[people/ms/u-boot.git] / include / configs / qemu-mips64.h

/*
 * (C) Copyright 2003
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * This file contains the configuration parameters for qemu-mips64 target.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_QEMU_MIPS

#define CONFIG_MISC_INIT_R

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"addmisc=setenv bootargs ${bootargs} "				\
		"console=ttyS0,${baudrate} "				\
		"panic=1\0"						\
	"bootfile=/tftpboot/vmlinux\0"					\
	"load=tftp ffffffff80500000 ${u-boot}\0"			\
	""

#define CONFIG_BOOTCOMMAND	"bootp;bootelf"

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE

/*
 * Command line configuration.
 */

#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_NE2000_BASE	0xffffffffb4000300

#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		115200
#define CONFIG_SYS_NS16550_COM1		0xffffffffb40003f8
#define CONFIG_CONS_INDEX		1

#ifdef CONFIG_SYS_BIG_ENDIAN
#define CONFIG_IDE_SWAP_IO
#endif

#define CONFIG_SYS_IDE_MAXBUS		2
#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
#define CONFIG_SYS_ATA_DATA_OFFSET	0
#define CONFIG_SYS_ATA_REG_OFFSET	0
#define CONFIG_SYS_ATA_BASE_ADDR	0xffffffffb4000000

#define CONFIG_SYS_IDE_MAXDEVICE	4

/*
 * Miscellaneous configurable options
 */

#define CONFIG_SYS_MALLOC_LEN		(256 << 10)

#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024

#define CONFIG_SYS_MHZ			132

#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)

/* Cached addr */
#define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000

/* default load address */
#define CONFIG_SYS_LOAD_ADDR		0xffffffff81000000

#define CONFIG_SYS_MEMTEST_START	0xffffffff80100000
#define CONFIG_SYS_MEMTEST_END		0xffffffff80800000

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
/* The following #defines are needed to get flash environment right */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_INIT_SP_OFFSET	0x400000

/* We boot from this flash, selected with dip switch */
#define CONFIG_SYS_FLASH_BASE		0xffffffffbfc00000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	128
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

/* Address and size of Primary Environment Sector */
#define CONFIG_ENV_SIZE		0x8000
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)

#define CONFIG_ENV_OVERWRITE	1

#define MEM_SIZE		128

#endif /* __CONFIG_H */
Commit	Line	Data
32afad78 ZZ	1	/*
	2	* (C) Copyright 2003
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
32afad78 ZZ	6	*/
	7
	8	/*
	9	* This file contains the configuration parameters for qemu-mips64 target.
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
32afad78	15	#define CONFIG_QEMU_MIPS
bdb53cf0	16
32afad78 ZZ	17	#define CONFIG_MISC_INIT_R
32afad78 ZZ	18
32afad78	19	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
32afad78 ZZ	20
	21	#define CONFIG_EXTRA_ENV_SETTINGS \
	22	"addmisc=setenv bootargs ${bootargs} " \
	23	"console=ttyS0,${baudrate} " \
	24	"panic=1\0" \
	25	"bootfile=/tftpboot/vmlinux\0" \
	26	"load=tftp ffffffff80500000 ${u-boot}\0" \
	27	""
	28
	29	#define CONFIG_BOOTCOMMAND "bootp;bootelf"
	30
	31	/*
	32	* BOOTP options
	33	*/
	34	#define CONFIG_BOOTP_BOOTFILESIZE
32afad78 ZZ	35
	36	/*
	37	* Command line configuration.
	38	*/
32afad78 ZZ	39
	40	#define CONFIG_DRIVER_NE2000
	41	#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300
	42
32afad78 ZZ	43	#define CONFIG_SYS_NS16550_SERIAL
	44	#define CONFIG_SYS_NS16550_REG_SIZE 1
	45	#define CONFIG_SYS_NS16550_CLK 115200
	46	#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8
	47	#define CONFIG_CONS_INDEX 1
	48
713a9e15 SG	49	#ifdef CONFIG_SYS_BIG_ENDIAN
	50	#define CONFIG_IDE_SWAP_IO
	51	#endif
	52
32afad78 ZZ	53	#define CONFIG_SYS_IDE_MAXBUS 2
	54	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
	55	#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
	56	#define CONFIG_SYS_ATA_DATA_OFFSET 0
	57	#define CONFIG_SYS_ATA_REG_OFFSET 0
	58	#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000
	59
	60	#define CONFIG_SYS_IDE_MAXDEVICE 4
	61
32afad78 ZZ	62	/*
	63	* Miscellaneous configurable options
	64	*/
32afad78	65
1967228b	66	#define CONFIG_SYS_MALLOC_LEN (256 << 10)
32afad78 ZZ	67
	68	#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
	69
	70	#define CONFIG_SYS_MHZ 132
	71
	72	#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
	73
32afad78 ZZ	74	/* Cached addr */
	75	#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
	76
	77	/* default load address */
	78	#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000
	79
	80	#define CONFIG_SYS_MEMTEST_START 0xffffffff80100000
	81	#define CONFIG_SYS_MEMTEST_END 0xffffffff80800000
	82
	83	/*-----------------------------------------------------------------------
	84	* FLASH and environment organization
	85	*/
	86	/* The following #defines are needed to get flash environment right */
32afad78	87	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
32afad78 ZZ	88
	89	#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
	90
	91	/* We boot from this flash, selected with dip switch */
	92	#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000
	93	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	94	#define CONFIG_SYS_MAX_FLASH_SECT 128
	95	#define CONFIG_SYS_FLASH_CFI
	96	#define CONFIG_FLASH_CFI_DRIVER
	97	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	98
32afad78 ZZ	99	/* Address and size of Primary Environment Sector */
32afad78 ZZ	100	#define CONFIG_ENV_SIZE 0x8000
9828d050	101	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
32afad78 ZZ	102
	103	#define CONFIG_ENV_OVERWRITE 1
	104
	105	#define MEM_SIZE 128
	106
32afad78	107	#endif /* __CONFIG_H */