projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 75238f23 WY |
1 | /* |
| 2 | * Configuration file for the SAMA5D2 Xplained Board. | |
| 3 | * | |
| 4 | * Copyright (C) 2015 Atmel Corporation | |
| 5 | * Wenyou Yang <wenyou.yang@atmel.com> | |
| 6 | * | |
| 7 | * SPDX-License-Identifier: GPL-2.0+ | |
| 8 | */ | |
| 9 | ||
| 10 | #ifndef __CONFIG_H | |
| 11 | #define __CONFIG_H | |
| 12 | ||
| 13 | /* No NOR flash, this definition should put before common header */ | |
| 14 | #define CONFIG_SYS_NO_FLASH | |
| 15 | ||
| 16 | #include "at91-sama5_common.h" | |
| 17 | ||
| 18 | /* serial console */ | |
| 19 | #define CONFIG_ATMEL_USART | |
| 20 | #define CONFIG_USART_BASE ATMEL_BASE_UART1 | |
| 21 | #define CONFIG_USART_ID ATMEL_ID_UART1 | |
| 22 | ||
| 23 | /* SDRAM */ | |
| 24 | #define CONFIG_NR_DRAM_BANKS 1 | |
| 25 | #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS | |
| 26 | #define CONFIG_SYS_SDRAM_SIZE 0x20000000 | |
| 27 | ||
| 37dadbca WY |
28 | #ifdef CONFIG_SPL_BUILD |
| 29 | #define CONFIG_SYS_INIT_SP_ADDR 0x210000 | |
| 30 | #else | |
| 75238f23 WY |
31 | #define CONFIG_SYS_INIT_SP_ADDR \ |
| 32 | (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) | |
| 37dadbca | 33 | #endif |
| 75238f23 WY |
34 | |
| 35 | #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ | |
| 36 | ||
| 37 | #undef CONFIG_AT91_GPIO | |
| 38 | #define CONFIG_ATMEL_PIO4 | |
| 39 | ||
| 40 | /* SerialFlash */ | |
| 41 | #ifdef CONFIG_CMD_SF | |
| 42 | #define CONFIG_ATMEL_SPI | |
| 43 | #define CONFIG_ATMEL_SPI0 | |
| 44 | #define CONFIG_SPI_FLASH_ATMEL | |
| 45 | #define CONFIG_SF_DEFAULT_BUS 0 | |
| 46 | #define CONFIG_SF_DEFAULT_CS 0 | |
| 47 | #define CONFIG_SF_DEFAULT_SPEED 30000000 | |
| 48 | #endif | |
| 49 | ||
| 50 | /* NAND flash */ | |
| 51 | #undef CONFIG_CMD_NAND | |
| 52 | ||
| 53 | /* MMC */ | |
| 75238f23 WY |
54 | |
| 55 | #ifdef CONFIG_CMD_MMC | |
| 56 | #define CONFIG_MMC | |
| 57 | #define CONFIG_GENERIC_MMC | |
| 58 | #define CONFIG_SDHCI | |
| 59 | #define CONFIG_ATMEL_SDHCI | |
| 60 | #define CONFIG_ATMEL_SDHCI0 | |
| 61 | #define CONFIG_ATMEL_SDHCI1 | |
| 62 | #define CONFIG_SUPPORT_EMMC_BOOT | |
| 63 | #endif | |
| 64 | ||
| 65 | /* USB */ | |
| 75238f23 WY |
66 | |
| 67 | #ifdef CONFIG_CMD_USB | |
| 68 | #define CONFIG_USB_EHCI | |
| 69 | #define CONFIG_USB_EHCI_ATMEL | |
| 70 | #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 | |
| 75238f23 WY |
71 | #endif |
| 72 | ||
| 73 | /* USB device */ | |
| 75238f23 WY |
74 | #define CONFIG_USB_ETHER |
| 75 | #define CONFIG_USB_ETH_RNDIS | |
| 76 | #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2 XPlained" | |
| 77 | ||
| 78 | #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) | |
| 75238f23 WY |
79 | #define CONFIG_DOS_PARTITION |
| 80 | #endif | |
| 81 | ||
| 82 | /* Ethernet Hardware */ | |
| 83 | #define CONFIG_MACB | |
| 84 | #define CONFIG_RMII | |
| 85 | #define CONFIG_NET_RETRY_COUNT 20 | |
| 86 | #define CONFIG_MACB_SEARCH_PHY | |
| 87 | ||
| 88 | /* LCD */ | |
| 89 | /* #define CONFIG_LCD */ | |
| 90 | ||
| 91 | #ifdef CONFIG_LCD | |
| 92 | #define LCD_BPP LCD_COLOR16 | |
| 93 | #define LCD_OUTPUT_BPP 24 | |
| 94 | #define CONFIG_LCD_LOGO | |
| 95 | #define CONFIG_LCD_INFO | |
| 96 | #define CONFIG_LCD_INFO_BELOW_LOGO | |
| 97 | #define CONFIG_SYS_WHITE_ON_BLACK | |
| 98 | #define CONFIG_ATMEL_HLCD | |
| 99 | #define CONFIG_ATMEL_LCD_RGB565 | |
| 100 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
| 101 | #endif | |
| 102 | ||
| 103 | #ifdef CONFIG_SYS_USE_MMC | |
| 104 | ||
| 105 | /* bootstrap + u-boot + env in sd card */ | |
| 106 | #undef FAT_ENV_DEVICE_AND_PART | |
| 107 | #undef CONFIG_BOOTCOMMAND | |
| 108 | ||
| 109 | #define FAT_ENV_DEVICE_AND_PART "1" | |
| 110 | #define CONFIG_BOOTCOMMAND "fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \ | |
| 111 | "fatload mmc 1:1 0x22000000 zImage; " \ | |
| 112 | "bootz 0x22000000 - 0x21000000" | |
| 113 | #undef CONFIG_BOOTARGS | |
| 114 | #define CONFIG_BOOTARGS \ | |
| 115 | "console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" | |
| 116 | ||
| 117 | #endif | |
| 118 | ||
| 37dadbca WY |
119 | /* SPL */ |
| 120 | #define CONFIG_SPL_FRAMEWORK | |
| 121 | #define CONFIG_SPL_TEXT_BASE 0x200000 | |
| 122 | #define CONFIG_SPL_MAX_SIZE 0x10000 | |
| 123 | #define CONFIG_SPL_BSS_START_ADDR 0x20000000 | |
| 124 | #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 | |
| 125 | #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 | |
| 126 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 | |
| 127 | ||
| 37dadbca WY |
128 | #define CONFIG_SPL_BOARD_INIT |
| 129 | #define CONFIG_SYS_MONITOR_LEN (512 << 10) | |
| 130 | ||
| 131 | #ifdef CONFIG_SYS_USE_MMC | |
| 132 | #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds | |
| 37dadbca WY |
133 | #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 |
| 134 | #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 | |
| 135 | #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 | |
| 136 | #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" | |
| 37dadbca WY |
137 | |
| 138 | #elif CONFIG_SYS_USE_SERIALFLASH | |
| 139 | #define CONFIG_SPL_SPI_SUPPORT | |
| 37dadbca WY |
140 | #define CONFIG_SPL_SPI_LOAD |
| 141 | #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 | |
| 142 | ||
| 143 | #endif | |
| 144 | ||
| 75238f23 | 145 | #endif |