[people/ms/u-boot.git] / include / configs / pogo_e02.h

/*
 * Copyright (C) 2012
 * David Purdy <david.c.purdy@gmail.com>
 *
 * Based on Kirkwood support:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_POGO_E02_H
#define _CONFIG_POGO_E02_H

/*
 * Machine type definition and ID
 */
#define MACH_TYPE_POGO_E02		3542
#define CONFIG_MACH_TYPE		MACH_TYPE_POGO_E02

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#define CONFIG_SYS_MVFS
#define CONFIG_CMD_ENV
#define CONFIG_CMD_NAND

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

#define CONFIG_ENV_SIZE			0x20000	/* 128k */
#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND \
	"setenv bootargs $(bootargs_console); " \
	"run bootcmd_usb; " \
	"bootm 0x00800000 0x01100000"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
	"32M(rootfs),-(data)\0"\
	"mtdids=nand0=orion_nand\0"\
	"bootargs_console=console=ttyS0,115200\0" \
	"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
	"ext2load usb 0:1 0x01100000 /uInitrd\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR	0
#endif /* CONFIG_CMD_NET */

/*
 * File system
 */
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO

#endif /* _CONFIG_POGO_E02_H */
Commit	Line	Data
1d0f5fa1 DP	1	/*
	2	* Copyright (C) 2012
	3	* David Purdy <david.c.purdy@gmail.com>
	4	*
	5	* Based on Kirkwood support:
	6	* (C) Copyright 2009
	7	* Marvell Semiconductor <www.marvell.com>
	8	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
1d0f5fa1 DP	11	*/
	12
	13	#ifndef _CONFIG_POGO_E02_H
	14	#define _CONFIG_POGO_E02_H
	15
	16	/*
	17	* Machine type definition and ID
	18	*/
	19	#define MACH_TYPE_POGO_E02 3542
	20	#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
1d0f5fa1 DP	21
	22	/*
	23	* High Level Configuration Options (easy to change)
	24	*/
	25	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
1d0f5fa1 DP	26	#define CONFIG_KW88F6281 /* SOC Name */
	27	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	28
	29	/*
	30	* Commands configuration
	31	*/
	32	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	33	#define CONFIG_SYS_MVFS
1d0f5fa1	34	#define CONFIG_CMD_ENV
1d0f5fa1	35	#define CONFIG_CMD_NAND
1d0f5fa1 DP	36
	37	/*
	38	* mv-common.h should be defined after CMD configs since it used them
	39	* to enable certain macros
	40	*/
	41	#include "mv-common.h"
	42
1d0f5fa1 DP	43	/*
	44	* Environment variables configurations
	45	*/
	46	#ifdef CONFIG_CMD_NAND
	47	#define CONFIG_ENV_IS_IN_NAND
	48	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
	49	#else
	50	#define CONFIG_ENV_IS_NOWHERE
	51	#endif
	52
	53	#define CONFIG_ENV_SIZE 0x20000 /* 128k */
	54	#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
	55
	56	/*
	57	* Default environment variables
	58	*/
	59	#define CONFIG_BOOTCOMMAND \
	60	"setenv bootargs $(bootargs_console); " \
	61	"run bootcmd_usb; " \
	62	"bootm 0x00800000 0x01100000"
	63
	64	#define CONFIG_EXTRA_ENV_SETTINGS \
	65	"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
	66	"32M(rootfs),-(data)\0"\
	67	"mtdids=nand0=orion_nand\0"\
	68	"bootargs_console=console=ttyS0,115200\0" \
	69	"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
	70	"ext2load usb 0:1 0x01100000 /uInitrd\0"
	71
	72	/*
	73	* Ethernet Driver configuration
	74	*/
	75	#ifdef CONFIG_CMD_NET
	76	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	77	#define CONFIG_PHY_BASE_ADR 0
	78	#endif /* CONFIG_CMD_NET */
	79
	80	/*
	81	* File system
	82	*/
1d0f5fa1	83	#define CONFIG_CMD_JFFS2
1d0f5fa1 DP	84	#define CONFIG_CMD_UBIFS
	85	#define CONFIG_RBTREE
	86	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	87	#define CONFIG_MTD_PARTITIONS
	88	#define CONFIG_CMD_MTDPARTS
	89	#define CONFIG_LZO
	90
	91	#endif /* _CONFIG_POGO_E02_H */