[people/ms/u-boot.git] / include / configs / sbc8641d.h

/*
 * Copyright 2007 Wind River Systems <www.windriver.com>
 * Copyright 2007 Embedded Specialties, Inc.
 * Joe Hamman <joe.hamman@embeddedspecialties.com>
 *
 * Copyright 2006 Freescale Semiconductor.
 *
 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * SBC8641D board configuration file
 *
 * Make sure you change the MAC address and other network params first,
 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_MPC86xx		1	/* MPC86xx */
#define CONFIG_MPC8641		1	/* MPC8641 specific */
#define CONFIG_SBC8641D		1	/* SBC8641D board specific */
#define CONFIG_NUM_CPUS         2       /* Number of CPUs in the system */
#define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */

#ifdef RUN_DIAG
#define CFG_DIAG_ADDR        0xff800000
#endif

#define CFG_RESET_ADDRESS    0xfff00100

#define CONFIG_PCI		1	/* Enable PCIE */
#define CONFIG_PCI1		1	/* PCIE controler 1 (slot 1) */
#define CONFIG_PCI2		1	/* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

#define CONFIG_TSEC_ENET		/* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE

#undef CONFIG_SPD_EEPROM		/* Do not use SPD EEPROM for DDR setup*/
#undef CONFIG_DDR_DLL			/* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
#define CONFIG_NUM_DDR_CONTROLLERS     2
#define CACHE_LINE_INTERLEAVING		0x20000000
#define PAGE_INTERLEAVING		0x21000000
#define BANK_INTERLEAVING		0x22000000
#define SUPER_BANK_INTERLEAVING		0x23000000


#define CONFIG_ALTIVEC          1

/*
 * L2CR setup -- make sure this is right for your board!
 */
#define CFG_L2
#define L2_INIT		0
#define L2_ENABLE	(L2CR_L2E)

#ifndef CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
#endif

#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */

#undef	CFG_DRAM_TEST				/* memory test, takes time */
#define CFG_MEMTEST_START	0x00200000	/* memtest region */
#define CFG_MEMTEST_END		0x00400000

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
#define CFG_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */

#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
#define CFG_PCI2_ADDR		(CFG_CCSRBAR+0x9000)

/*
 * DDR Setup
 */
#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory */
#define CFG_DDR_SDRAM_BASE2	0x10000000	/* DDR bank 2 */
#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
#define CFG_SDRAM_BASE2		CFG_DDR_SDRAM_BASE2
#define CONFIG_VERY_BIG_RAM

#define MPC86xx_DDR_SDRAM_CLK_CNTL

#if defined(CONFIG_SPD_EEPROM)
    /*
     * Determine DDR configuration from I2C interface.
     */
    #define SPD_EEPROM_ADDRESS1		0x51		/* DDR DIMM */
    #define SPD_EEPROM_ADDRESS2		0x52		/* DDR DIMM */
    #define SPD_EEPROM_ADDRESS3		0x53		/* DDR DIMM */
    #define SPD_EEPROM_ADDRESS4		0x54		/* DDR DIMM */

#else
    /*
     * Manually set up DDR1 & DDR2 parameters
     */

    #define CFG_SDRAM_SIZE	512		/* DDR is 512MB */

    #define CFG_DDR_CS0_BNDS	0x0000000F
    #define CFG_DDR_CS1_BNDS	0x00000000
    #define CFG_DDR_CS2_BNDS	0x00000000
    #define CFG_DDR_CS3_BNDS	0x00000000
    #define CFG_DDR_CS0_CONFIG	0x80010102
    #define CFG_DDR_CS1_CONFIG	0x00000000
    #define CFG_DDR_CS2_CONFIG	0x00000000
    #define CFG_DDR_CS3_CONFIG	0x00000000
    #define CFG_DDR_TIMING_3 0x00000000
    #define CFG_DDR_TIMING_0	0x00220802
    #define CFG_DDR_TIMING_1	0x38377322
    #define CFG_DDR_TIMING_2	0x002040c7
    #define CFG_DDR_CFG_1A	0x43008008
    #define CFG_DDR_CFG_2	0x24401000
    #define CFG_DDR_MODE_1	0x23c00542
    #define CFG_DDR_MODE_2	0x00000000
    #define CFG_DDR_MODE_CTL	0x00000000
    #define CFG_DDR_INTERVAL	0x05080100
    #define CFG_DDR_DATA_INIT	0x00000000
    #define CFG_DDR_CLK_CTRL	0x03800000
    #define CFG_DDR_CFG_1B	0xC3008008

    #define CFG_DDR2_CS0_BNDS	0x0010001F
    #define CFG_DDR2_CS1_BNDS	0x00000000
    #define CFG_DDR2_CS2_BNDS	0x00000000
    #define CFG_DDR2_CS3_BNDS	0x00000000
    #define CFG_DDR2_CS0_CONFIG	0x80010102
    #define CFG_DDR2_CS1_CONFIG	0x00000000
    #define CFG_DDR2_CS2_CONFIG	0x00000000
    #define CFG_DDR2_CS3_CONFIG	0x00000000
    #define CFG_DDR2_EXT_REFRESH 0x00000000
    #define CFG_DDR2_TIMING_0	0x00220802
    #define CFG_DDR2_TIMING_1	0x38377322
    #define CFG_DDR2_TIMING_2	0x002040c7
    #define CFG_DDR2_CFG_1A	0x43008008
    #define CFG_DDR2_CFG_2	0x24401000
    #define CFG_DDR2_MODE_1	0x23c00542
    #define CFG_DDR2_MODE_2	0x00000000
    #define CFG_DDR2_MODE_CTL	0x00000000
    #define CFG_DDR2_INTERVAL	0x05080100
    #define CFG_DDR2_DATA_INIT	0x00000000
    #define CFG_DDR2_CLK_CTRL	0x03800000
    #define CFG_DDR2_CFG_1B	0xC3008008


#endif

/* #define CFG_ID_EEPROM	1
#define ID_EEPROM_ADDR 0x57 */

/*
 * The SBC8641D contains 16MB flash space at ff000000.
 */
#define CFG_FLASH_BASE      0xff000000  /* start of FLASH 16M */

/* Flash */
#define CFG_BR0_PRELIM		0xff001001	/* port size 16bit */
#define CFG_OR0_PRELIM		0xff006e65	/* 16MB Boot Flash area */

/* 64KB EEPROM */
#define CFG_BR1_PRELIM		0xf0000801	/* port size 16bit */
#define CFG_OR1_PRELIM		0xffff6e65	/* 64K EEPROM area */

/* EPLD - User switches, board id, LEDs */
#define CFG_BR2_PRELIM		0xf1000801	/* port size 16bit */
#define CFG_OR2_PRELIM		0xfff06e65	/* EPLD (switches, board ID, LEDs) area */

/* Local bus SDRAM 128MB */
#define CFG_BR3_PRELIM		0xe0001861	/* port size ?bit */
#define CFG_OR3_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (1st half) */
#define CFG_BR4_PRELIM		0xe4001861	/* port size ?bit */
#define CFG_OR4_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (2nd half) */

/* Disk on Chip (DOC) 128MB */
#define CFG_BR5_PRELIM		0xe8001001	/* port size ?bit */
#define CFG_OR5_PRELIM		0xf8006e65	/* 128MB local bus SDRAM area (2nd half) */

/* LCD */
#define CFG_BR6_PRELIM		0xf4000801	/* port size ?bit */
#define CFG_OR6_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */

/* Control logic & misc peripherals */
#define CFG_BR7_PRELIM		0xf2000801	/* port size ?bit */
#define CFG_OR7_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */

#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
#define CFG_MAX_FLASH_SECT	131		/* sectors per device */

#undef	CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */

#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_WRITE_SWAPPED_DATA
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_PROTECTION

#undef CONFIG_CLOCKS_IN_MHZ

#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK	1
#ifndef CFG_INIT_RAM_LOCK
#define CFG_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
#else
#define CFG_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
#endif
#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */

#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

#define CFG_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX     1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE    1
#define CFG_NS16550_CLK		get_bus_freq(0)

#define CFG_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef  CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif

/*
 * Pass open firmware flat tree to kernel
 */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1
#define CONFIG_OF_STDOUT_VIA_ALIAS	1

#define CFG_64BIT_VSPRINTF	1
#define CFG_64BIT_STRTOUL	1

/*
 * I2C
 */
#define	CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define	CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE		0x7F
#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
#define CFG_I2C_OFFSET		0x3100

/*
 * RapidIO MMU
 */
#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */

/*
 * General PCI
 * Addresses are mapped 1-1.
 */
#define CFG_PCI1_MEM_BASE	0x80000000
#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCI1_IO_BASE	0xe2000000
#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */

/* PCI view of System Memory */
#define CFG_PCI_MEMORY_BUS      0x00000000
#define CFG_PCI_MEMORY_PHYS     0x00000000
#define CFG_PCI_MEMORY_SIZE     0x80000000

#define CFG_PCI2_MEM_BASE	0xa0000000
#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
#define CFG_PCI2_IO_BASE	0xe3000000
#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */

#if defined(CONFIG_PCI)

#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */

#undef CFG_SCSI_SCAN_BUS_REVERSE

#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#undef CONFIG_EEPRO100
#undef CONFIG_TULIP

#if !defined(CONFIG_PCI_PNP)
    #define PCI_ENET0_IOADDR	0xe0000000
    #define PCI_ENET0_MEMADDR	0xe0000000
    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
#endif

#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */

#define CONFIG_DOS_PARTITION
#undef CONFIG_SCSI_AHCI

#ifdef CONFIG_SCSI_AHCI
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID	4
#define CFG_SCSI_MAX_LUN	1
#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
#endif

#endif	/* CONFIG_PCI */

#if defined(CONFIG_TSEC_ENET)

#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI	1
#endif

/* #define CONFIG_MII		1 */	/* MII PHY management */

#define CONFIG_TSEC1    1
#define CONFIG_TSEC1_NAME       "eTSEC1"
#define CONFIG_TSEC2    1
#define CONFIG_TSEC2_NAME       "eTSEC2"
#define CONFIG_TSEC3    1
#define CONFIG_TSEC3_NAME       "eTSEC3"
#define CONFIG_TSEC4    1
#define CONFIG_TSEC4_NAME       "eTSEC4"

#define TSEC1_PHY_ADDR		0x1F
#define TSEC2_PHY_ADDR		0x00
#define TSEC3_PHY_ADDR		0x01
#define TSEC4_PHY_ADDR		0x02
#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0
#define TSEC3_PHYIDX		0
#define TSEC4_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC2_FLAGS		TSEC_GIGABIT
#define TSEC3_FLAGS		TSEC_GIGABIT
#define TSEC4_FLAGS		TSEC_GIGABIT

#define CFG_TBIPA_VALUE	0x1e	/* Set TBI address not to conflict with TSEC1_PHY_ADDR */

#define CONFIG_ETHPRIME		"eTSEC1"

#endif	/* CONFIG_TSEC_ENET */

/*
 * BAT0         2G     Cacheable, non-guarded
 * 0x0000_0000  2G     DDR
 */
#define CFG_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
#define CFG_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
#define CFG_IBAT0U	CFG_DBAT0U

/*
 * BAT1         1G     Cache-inhibited, guarded
 * 0x8000_0000  512M   PCI-Express 1 Memory
 * 0xa000_0000  512M   PCI-Express 2 Memory
 *	Changed it for operating from 0xd0000000
 */
#define CFG_DBAT1L	( CFG_PCI1_MEM_BASE | BATL_PP_RW \
			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT1U	CFG_DBAT1U

/*
 * BAT2         512M   Cache-inhibited, guarded
 * 0xc000_0000  512M   RapidIO Memory
 */
#define CFG_DBAT2L	(CFG_RIO_MEM_BASE | BATL_PP_RW \
			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT2U	(CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
#define CFG_IBAT2L	(CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT2U	CFG_DBAT2U

/*
 * BAT3         4M     Cache-inhibited, guarded
 * 0xf800_0000  4M     CCSR
 */
#define CFG_DBAT3L	( CFG_CCSRBAR | BATL_PP_RW \
			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT3U	(CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
#define CFG_IBAT3L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT3U	CFG_DBAT3U

/*
 * BAT4         32M    Cache-inhibited, guarded
 * 0xe200_0000  16M    PCI-Express 1 I/O
 * 0xe300_0000  16M    PCI-Express 2 I/0
 *    Note that this is at 0xe0000000
 */
#define CFG_DBAT4L	( CFG_PCI1_IO_BASE | BATL_PP_RW \
			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT4U	(CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_IBAT4L	(CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT4U	CFG_DBAT4U

/*
 * BAT5         128K   Cacheable, non-guarded
 * 0xe401_0000  128K   Init RAM for stack in the CPU DCache (no backing memory)
 */
#define CFG_DBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_DBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CFG_IBAT5L	CFG_DBAT5L
#define CFG_IBAT5U	CFG_DBAT5U

/*
 * BAT6         32M    Cache-inhibited, guarded
 * 0xfe00_0000  32M    FLASH
 */
#define CFG_DBAT6L	((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT6U	((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_IBAT6L	((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_IBAT6U	CFG_DBAT6U

#define CFG_DBAT7L	0x00000000
#define CFG_DBAT7U	0x00000000
#define CFG_IBAT7L	0x00000000
#define CFG_IBAT7U	0x00000000

/*
 * Environment
 */
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
#define CFG_ENV_SIZE		0x2000

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */

#include <config_cmd_default.h>
    #define CONFIG_CMD_PING
    #define CONFIG_CMD_I2C
    #define CONFIG_CMD_REGINFO

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif

#undef CONFIG_WATCHDOG			/* watchdog disabled */

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory	*/
#define CFG_LOAD_ADDR	0x2000000	/* default load address */
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */

#if defined(CONFIG_CMD_KGDB)
    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
#else
    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
#endif

#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args */
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/

/* Cache Configuration */
#define CFG_DCACHE_SIZE		32768
#define CFG_CACHELINE_SIZE	32
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
#endif

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/*
 * Environment Configuration
 */

/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR   02:E0:0C:00:00:01
#define CONFIG_ETH1ADDR  02:E0:0C:00:01:FD
#define CONFIG_ETH2ADDR  02:E0:0C:00:02:FD
#define CONFIG_ETH3ADDR  02:E0:0C:00:03:FD
#endif

#define CONFIG_HAS_ETH0		1
#define CONFIG_HAS_ETH1		1
#define CONFIG_HAS_ETH2		1
#define CONFIG_HAS_ETH3		1

#define CONFIG_IPADDR		192.168.0.50

#define CONFIG_HOSTNAME		sbc8641d
#define CONFIG_ROOTPATH		/opt/eldk/ppc_74xx
#define CONFIG_BOOTFILE		uImage

#define CONFIG_SERVERIP		192.168.0.2
#define CONFIG_GATEWAYIP	192.168.0.1
#define CONFIG_NETMASK		255.255.255.0

/* default location for tftp and bootm */
#define CONFIG_LOADADDR		1000000

#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */

#define CONFIG_BAUDRATE	115200

#define	CONFIG_EXTRA_ENV_SETTINGS					\
   "netdev=eth0\0"							\
   "consoledev=ttyS0\0"							\
   "ramdiskaddr=2000000\0"						\
   "ramdiskfile=uRamdisk\0"						\
   "dtbaddr=400000\0"							\
   "dtbfile=sbc8641d.dtb\0"						\
   "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0"	\
   "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0"	\
   "maxcpus=1"

#define CONFIG_NFSBOOTCOMMAND						\
   "setenv bootargs root=/dev/nfs rw "					\
      "nfsroot=$serverip:$rootpath "					\
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $loadaddr $bootfile;"						\
   "tftp $dtbaddr $dtbfile;"						\
   "bootm $loadaddr - $dtbaddr"

#define CONFIG_RAMBOOTCOMMAND						\
   "setenv bootargs root=/dev/ram rw "					\
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $ramdiskaddr $ramdiskfile;"					\
   "tftp $loadaddr $bootfile;"						\
   "tftp $dtbaddr $dtbfile;"						\
   "bootm $loadaddr $ramdiskaddr $dtbaddr"

#define CONFIG_FLASHBOOTCOMMAND						\
   "setenv bootargs root=/dev/ram rw "					\
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "bootm ffd00000 ffb00000 ffa00000"

#define CONFIG_BOOTCOMMAND  CONFIG_FLASHBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
c646bba6 JH	1	/*
	2	* Copyright 2007 Wind River Systems <www.windriver.com>
	3	* Copyright 2007 Embedded Specialties, Inc.
	4	* Joe Hamman <joe.hamman@embeddedspecialties.com>
	5	*
	6	* Copyright 2006 Freescale Semiconductor.
	7	*
	8	* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
	9	*
	10	* See file CREDITS for list of people who contributed to this
	11	* project.
	12	*
	13	* This program is free software; you can redistribute it and/or
	14	* modify it under the terms of the GNU General Public License as
	15	* published by the Free Software Foundation; either version 2 of
	16	* the License, or (at your option) any later version.
	17	*
	18	* This program is distributed in the hope that it will be useful,
	19	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	20	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	21	* GNU General Public License for more details.
	22	*
	23	* You should have received a copy of the GNU General Public License
	24	* along with this program; if not, write to the Free Software
	25	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	26	* MA 02111-1307 USA
	27	*/
	28
	29	/*
	30	* SBC8641D board configuration file
	31	*
	32	* Make sure you change the MAC address and other network params first,
	33	* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
	34	*/
	35
	36	#ifndef __CONFIG_H
	37	#define __CONFIG_H
	38
	39	/* High Level Configuration Options */
	40	#define CONFIG_MPC86xx 1 /* MPC86xx */
	41	#define CONFIG_MPC8641 1 /* MPC8641 specific */
	42	#define CONFIG_SBC8641D 1 /* SBC8641D board specific */
	43	#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */
	44	#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
	45
	46	#ifdef RUN_DIAG
	47	#define CFG_DIAG_ADDR 0xff800000
	48	#endif
	49
	50	#define CFG_RESET_ADDRESS 0xfff00100
	51
cca34967 JH	52	#define CONFIG_PCI 1 /* Enable PCIE */
	53	#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */
	54	#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */
	55	#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
713d8186	56	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
c646bba6	57
53677ef1	58	#define CONFIG_TSEC_ENET /* tsec ethernet support */
c646bba6 JH	59	#define CONFIG_ENV_OVERWRITE
	60
	61	#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/
	62	#undef CONFIG_DDR_DLL /* possible DLL fix needed */
	63	#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
53677ef1	64	#undef CONFIG_DDR_ECC /* only for ECC DDR module */
c646bba6 JH	65	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
	66	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	67	#define CONFIG_NUM_DDR_CONTROLLERS 2
	68	#define CACHE_LINE_INTERLEAVING 0x20000000
	69	#define PAGE_INTERLEAVING 0x21000000
	70	#define BANK_INTERLEAVING 0x22000000
	71	#define SUPER_BANK_INTERLEAVING 0x23000000
	72
	73
	74	#define CONFIG_ALTIVEC 1
	75
	76	/*
	77	* L2CR setup -- make sure this is right for your board!
	78	*/
	79	#define CFG_L2
	80	#define L2_INIT 0
	81	#define L2_ENABLE (L2CR_L2E)
	82
	83	#ifndef CONFIG_SYS_CLK_FREQ
	84	#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
	85	#endif
	86
	87	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
	88
	89	#undef CFG_DRAM_TEST /* memory test, takes time */
	90	#define CFG_MEMTEST_START 0x00200000 /* memtest region */
	91	#define CFG_MEMTEST_END 0x00400000
	92
	93	/*
	94	* Base addresses -- Note these are effective addresses where the
	95	* actual resources get mapped (not physical addresses)
	96	*/
53677ef1	97	#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
c646bba6 JH	98	#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
	99	#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
	100
cca34967 JH	101	#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
	102	#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
	103
c646bba6 JH	104	/*
	105	* DDR Setup
	106	*/
	107	#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
	108	#define CFG_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */
	109	#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
	110	#define CFG_SDRAM_BASE2 CFG_DDR_SDRAM_BASE2
	111	#define CONFIG_VERY_BIG_RAM
	112
	113	#define MPC86xx_DDR_SDRAM_CLK_CNTL
	114
	115	#if defined(CONFIG_SPD_EEPROM)
	116	/*
	117	* Determine DDR configuration from I2C interface.
	118	*/
	119	#define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */
	120	#define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */
	121	#define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */
	122	#define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */
	123
	124	#else
	125	/*
	126	* Manually set up DDR1 & DDR2 parameters
	127	*/
	128
	129	#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
	130
	131	#define CFG_DDR_CS0_BNDS 0x0000000F
	132	#define CFG_DDR_CS1_BNDS 0x00000000
	133	#define CFG_DDR_CS2_BNDS 0x00000000
	134	#define CFG_DDR_CS3_BNDS 0x00000000
	135	#define CFG_DDR_CS0_CONFIG 0x80010102
	136	#define CFG_DDR_CS1_CONFIG 0x00000000
	137	#define CFG_DDR_CS2_CONFIG 0x00000000
	138	#define CFG_DDR_CS3_CONFIG 0x00000000
45239cf4	139	#define CFG_DDR_TIMING_3 0x00000000
c646bba6 JH	140	#define CFG_DDR_TIMING_0 0x00220802
	141	#define CFG_DDR_TIMING_1 0x38377322
	142	#define CFG_DDR_TIMING_2 0x002040c7
	143	#define CFG_DDR_CFG_1A 0x43008008
	144	#define CFG_DDR_CFG_2 0x24401000
	145	#define CFG_DDR_MODE_1 0x23c00542
	146	#define CFG_DDR_MODE_2 0x00000000
	147	#define CFG_DDR_MODE_CTL 0x00000000
	148	#define CFG_DDR_INTERVAL 0x05080100
	149	#define CFG_DDR_DATA_INIT 0x00000000
	150	#define CFG_DDR_CLK_CTRL 0x03800000
	151	#define CFG_DDR_CFG_1B 0xC3008008
	152
	153	#define CFG_DDR2_CS0_BNDS 0x0010001F
	154	#define CFG_DDR2_CS1_BNDS 0x00000000
	155	#define CFG_DDR2_CS2_BNDS 0x00000000
	156	#define CFG_DDR2_CS3_BNDS 0x00000000
	157	#define CFG_DDR2_CS0_CONFIG 0x80010102
	158	#define CFG_DDR2_CS1_CONFIG 0x00000000
	159	#define CFG_DDR2_CS2_CONFIG 0x00000000
	160	#define CFG_DDR2_CS3_CONFIG 0x00000000
	161	#define CFG_DDR2_EXT_REFRESH 0x00000000
	162	#define CFG_DDR2_TIMING_0 0x00220802
	163	#define CFG_DDR2_TIMING_1 0x38377322
	164	#define CFG_DDR2_TIMING_2 0x002040c7
	165	#define CFG_DDR2_CFG_1A 0x43008008
	166	#define CFG_DDR2_CFG_2 0x24401000
	167	#define CFG_DDR2_MODE_1 0x23c00542
	168	#define CFG_DDR2_MODE_2 0x00000000
	169	#define CFG_DDR2_MODE_CTL 0x00000000
	170	#define CFG_DDR2_INTERVAL 0x05080100
	171	#define CFG_DDR2_DATA_INIT 0x00000000
	172	#define CFG_DDR2_CLK_CTRL 0x03800000
	173	#define CFG_DDR2_CFG_1B 0xC3008008
	174
	175
	176	#endif
	177
	178	/* #define CFG_ID_EEPROM 1
	179	#define ID_EEPROM_ADDR 0x57 */
	180
	181	/*
	182	* The SBC8641D contains 16MB flash space at ff000000.
	183	*/
	184	#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */
	185
	186	/* Flash */
	187	#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */
	188	#define CFG_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */
	189
	190	/* 64KB EEPROM */
	191	#define CFG_BR1_PRELIM 0xf0000801 /* port size 16bit */
	192	#define CFG_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */
	193
	194	/* EPLD - User switches, board id, LEDs */
	195	#define CFG_BR2_PRELIM 0xf1000801 /* port size 16bit */
	196	#define CFG_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */
	197
	198	/* Local bus SDRAM 128MB */
	199	#define CFG_BR3_PRELIM 0xe0001861 /* port size ?bit */
	200	#define CFG_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */
	201	#define CFG_BR4_PRELIM 0xe4001861 /* port size ?bit */
	202	#define CFG_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */
	203
204	/* Disk on Chip (DOC) 128MB */
205	#define CFG_BR5_PRELIM 0xe8001001 /* port size ?bit */
206	#define CFG_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */
207
208	/* LCD */
209	#define CFG_BR6_PRELIM 0xf4000801 /* port size ?bit */
210	#define CFG_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */
211
212	/* Control logic & misc peripherals */
213	#define CFG_BR7_PRELIM 0xf2000801 /* port size ?bit */
214	#define CFG_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */
215
216	#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
217	#define CFG_MAX_FLASH_SECT 131 /* sectors per device */
218
219	#undef CFG_FLASH_CHECKSUM
220	#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
221	#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
53677ef1	222	#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
c646bba6 JH	223
	224	#define CFG_FLASH_CFI_DRIVER
	225	#define CFG_FLASH_CFI
	226	#define CFG_WRITE_SWAPPED_DATA
	227	#define CFG_FLASH_EMPTY_INFO
	228	#define CFG_FLASH_PROTECTION
	229
	230	#undef CONFIG_CLOCKS_IN_MHZ
	231
	232	#define CONFIG_L1_INIT_RAM
	233	#define CFG_INIT_RAM_LOCK 1
	234	#ifndef CFG_INIT_RAM_LOCK
	235	#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */
	236	#else
	237	#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */
	238	#endif
53677ef1	239	#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
c646bba6	240
53677ef1	241	#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
c646bba6 JH	242	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	243	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	244
53677ef1 WD	245	#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
53677ef1 WD	246	#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
c646bba6 JH	247
	248	/* Serial Port */
	249	#define CONFIG_CONS_INDEX 1
	250	#undef CONFIG_SERIAL_SOFTWARE_FIFO
	251	#define CFG_NS16550
	252	#define CFG_NS16550_SERIAL
	253	#define CFG_NS16550_REG_SIZE 1
	254	#define CFG_NS16550_CLK get_bus_freq(0)
	255
	256	#define CFG_BAUDRATE_TABLE \
	257	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
	258
	259	#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
	260	#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
	261
	262	/* Use the HUSH parser */
	263	#define CFG_HUSH_PARSER
	264	#ifdef CFG_HUSH_PARSER
	265	#define CFG_PROMPT_HUSH_PS2 "> "
	266	#endif
	267
	268	/*
	269	* Pass open firmware flat tree to kernel
	270	*/
13f5433f JL	271	#define CONFIG_OF_LIBFDT 1
	272	#define CONFIG_OF_BOARD_SETUP 1
	273	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
c646bba6 JH	274
	275	#define CFG_64BIT_VSPRINTF 1
	276	#define CFG_64BIT_STRTOUL 1
	277
	278	/*
	279	* I2C
	280	*/
	281	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	282	#define CONFIG_HARD_I2C /* I2C with hardware support*/
	283	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	284	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	285	#define CFG_I2C_SLAVE 0x7F
	286	#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
	287	#define CFG_I2C_OFFSET 0x3100
	288
	289	/*
	290	* RapidIO MMU
	291	*/
	292	#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
	293	#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
	294	#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
	295
	296	/*
	297	* General PCI
	298	* Addresses are mapped 1-1.
	299	*/
	300	#define CFG_PCI1_MEM_BASE 0x80000000
	301	#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
	302	#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
	303	#define CFG_PCI1_IO_BASE 0xe2000000
	304	#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
	305	#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
	306
	307	/* PCI view of System Memory */
	308	#define CFG_PCI_MEMORY_BUS 0x00000000
	309	#define CFG_PCI_MEMORY_PHYS 0x00000000
	310	#define CFG_PCI_MEMORY_SIZE 0x80000000
	311
	312	#define CFG_PCI2_MEM_BASE 0xa0000000
	313	#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
	314	#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
	315	#define CFG_PCI2_IO_BASE 0xe3000000
	316	#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
	317	#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
	318
	319	#if defined(CONFIG_PCI)
	320
	321	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	322
	323	#undef CFG_SCSI_SCAN_BUS_REVERSE
	324
	325	#define CONFIG_NET_MULTI
53677ef1	326	#define CONFIG_PCI_PNP /* do pci plug-and-play */
c646bba6 JH	327
	328	#undef CONFIG_EEPRO100
	329	#undef CONFIG_TULIP
	330
	331	#if !defined(CONFIG_PCI_PNP)
	332	#define PCI_ENET0_IOADDR 0xe0000000
	333	#define PCI_ENET0_MEMADDR 0xe0000000
53677ef1	334	#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
c646bba6 JH	335	#endif
	336
	337	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	338
	339	#define CONFIG_DOS_PARTITION
	340	#undef CONFIG_SCSI_AHCI
	341
	342	#ifdef CONFIG_SCSI_AHCI
	343	#define CONFIG_SATA_ULI5288
	344	#define CFG_SCSI_MAX_SCSI_ID 4
	345	#define CFG_SCSI_MAX_LUN 1
53677ef1	346	#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
c646bba6 JH	347	#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
	348	#endif
	349
	350	#endif /* CONFIG_PCI */
	351
	352	#if defined(CONFIG_TSEC_ENET)
	353
	354	#ifndef CONFIG_NET_MULTI
53677ef1	355	#define CONFIG_NET_MULTI 1
c646bba6 JH	356	#endif
	357
	358	/* #define CONFIG_MII 1 / / MII PHY management */
	359
	360	#define CONFIG_TSEC1 1
	361	#define CONFIG_TSEC1_NAME "eTSEC1"
	362	#define CONFIG_TSEC2 1
	363	#define CONFIG_TSEC2_NAME "eTSEC2"
	364	#define CONFIG_TSEC3 1
	365	#define CONFIG_TSEC3_NAME "eTSEC3"
	366	#define CONFIG_TSEC4 1
	367	#define CONFIG_TSEC4_NAME "eTSEC4"
	368
	369	#define TSEC1_PHY_ADDR 0x1F
	370	#define TSEC2_PHY_ADDR 0x00
	371	#define TSEC3_PHY_ADDR 0x01
	372	#define TSEC4_PHY_ADDR 0x02
	373	#define TSEC1_PHYIDX 0
	374	#define TSEC2_PHYIDX 0
	375	#define TSEC3_PHYIDX 0
	376	#define TSEC4_PHYIDX 0
3a79013e AF	377	#define TSEC1_FLAGS TSEC_GIGABIT
	378	#define TSEC2_FLAGS TSEC_GIGABIT
	379	#define TSEC3_FLAGS TSEC_GIGABIT
	380	#define TSEC4_FLAGS TSEC_GIGABIT
c646bba6 JH	381
	382	#define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */
	383
	384	#define CONFIG_ETHPRIME "eTSEC1"
	385
	386	#endif /* CONFIG_TSEC_ENET */
	387
	388	/*
	389	* BAT0 2G Cacheable, non-guarded
	390	* 0x0000_0000 2G DDR
	391	*/
	392	#define CFG_DBAT0L (BATL_PP_RW \| BATL_MEMCOHERENCE)
	393	#define CFG_DBAT0U (BATU_BL_2G \| BATU_VS \| BATU_VP)
	394	#define CFG_IBAT0L (BATL_PP_RW \| BATL_MEMCOHERENCE )
	395	#define CFG_IBAT0U CFG_DBAT0U
	396
	397	/*
	398	* BAT1 1G Cache-inhibited, guarded
	399	* 0x8000_0000 512M PCI-Express 1 Memory
	400	* 0xa000_0000 512M PCI-Express 2 Memory
	401	* Changed it for operating from 0xd0000000
	402	*/
	403	#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE \| BATL_PP_RW \
	404	\| BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	405	#define CFG_DBAT1U (CFG_PCI1_MEM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)
	406	#define CFG_IBAT1L (CFG_PCI1_MEM_BASE \| BATL_PP_RW \| BATL_CACHEINHIBIT)
	407	#define CFG_IBAT1U CFG_DBAT1U
	408
	409	/*
	410	* BAT2 512M Cache-inhibited, guarded
	411	* 0xc000_0000 512M RapidIO Memory
	412	*/
	413	#define CFG_DBAT2L (CFG_RIO_MEM_BASE \| BATL_PP_RW \
	414	\| BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	415	#define CFG_DBAT2U (CFG_RIO_MEM_BASE \| BATU_BL_512M \| BATU_VS \| BATU_VP)
	416	#define CFG_IBAT2L (CFG_RIO_MEM_BASE \| BATL_PP_RW \| BATL_CACHEINHIBIT)
	417	#define CFG_IBAT2U CFG_DBAT2U
	418
	419	/*
	420	* BAT3 4M Cache-inhibited, guarded
	421	* 0xf800_0000 4M CCSR
	422	*/
	423	#define CFG_DBAT3L ( CFG_CCSRBAR \| BATL_PP_RW \
	424	\| BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	425	#define CFG_DBAT3U (CFG_CCSRBAR \| BATU_BL_4M \| BATU_VS \| BATU_VP)
	426	#define CFG_IBAT3L (CFG_CCSRBAR \| BATL_PP_RW \| BATL_CACHEINHIBIT)
	427	#define CFG_IBAT3U CFG_DBAT3U
	428
	429	/*
	430	* BAT4 32M Cache-inhibited, guarded
	431	* 0xe200_0000 16M PCI-Express 1 I/O
	432	* 0xe300_0000 16M PCI-Express 2 I/0
	433	* Note that this is at 0xe0000000
	434	*/
	435	#define CFG_DBAT4L ( CFG_PCI1_IO_BASE \| BATL_PP_RW \
	436	\| BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	437	#define CFG_DBAT4U (CFG_PCI1_IO_BASE \| BATU_BL_32M \| BATU_VS \| BATU_VP)
	438	#define CFG_IBAT4L (CFG_PCI1_IO_BASE \| BATL_PP_RW \| BATL_CACHEINHIBIT)
	439	#define CFG_IBAT4U CFG_DBAT4U
	440
	441	/*
	442	* BAT5 128K Cacheable, non-guarded
	443	* 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
	444	*/
445	#define CFG_DBAT5L (CFG_INIT_RAM_ADDR \| BATL_PP_RW \| BATL_MEMCOHERENCE)
446	#define CFG_DBAT5U (CFG_INIT_RAM_ADDR \| BATU_BL_128K \| BATU_VS \| BATU_VP)
447	#define CFG_IBAT5L CFG_DBAT5L
448	#define CFG_IBAT5U CFG_DBAT5U
449
450	/*
451	* BAT6 32M Cache-inhibited, guarded
452	* 0xfe00_0000 32M FLASH
453	*/
454	#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) \| BATL_PP_RW \
455	\| BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
456	#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) \| BATU_BL_32M \| BATU_VS \| BATU_VP)
457	#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) \| BATL_PP_RW \| BATL_MEMCOHERENCE)
458	#define CFG_IBAT6U CFG_DBAT6U
459
460	#define CFG_DBAT7L 0x00000000
461	#define CFG_DBAT7U 0x00000000
462	#define CFG_IBAT7L 0x00000000
463	#define CFG_IBAT7U 0x00000000
464
465	/*
466	* Environment
467	*/
468	#define CFG_ENV_IS_IN_FLASH 1
469	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
470	#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
471	#define CFG_ENV_SIZE 0x2000
472
473	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
474	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
475
476	#include <config_cmd_default.h>
477	#define CONFIG_CMD_PING
478	#define CONFIG_CMD_I2C
4f93f8b1	479	#define CONFIG_CMD_REGINFO
c646bba6 JH	480
	481	#if defined(CONFIG_PCI)
	482	#define CONFIG_CMD_PCI
	483	#endif
	484
	485	#undef CONFIG_WATCHDOG /* watchdog disabled */
	486
	487	/*
	488	* Miscellaneous configurable options
	489	*/
	490	#define CFG_LONGHELP /* undef to save memory */
	491	#define CFG_LOAD_ADDR 0x2000000 /* default load address */
	492	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	493
30b52df9	494	#if defined(CONFIG_CMD_KGDB)
c646bba6 JH	495	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	496	#else
	497	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	498	#endif
	499
	500	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	501	#define CFG_MAXARGS 16 /* max number of command args */
	502	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	503	#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
	504
	505	/*
	506	* For booting Linux, the board info and command line data
	507	* have to be in the first 8 MB of memory, since this is
	508	* the maximum mapped by the Linux kernel during initialization.
	509	*/
	510	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
	511
	512	/* Cache Configuration */
	513	#define CFG_DCACHE_SIZE 32768
	514	#define CFG_CACHELINE_SIZE 32
30b52df9	515	#if defined(CONFIG_CMD_KGDB)
c646bba6 JH	516	#define CFG_CACHELINE_SHIFT 5 /log base 2 of the above value/
	517	#endif
	518
	519	/*
	520	* Internal Definitions
	521	*
	522	* Boot Flags
	523	*/
	524	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	525	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	526
30b52df9	527	#if defined(CONFIG_CMD_KGDB)
c646bba6 JH	528	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	529	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	530	#endif
	531
	532	/*
	533	* Environment Configuration
	534	*/
	535
	536	/* The mac addresses for all ethernet interface */
	537	#if defined(CONFIG_TSEC_ENET)
	538	#define CONFIG_ETHADDR 02:E0:0C:00:00:01
	539	#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD
	540	#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD
	541	#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD
	542	#endif
	543
10327dc5	544	#define CONFIG_HAS_ETH0 1
c646bba6 JH	545	#define CONFIG_HAS_ETH1 1
	546	#define CONFIG_HAS_ETH2 1
	547	#define CONFIG_HAS_ETH3 1
	548
	549	#define CONFIG_IPADDR 192.168.0.50
	550
	551	#define CONFIG_HOSTNAME sbc8641d
	552	#define CONFIG_ROOTPATH /opt/eldk/ppc_74xx
	553	#define CONFIG_BOOTFILE uImage
	554
	555	#define CONFIG_SERVERIP 192.168.0.2
	556	#define CONFIG_GATEWAYIP 192.168.0.1
	557	#define CONFIG_NETMASK 255.255.255.0
	558
	559	/* default location for tftp and bootm */
	560	#define CONFIG_LOADADDR 1000000
	561
	562	#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
	563	#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
	564
	565	#define CONFIG_BAUDRATE 115200
	566
	567	#define CONFIG_EXTRA_ENV_SETTINGS \
	568	"netdev=eth0\0" \
	569	"consoledev=ttyS0\0" \
	570	"ramdiskaddr=2000000\0" \
	571	"ramdiskfile=uRamdisk\0" \
	572	"dtbaddr=400000\0" \
	573	"dtbfile=sbc8641d.dtb\0" \
	574	"en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
	575	"dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
	576	"maxcpus=1"
	577
	578	#define CONFIG_NFSBOOTCOMMAND \
	579	"setenv bootargs root=/dev/nfs rw " \
	580	"nfsroot=$serverip:$rootpath " \
	581	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	582	"console=$consoledev,$baudrate $othbootargs;" \
	583	"tftp $loadaddr $bootfile;" \
	584	"tftp $dtbaddr $dtbfile;" \
	585	"bootm $loadaddr - $dtbaddr"
	586
	587	#define CONFIG_RAMBOOTCOMMAND \
	588	"setenv bootargs root=/dev/ram rw " \
	589	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	590	"console=$consoledev,$baudrate $othbootargs;" \
	591	"tftp $ramdiskaddr $ramdiskfile;" \
	592	"tftp $loadaddr $bootfile;" \
	593	"tftp $dtbaddr $dtbfile;" \
	594	"bootm $loadaddr $ramdiskaddr $dtbaddr"
	595
	596	#define CONFIG_FLASHBOOTCOMMAND \
	597	"setenv bootargs root=/dev/ram rw " \
	598	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	599	"console=$consoledev,$baudrate $othbootargs;" \
	600	"bootm ffd00000 ffb00000 ffa00000"
	601
	602	#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND
	603
	604	#endif /* __CONFIG_H */