |
| 272 | "128k(bootstrap)ro," \ | |
| 273 | "256k(uboot)ro," \ | |
| 274 | "128k(env1)ro," \ | |
| 275 | "128k(env2)ro," \ | |
| 276 | "2M(linux)," \ | |
| 277 | "-(root) " \ | |
| 278 | "rw rootfstype=jffs2" | |
| 279 | ||
| 280 | #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ | |
| 281 | ||
| 282 | #define CONFIG_ENV_IS_IN_FLASH 1 | |
| 283 | #define CONFIG_ENV_OFFSET 0x40000 | |
| 284 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 285 | #define CONFIG_ENV_SIZE 0x10000 | |
| 286 | #define CONFIG_ENV_OVERWRITE 1 | |
| 287 | ||
| 288 | /* JFFS Partition offset set */ | |
| 289 | #define CONFIG_SYS_JFFS2_FIRST_BANK 0 | |
| 290 | #define CONFIG_SYS_JFFS2_NUM_BANKS 1 | |
| 291 | ||
| 292 | /* 512k reserved for u-boot */ | |
| 293 | #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 | |
| 294 | ||
| 295 | #define CONFIG_BOOTCOMMAND "run flashboot" | |
| 296 | #define CONFIG_ROOTPATH /ronetix/rootfs | |
| 297 | #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" | |
| 298 | ||
| 299 | #define CONFIG_CON_ROT "fbcon=rotate:3 " | |
| 300 | #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\ | |
| 301 | CONFIG_CON_ROT | |
| 302 | ||
| 303 | #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" | |
| 304 | #define MTDPARTS_DEFAULT \ | |
| 305 | "mtdparts=physmap-flash.0:" \ | |
| 306 | "256k(u-boot)ro," \ | |
| 307 | "64k(u-boot-env)ro," \ | |
| 308 | "1408k(kernel)," \ | |
| 309 | "-(rootfs);" \ | |
| 310 | "nand:-(nand)" | |
| 311 | ||
| 312 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 313 | "mtdids=" MTDIDS_DEFAULT "\0" \ | |
| 314 | "mtdparts=" MTDPARTS_DEFAULT "\0" \ | |
| 315 | "partition=nand0,0\0" \ | |
| 316 | "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ | |
| 317 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
| 318 | CONFIG_CON_ROT \ | |
| 319 | "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ | |
| 320 | "addip=setenv bootargs $(bootargs) " \ | |
| 321 | "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ | |
| 322 | ":$(hostname):eth0:off\0" \ | |
| 323 | "ramboot=tftpboot 0x22000000 vmImage;" \ | |
| 324 | "run ramargs;run addip;bootm 22000000\0" \ | |
| 325 | "nfsboot=tftpboot 0x22000000 vmImage;" \ | |
| 326 | "run nfsargs;run addip;bootm 22000000\0" \ | |
| 327 | "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ | |
| 328 | "" | |
| 329 | ||
| 330 | #else | |
| 331 | #error "Undefined memory device" | |
| 332 | #endif | |
| 333 | ||
| 334 | #define CONFIG_BAUDRATE 115200 | |
| 335 | #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } | |
| 336 | ||
| 337 | #define CONFIG_SYS_PROMPT "u-boot-pm9263> " | |
| 338 | #define CONFIG_SYS_CBSIZE 256 | |
| 339 | #define CONFIG_SYS_MAXARGS 16 | |
| 340 | #define CONFIG_SYS_PBSIZE \ | |
| 341 | (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
| 342 | #define CONFIG_SYS_LONGHELP 1 | |
| 343 | #define CONFIG_CMDLINE_EDITING 1 | |
| 344 | ||
| 345 | #define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) | |
| 346 | /* | |
| 347 | * Size of malloc() pool | |
| 348 | */ | |
| 349 | #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) | |
| 350 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ | |
| 351 | ||
| 352 | #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ | |
| 353 | ||
| 354 | #ifdef CONFIG_USE_IRQ | |
| 355 | #error CONFIG_USE_IRQ not supported | |
| 356 | #endif | |
| 357 | ||
| 358 | #endif |