[people/ms/u-boot.git] / include / configs / pxm2.h

/*
 * siemens pxm2
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_PXM2_H
#define __CONFIG_PXM2_H

#define CONFIG_SIEMENS_PXM2
#define MACH_TYPE_PXM2			4309
#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_PXM2

#include "siemens-am33x-common.h"

#define CONFIG_SYS_MPUCLK	720
#define DDR_IOCTRL_VAL		0x18b
#define DDR_PLL_FREQ		266

#define BOARD_DFU_BUTTON_GPIO	59
#define BOARD_DFU_BUTTON_LED	117
#define BOARD_LCD_POWER		111
#define BOARD_BACK_LIGHT	112
#define BOARD_TOUCH_POWER	57

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		400000
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50


#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300

#undef CONFIG_SPL_NET_SUPPORT
#undef CONFIG_SPL_NET_VCI_STRING
#undef CONFIG_SPL_ETH_SUPPORT

#define CONFIG_PHY_ATHEROS

#define CONFIG_FACTORYSET

/* UBI Support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#endif

/* Watchdog */
#define CONFIG_OMAP_WATCHDOG

#ifndef CONFIG_SPL_BUILD

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=pxm2\0" \
	"nand_img_size=0x500000\0" \
	"optargs=\0" \
	"splashpos=m,m\0"	\
	CONFIG_COMMON_ENV_SETTINGS \
	"mmc_dev=0\0" \
	"mmc_root=/dev/mmcblk0p2 rw\0" \
	"mmc_root_fs_type=ext4 rootwait\0" \
	"mmc_load_uimage=" \
		"mmc rescan; " \
		"setenv bootfile uImage;" \
		"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"mmc_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv bootargs ${bootargs} " \
		"root=${mmc_root} ${mtdparts}" \
		"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
		"eth=${ethaddr} " \
		"\0" \
	"mmc_boot=run mmc_args; " \
		"run mmc_load_uimage; " \
		"bootm ${kloadaddr}\0" \
	""

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */
#define CONFIG_BOOTDELAY		3

#define CONFIG_BOOTCOMMAND \
	"if dfubutton; then " \
		"run dfu_start; " \
		"reset; " \
	"fi; " \
	"if mmc rescan; then " \
		"echo SD/MMC found on device ${mmc_dev};" \
		"if run loadbootenv; then " \
			"echo Loaded environment from ${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if test -n $uenvcmd; then " \
			"echo Running uenvcmd ...;" \
			"run uenvcmd;" \
		"fi;" \
		"if run mmc_load_uimage; then " \
			"run mmc_args;" \
			"bootm ${kloadaddr};" \
		"fi;" \
	"fi;" \
	"run nand_boot;" \
	"reset;"

#else
#define CONFIG_BOOTDELAY		0

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */

#define CONFIG_VIDEO
#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CMD_BMP
#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
#define PWM_TICKS	0x1388
#define PWM_DUTY	0x200
#define CONFIG_SYS_CONSOLE_BG_COL	0xff
#define CONFIG_SYS_CONSOLE_FG_COL	0x00
#endif

#endif	/* ! __CONFIG_PXM2_H */
Commit	Line	Data
c0dcece7 HS	1	/*
	2	* siemens pxm2
	3	* (C) Copyright 2013 Siemens Schweiz AG
	4	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	5	*
	6	* Based on:
	7	* U-Boot file:/include/configs/am335x_evm.h
	8	*
	9	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13
	14	#ifndef __CONFIG_PXM2_H
	15	#define __CONFIG_PXM2_H
	16
	17	#define CONFIG_SIEMENS_PXM2
	18	#define MACH_TYPE_PXM2 4309
	19	#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
	20
	21	#include "siemens-am33x-common.h"
	22
	23	#define CONFIG_SYS_MPUCLK 720
9fc2ed40	24	#define DDR_IOCTRL_VAL 0x18b
c0dcece7 HS	25	#define DDR_PLL_FREQ 266
	26
	27	#define BOARD_DFU_BUTTON_GPIO 59
	28	#define BOARD_DFU_BUTTON_LED 117
	29	#define BOARD_LCD_POWER 111
	30	#define BOARD_BACK_LIGHT 112
	31	#define BOARD_TOUCH_POWER 57
	32
	33	/* Physical Memory Map */
	34	#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
	35
	36	/* I2C Configuration */
	37	#define CONFIG_SYS_I2C_SPEED 400000
	38	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	39
	40
	41	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
	42
	43	#undef CONFIG_SPL_NET_SUPPORT
	44	#undef CONFIG_SPL_NET_VCI_STRING
	45	#undef CONFIG_SPL_ETH_SUPPORT
	46
c0dcece7 HS	47	#define CONFIG_PHY_ATHEROS
	48
	49	#define CONFIG_FACTORYSET
	50
	51	/* UBI Support */
	52	#ifndef CONFIG_SPL_BUILD
	53	#define CONFIG_CMD_MTDPARTS
	54	#define CONFIG_MTD_PARTITIONS
	55	#define CONFIG_MTD_DEVICE
	56	#define CONFIG_RBTREE
	57	#define CONFIG_LZO
	58	#define CONFIG_CMD_UBI
	59	#define CONFIG_CMD_UBIFS
	60	#endif
	61
	62	/* Watchdog */
	63	#define CONFIG_OMAP_WATCHDOG
	64
	65	#ifndef CONFIG_SPL_BUILD
	66
	67	/* Default env settings */
	68	#define CONFIG_EXTRA_ENV_SETTINGS \
	69	"hostname=pxm2\0" \
	70	"nand_img_size=0x500000\0" \
	71	"optargs=\0" \
56eb3da4	72	"splashpos=m,m\0" \
c0dcece7 HS	73	CONFIG_COMMON_ENV_SETTINGS \
	74	"mmc_dev=0\0" \
	75	"mmc_root=/dev/mmcblk0p2 rw\0" \
	76	"mmc_root_fs_type=ext4 rootwait\0" \
	77	"mmc_load_uimage=" \
	78	"mmc rescan; " \
	79	"setenv bootfile uImage;" \
	80	"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	81	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	82	"importbootenv=echo Importing environment from mmc ...; " \
	83	"env import -t $loadaddr $filesize\0" \
	84	"mmc_args=run bootargs_defaults;" \
	85	"mtdparts default;" \
	86	"setenv bootargs ${bootargs} " \
	87	"root=${mmc_root} ${mtdparts}" \
	88	"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
	89	"eth=${ethaddr} " \
	90	"\0" \
	91	"mmc_boot=run mmc_args; " \
	92	"run mmc_load_uimage; " \
	93	"bootm ${kloadaddr}\0" \
	94	""
	95
	96	#ifndef CONFIG_RESTORE_FLASH
	97	/* set to negative value for no autoboot */
	98	#define CONFIG_BOOTDELAY 3
	99
	100	#define CONFIG_BOOTCOMMAND \
	101	"if dfubutton; then " \
	102	"run dfu_start; " \
	103	"reset; " \
	104	"fi; " \
	105	"if mmc rescan; then " \
	106	"echo SD/MMC found on device ${mmc_dev};" \
	107	"if run loadbootenv; then " \
	108	"echo Loaded environment from ${bootenv};" \
	109	"run importbootenv;" \
	110	"fi;" \
	111	"if test -n $uenvcmd; then " \
	112	"echo Running uenvcmd ...;" \
	113	"run uenvcmd;" \
	114	"fi;" \
	115	"if run mmc_load_uimage; then " \
	116	"run mmc_args;" \
	117	"bootm ${kloadaddr};" \
	118	"fi;" \
	119	"fi;" \
	120	"run nand_boot;" \
56eb3da4	121	"reset;"
c0dcece7 HS	122
	123	#else
	124	#define CONFIG_BOOTDELAY 0
	125
	126	#define CONFIG_BOOTCOMMAND \
	127	"setenv autoload no; " \
	128	"dhcp; " \
	129	"if tftp 80000000 debrick.scr; then " \
	130	"source 80000000; " \
	131	"fi"
	132	#endif
	133	#endif /* CONFIG_SPL_BUILD */
	134
	135	#define CONFIG_VIDEO
	136	#if defined(CONFIG_VIDEO)
	137	#define CONFIG_VIDEO_DA8XX
	138	#define CONFIG_CFB_CONSOLE
	139	#define CONFIG_VGA_AS_SINGLE_DEVICE
	140	#define CONFIG_SPLASH_SCREEN
	141	#define CONFIG_SPLASH_SCREEN_ALIGN
	142	#define CONFIG_VIDEO_LOGO
	143	#define CONFIG_VIDEO_BMP_RLE8
	144	#define CONFIG_VIDEO_BMP_LOGO
	145	#define CONFIG_CMD_BMP
	146	#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
	147	#define PWM_TICKS 0x1388
	148	#define PWM_DUTY 0x200
56eb3da4 SE	149	#define CONFIG_SYS_CONSOLE_BG_COL 0xff
56eb3da4 SE	150	#define CONFIG_SYS_CONSOLE_FG_COL 0x00
c0dcece7 HS	151	#endif
	152
	153	#endif /* ! __CONFIG_PXM2_H */