[people/ms/u-boot.git] / include / configs / pxm2.h

/*
 * siemens pxm2
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_PXM2_H
#define __CONFIG_PXM2_H

#define CONFIG_SIEMENS_PXM2
#define MACH_TYPE_PXM2			4309
#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_PXM2

#include "siemens-am33x-common.h"

#define CONFIG_SYS_MPUCLK	720
#define DDR_IOCTRL_VAL		0x18b
#define DDR_PLL_FREQ		266

#define BOARD_DFU_BUTTON_GPIO	59
#define BOARD_LCD_POWER		111
#define BOARD_BACK_LIGHT	112
#define BOARD_TOUCH_POWER	57

#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=59\0" \
	"led0=117,0,1\0" \

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		400000
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50

#define CONFIG_PHY_ATHEROS

#define CONFIG_FACTORYSET

/* Watchdog */
#define CONFIG_OMAP_WATCHDOG

#ifndef CONFIG_SPL_BUILD

/* Use common default */
#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V1

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=pxm2\0" \
	"ubi_off=2048\0"\
	"nand_img_size=0x500000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"splashpos=m,m\0"	\
	CONFIG_ENV_SETTINGS_V1 \
	CONFIG_ENV_SETTINGS_NAND_V1 \
	"mmc_dev=0\0" \
	"mmc_root=/dev/mmcblk0p2 rw\0" \
	"mmc_root_fs_type=ext4 rootwait\0" \
	"mmc_load_uimage=" \
		"mmc rescan; " \
		"setenv bootfile uImage;" \
		"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"mmc_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv bootargs ${bootargs} " \
		"root=${mmc_root} ${mtdparts}" \
		"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
		"eth=${ethaddr} " \
		"\0" \
	"mmc_boot=run mmc_args; " \
		"run mmc_load_uimage; " \
		"bootm ${kloadaddr}\0" \
	""

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */

#define CONFIG_BOOTCOMMAND \
	"if dfubutton; then " \
		"run dfu_start; " \
		"reset; " \
	"fi; " \
	"if mmc rescan; then " \
		"echo SD/MMC found on device ${mmc_dev};" \
		"if run loadbootenv; then " \
			"echo Loaded environment from ${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if test -n $uenvcmd; then " \
			"echo Running uenvcmd ...;" \
			"run uenvcmd;" \
		"fi;" \
		"if run mmc_load_uimage; then " \
			"run mmc_args;" \
			"bootm ${kloadaddr};" \
		"fi;" \
	"fi;" \
	"run nand_boot;" \
	"reset;"

#else

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */

#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CMD_BMP
#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
#define PWM_TICKS	0x1388
#define PWM_DUTY	0x200
#endif

#endif	/* ! __CONFIG_PXM2_H */
Commit	Line	Data
c0dcece7 HS	1	/*
	2	* siemens pxm2
	3	* (C) Copyright 2013 Siemens Schweiz AG
	4	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	5	*
	6	* Based on:
	7	* U-Boot file:/include/configs/am335x_evm.h
	8	*
	9	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13
	14	#ifndef __CONFIG_PXM2_H
	15	#define __CONFIG_PXM2_H
	16
	17	#define CONFIG_SIEMENS_PXM2
	18	#define MACH_TYPE_PXM2 4309
	19	#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
	20
	21	#include "siemens-am33x-common.h"
	22
	23	#define CONFIG_SYS_MPUCLK 720
9fc2ed40	24	#define DDR_IOCTRL_VAL 0x18b
c0dcece7 HS	25	#define DDR_PLL_FREQ 266
	26
	27	#define BOARD_DFU_BUTTON_GPIO 59
c0dcece7 HS	28	#define BOARD_LCD_POWER 111
	29	#define BOARD_BACK_LIGHT 112
	30	#define BOARD_TOUCH_POWER 57
	31
61159b76 HS	32	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	33	"button_dfu0=59\0" \
	34	"led0=117,0,1\0" \
	35
c0dcece7 HS	36	/* Physical Memory Map */
	37	#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
	38
	39	/* I2C Configuration */
	40	#define CONFIG_SYS_I2C_SPEED 400000
	41	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	42
c0dcece7 HS	43	#define CONFIG_PHY_ATHEROS
	44
	45	#define CONFIG_FACTORYSET
	46
c0dcece7 HS	47	/* Watchdog */
	48	#define CONFIG_OMAP_WATCHDOG
	49
	50	#ifndef CONFIG_SPL_BUILD
	51
61159b76 HS	52	/* Use common default */
	53	#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1
	54
c0dcece7 HS	55	/* Default env settings */
	56	#define CONFIG_EXTRA_ENV_SETTINGS \
	57	"hostname=pxm2\0" \
6b3943f1	58	"ubi_off=2048\0"\
c0dcece7 HS	59	"nand_img_size=0x500000\0" \
c0dcece7 HS	60	"optargs=\0" \
61159b76 HS	61	"preboot=draco_led 0\0" \
61159b76 HS	62	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
56eb3da4	63	"splashpos=m,m\0" \
61159b76 HS	64	CONFIG_ENV_SETTINGS_V1 \
61159b76 HS	65	CONFIG_ENV_SETTINGS_NAND_V1 \
c0dcece7 HS	66	"mmc_dev=0\0" \
	67	"mmc_root=/dev/mmcblk0p2 rw\0" \
	68	"mmc_root_fs_type=ext4 rootwait\0" \
	69	"mmc_load_uimage=" \
	70	"mmc rescan; " \
	71	"setenv bootfile uImage;" \
	72	"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	73	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	74	"importbootenv=echo Importing environment from mmc ...; " \
	75	"env import -t $loadaddr $filesize\0" \
	76	"mmc_args=run bootargs_defaults;" \
	77	"mtdparts default;" \
	78	"setenv bootargs ${bootargs} " \
	79	"root=${mmc_root} ${mtdparts}" \
	80	"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
	81	"eth=${ethaddr} " \
	82	"\0" \
	83	"mmc_boot=run mmc_args; " \
	84	"run mmc_load_uimage; " \
	85	"bootm ${kloadaddr}\0" \
	86	""
	87
	88	#ifndef CONFIG_RESTORE_FLASH
	89	/* set to negative value for no autoboot */
c0dcece7 HS	90
	91	#define CONFIG_BOOTCOMMAND \
	92	"if dfubutton; then " \
	93	"run dfu_start; " \
	94	"reset; " \
	95	"fi; " \
	96	"if mmc rescan; then " \
	97	"echo SD/MMC found on device ${mmc_dev};" \
	98	"if run loadbootenv; then " \
	99	"echo Loaded environment from ${bootenv};" \
	100	"run importbootenv;" \
	101	"fi;" \
	102	"if test -n $uenvcmd; then " \
	103	"echo Running uenvcmd ...;" \
	104	"run uenvcmd;" \
	105	"fi;" \
	106	"if run mmc_load_uimage; then " \
	107	"run mmc_args;" \
	108	"bootm ${kloadaddr};" \
	109	"fi;" \
	110	"fi;" \
	111	"run nand_boot;" \
56eb3da4	112	"reset;"
c0dcece7 HS	113
c0dcece7 HS	114	#else
c0dcece7 HS	115
	116	#define CONFIG_BOOTCOMMAND \
	117	"setenv autoload no; " \
	118	"dhcp; " \
	119	"if tftp 80000000 debrick.scr; then " \
	120	"source 80000000; " \
	121	"fi"
	122	#endif
	123	#endif /* CONFIG_SPL_BUILD */
	124
c0dcece7 HS	125	#if defined(CONFIG_VIDEO)
c0dcece7 HS	126	#define CONFIG_VIDEO_DA8XX
c0dcece7 HS	127	#define CONFIG_SPLASH_SCREEN
	128	#define CONFIG_SPLASH_SCREEN_ALIGN
	129	#define CONFIG_VIDEO_LOGO
	130	#define CONFIG_VIDEO_BMP_RLE8
	131	#define CONFIG_VIDEO_BMP_LOGO
	132	#define CONFIG_CMD_BMP
	133	#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
	134	#define PWM_TICKS 0x1388
	135	#define PWM_DUTY 0x200
	136	#endif
	137
	138	#endif /* ! __CONFIG_PXM2_H */