[people/ms/u-boot.git] / include / configs / socfpga_common.h

/*
 * Copyright (C) 2012 Altera Corporation <www.altera.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__

#define CONFIG_SYS_GENERIC_BOARD

/* Virtual target or real hardware */
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET

#define CONFIG_SYS_THUMB_BUILD

#define CONFIG_SOCFPGA

/*
 * High level configuration
 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CLOCKS

#define CONFIG_FIT
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_BOOTMAPSZ		(64 * 1024 * 1024)

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

/*
 * Memory configurations
 */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM_1			0x0
#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE

#define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
#define CONFIG_SYS_INIT_RAM_SIZE	(0x10000 - 0x100)
#define CONFIG_SYS_INIT_SP_ADDR					\
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE -	\
	GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TEXT_BASE		0x08000040
#else
#define CONFIG_SYS_TEXT_BASE		0x01000040
#endif

/*
 * U-Boot general configurations
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
#define CONFIG_SYS_PBSIZE	\
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
						/* Print buffer size */
#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
						/* Boot argument buffer size */
#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
#define CONFIG_CMDLINE_EDITING			/* Command history etc */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Cache
 */
#define CONFIG_SYS_ARM_CACHE_WRITEALLOC
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS

/*
 * EPCS/EPCQx1 Serial Flash Controller
 */
#ifdef CONFIG_ALTERA_SPI
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED		30000000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_BAR
/*
 * The base address is configurable in QSys, each board must specify the
 * base address based on it's particular FPGA configuration. Please note
 * that the address here is incremented by  0x400  from the Base address
 * selected in QSys, since the SPI registers are at offset +0x400.
 * #define CONFIG_SYS_SPI_BASE		0xff240400
 */
#endif

/*
 * Ethernet on SoC (EMAC)
 */
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_NET_MULTI
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_AUTONEG_TIMEOUT		(15 * CONFIG_SYS_HZ)
#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
#endif

/*
 * FPGA Driver
 */
#ifdef CONFIG_CMD_FPGA
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_SOCFPGA
#define CONFIG_FPGA_COUNT		1
#endif

/*
 * L4 OSC1 Timer 0
 */
/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
#define CONFIG_SYS_TIMERBASE		SOCFPGA_OSC1TIMER0_ADDRESS
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TIMER_RATE		2400000
#else
#define CONFIG_SYS_TIMER_RATE		25000000
#endif

/*
 * L4 Watchdog
 */
#ifdef CONFIG_HW_WATCHDOG
#define CONFIG_DESIGNWARE_WATCHDOG
#define CONFIG_DW_WDT_BASE		SOCFPGA_L4WD0_ADDRESS
#define CONFIG_DW_WDT_CLOCK_KHZ		25000
#define CONFIG_HW_WATCHDOG_TIMEOUT_MS	12000
#endif

/*
 * MMC Driver
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_GENERIC_MMC
#define CONFIG_DWMMC
#define CONFIG_SOCFPGA_DWMMC
#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH	1024
#define CONFIG_SOCFPGA_DWMMC_DRVSEL	3
#define CONFIG_SOCFPGA_DWMMC_SMPSEL	0
/* FIXME */
/* using smaller max blk cnt to avoid flooding the limited stack we have */
#define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
#endif

 /*
 * I2C support
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_DW
#define CONFIG_SYS_I2C_BUS_MAX		4
#define CONFIG_SYS_I2C_BASE		SOCFPGA_I2C0_ADDRESS
#define CONFIG_SYS_I2C_BASE1		SOCFPGA_I2C1_ADDRESS
#define CONFIG_SYS_I2C_BASE2		SOCFPGA_I2C2_ADDRESS
#define CONFIG_SYS_I2C_BASE3		SOCFPGA_I2C3_ADDRESS
/* Using standard mode which the speed up to 100Kb/s */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SPEED1		100000
#define CONFIG_SYS_I2C_SPEED2		100000
#define CONFIG_SYS_I2C_SPEED3		100000
/* Address of device when used as slave */
#define CONFIG_SYS_I2C_SLAVE		0x02
#define CONFIG_SYS_I2C_SLAVE1		0x02
#define CONFIG_SYS_I2C_SLAVE2		0x02
#define CONFIG_SYS_I2C_SLAVE3		0x02
#ifndef __ASSEMBLY__
/* Clock supplied to I2C controller in unit of MHz */
unsigned int cm_get_l4_sp_clk_hz(void);
#define IC_CLK				(cm_get_l4_sp_clk_hz() / 1000000)
#endif
#define CONFIG_CMD_I2C

/*
 * Serial Driver
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	-4
#define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_NS16550_CLK		1000000
#else
#define CONFIG_SYS_NS16550_CLK		100000000
#endif
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/*
 * USB
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_STORAGE
/*
 * NOTE: User must define either of the following to select which
 *       of the two USB controllers available on SoCFPGA to use.
 *       The DWC2 driver doesn't support multiple USB controllers.
 * #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB0_ADDRESS
 * #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
 */
#endif

/*
 * USB Gadget (DFU, UMS)
 */
#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW	2

/* USB Composite download gadget - g_dnl */
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_MASS_STORAGE

#define CONFIG_DFU_FUNCTION
#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(32 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT	300

/* USB IDs */
#define CONFIG_G_DNL_VENDOR_NUM		0x0525	/* NetChip */
#define CONFIG_G_DNL_PRODUCT_NUM	0xA4A5	/* Linux-USB File-backed Storage Gadget */
#define CONFIG_G_DNL_UMS_VENDOR_NUM	CONFIG_G_DNL_VENDOR_NUM
#define CONFIG_G_DNL_UMS_PRODUCT_NUM	CONFIG_G_DNL_PRODUCT_NUM
#ifndef CONFIG_G_DNL_MANUFACTURER
#define CONFIG_G_DNL_MANUFACTURER	"Altera"
#endif
#endif

/*
 * U-Boot environment
 */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE			4096

/*
 * SPL
 *
 * SRAM Memory layout:
 *
 * 0xFFFF_0000 ...... Start of SRAM
 * 0xFFFF_xxxx ...... Top of stack (grows down)
 * 0xFFFF_yyyy ...... Malloc area
 * 0xFFFF_zzzz ...... Global Data
 * 0xFFFF_FF00 ...... End of SRAM
 */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
#define CONFIG_SYS_SPL_MALLOC_START	CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SYS_SPL_MALLOC_SIZE	(5 * 1024)

#define CHUNKSZ_CRC32			(1 * 1024)	/* FIXME: ewww */
#define CONFIG_CRC32_VERIFY

/* Linker script for SPL */
#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT

#ifdef CONFIG_SPL_BUILD
#undef CONFIG_PARTITIONS
#endif

#endif	/* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */
Commit	Line	Data
5095ee08 PM	1	/*
	2	* Copyright (C) 2012 Altera Corporation <www.altera.com>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6	#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
	7	#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
	8
	9	#define CONFIG_SYS_GENERIC_BOARD
	10
	11	/* Virtual target or real hardware */
	12	#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
	13
5095ee08 PM	14	#define CONFIG_SYS_THUMB_BUILD
	15
	16	#define CONFIG_SOCFPGA
	17
	18	/*
	19	* High level configuration
	20	*/
	21	#define CONFIG_DISPLAY_CPUINFO
	22	#define CONFIG_DISPLAY_BOARDINFO
	23	#define CONFIG_BOARD_EARLY_INIT_F
fc520894	24	#define CONFIG_ARCH_EARLY_INIT_R
5095ee08 PM	25	#define CONFIG_SYS_NO_FLASH
	26	#define CONFIG_CLOCKS
	27
	28	#define CONFIG_FIT
	29	#define CONFIG_OF_LIBFDT
	30	#define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024)
	31
	32	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	33
	34	/*
	35	* Memory configurations
	36	*/
	37	#define CONFIG_NR_DRAM_BANKS 1
	38	#define PHYS_SDRAM_1 0x0
0223a95c	39	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
5095ee08 PM	40	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
	41	#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
	42
	43	#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
	44	#define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100)
	45	#define CONFIG_SYS_INIT_SP_ADDR \
	46	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - \
	47	GENERATED_GBL_DATA_SIZE)
	48
	49	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	50	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	51	#define CONFIG_SYS_TEXT_BASE 0x08000040
	52	#else
	53	#define CONFIG_SYS_TEXT_BASE 0x01000040
	54	#endif
	55
	56	/*
	57	* U-Boot general configurations
	58	*/
	59	#define CONFIG_SYS_LONGHELP
	60	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	61	#define CONFIG_SYS_PBSIZE \
	62	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	63	/* Print buffer size */
	64	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
	65	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	66	/* Boot argument buffer size */
	67	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	68	#define CONFIG_AUTO_COMPLETE /* Command auto complete */
	69	#define CONFIG_CMDLINE_EDITING /* Command history etc */
	70	#define CONFIG_SYS_HUSH_PARSER
	71
	72	/*
	73	* Cache
	74	*/
	75	#define CONFIG_SYS_ARM_CACHE_WRITEALLOC
	76	#define CONFIG_SYS_CACHELINE_SIZE 32
	77	#define CONFIG_SYS_L2_PL310
	78	#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
	79
8a78ca9e MV	80	/*
	81	* EPCS/EPCQx1 Serial Flash Controller
	82	*/
	83	#ifdef CONFIG_ALTERA_SPI
	84	#define CONFIG_CMD_SPI
	85	#define CONFIG_CMD_SF
	86	#define CONFIG_SF_DEFAULT_SPEED 30000000
	87	#define CONFIG_SPI_FLASH
	88	#define CONFIG_SPI_FLASH_STMICRO
	89	#define CONFIG_SPI_FLASH_BAR
	90	/*
	91	* The base address is configurable in QSys, each board must specify the
	92	* base address based on it's particular FPGA configuration. Please note
	93	* that the address here is incremented by 0x400 from the Base address
	94	* selected in QSys, since the SPI registers are at offset +0x400.
	95	* #define CONFIG_SYS_SPI_BASE 0xff240400
	96	*/
	97	#endif
	98
5095ee08 PM	99	/*
	100	* Ethernet on SoC (EMAC)
	101	*/
	102	#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
	103	#define CONFIG_DESIGNWARE_ETH
	104	#define CONFIG_NET_MULTI
	105	#define CONFIG_DW_ALTDESCRIPTOR
	106	#define CONFIG_MII
	107	#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
	108	#define CONFIG_PHYLIB
	109	#define CONFIG_PHY_GIGE
	110	#endif
	111
	112	/*
	113	* FPGA Driver
	114	*/
	115	#ifdef CONFIG_CMD_FPGA
	116	#define CONFIG_FPGA
	117	#define CONFIG_FPGA_ALTERA
	118	#define CONFIG_FPGA_SOCFPGA
	119	#define CONFIG_FPGA_COUNT 1
	120	#endif
	121
	122	/*
	123	* L4 OSC1 Timer 0
	124	*/
	125	/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
	126	#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
	127	#define CONFIG_SYS_TIMER_COUNTS_DOWN
	128	#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
	129	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	130	#define CONFIG_SYS_TIMER_RATE 2400000
	131	#else
	132	#define CONFIG_SYS_TIMER_RATE 25000000
	133	#endif
	134
	135	/*
	136	* L4 Watchdog
	137	*/
	138	#ifdef CONFIG_HW_WATCHDOG
	139	#define CONFIG_DESIGNWARE_WATCHDOG
	140	#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
	141	#define CONFIG_DW_WDT_CLOCK_KHZ 25000
	142	#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 12000
	143	#endif
	144
	145	/*
	146	* MMC Driver
	147	*/
	148	#ifdef CONFIG_CMD_MMC
	149	#define CONFIG_MMC
	150	#define CONFIG_BOUNCE_BUFFER
	151	#define CONFIG_GENERIC_MMC
	152	#define CONFIG_DWMMC
	153	#define CONFIG_SOCFPGA_DWMMC
	154	#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
	155	#define CONFIG_SOCFPGA_DWMMC_DRVSEL 3
	156	#define CONFIG_SOCFPGA_DWMMC_SMPSEL 0
	157	/* FIXME */
	158	/* using smaller max blk cnt to avoid flooding the limited stack we have */
	159	#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
	160	#endif
	161
ebcaf966 SR	162	/*
	163	* I2C support
	164	*/
	165	#define CONFIG_SYS_I2C
	166	#define CONFIG_SYS_I2C_DW
	167	#define CONFIG_SYS_I2C_BUS_MAX 4
	168	#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS
	169	#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS
	170	#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS
	171	#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS
	172	/* Using standard mode which the speed up to 100Kb/s */
	173	#define CONFIG_SYS_I2C_SPEED 100000
	174	#define CONFIG_SYS_I2C_SPEED1 100000
	175	#define CONFIG_SYS_I2C_SPEED2 100000
	176	#define CONFIG_SYS_I2C_SPEED3 100000
	177	/* Address of device when used as slave */
	178	#define CONFIG_SYS_I2C_SLAVE 0x02
	179	#define CONFIG_SYS_I2C_SLAVE1 0x02
	180	#define CONFIG_SYS_I2C_SLAVE2 0x02
	181	#define CONFIG_SYS_I2C_SLAVE3 0x02
	182	#ifndef __ASSEMBLY__
	183	/* Clock supplied to I2C controller in unit of MHz */
	184	unsigned int cm_get_l4_sp_clk_hz(void);
	185	#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000)
	186	#endif
	187	#define CONFIG_CMD_I2C
	188
5095ee08 PM	189	/*
	190	* Serial Driver
	191	*/
	192	#define CONFIG_SYS_NS16550
	193	#define CONFIG_SYS_NS16550_SERIAL
	194	#define CONFIG_SYS_NS16550_REG_SIZE -4
	195	#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
	196	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	197	#define CONFIG_SYS_NS16550_CLK 1000000
	198	#else
	199	#define CONFIG_SYS_NS16550_CLK 100000000
	200	#endif
	201	#define CONFIG_CONS_INDEX 1
	202	#define CONFIG_BAUDRATE 115200
	203
20cadbbe MV	204	/*
	205	* USB
	206	*/
	207	#ifdef CONFIG_CMD_USB
	208	#define CONFIG_USB_DWC2
	209	#define CONFIG_USB_STORAGE
	210	/*
	211	* NOTE: User must define either of the following to select which
	212	* of the two USB controllers available on SoCFPGA to use.
	213	* The DWC2 driver doesn't support multiple USB controllers.
	214	* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS
	215	* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
	216	*/
	217	#endif
	218
0223a95c MV	219	/*
	220	* USB Gadget (DFU, UMS)
	221	*/
	222	#if defined(CONFIG_CMD_DFU) \|\| defined(CONFIG_CMD_USB_MASS_STORAGE)
	223	#define CONFIG_USB_GADGET
	224	#define CONFIG_USB_GADGET_S3C_UDC_OTG
	225	#define CONFIG_USB_GADGET_DUALSPEED
	226	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	227
	228	/* USB Composite download gadget - g_dnl */
	229	#define CONFIG_USBDOWNLOAD_GADGET
	230	#define CONFIG_USB_GADGET_MASS_STORAGE
	231
	232	#define CONFIG_DFU_FUNCTION
	233	#define CONFIG_DFU_MMC
	234	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
	235	#define DFU_DEFAULT_POLL_TIMEOUT 300
	236
	237	/* USB IDs */
	238	#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */
	239	#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */
	240	#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
	241	#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM
	242	#ifndef CONFIG_G_DNL_MANUFACTURER
	243	#define CONFIG_G_DNL_MANUFACTURER "Altera"
	244	#endif
	245	#endif
	246
5095ee08 PM	247	/*
	248	* U-Boot environment
	249	*/
	250	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	251	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	252	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
	253	#define CONFIG_ENV_IS_NOWHERE
	254	#define CONFIG_ENV_SIZE 4096
	255
	256	/*
	257	* SPL
34584d19 MV	258	*
	259	* SRAM Memory layout:
	260	*
	261	* 0xFFFF_0000 ...... Start of SRAM
	262	* 0xFFFF_xxxx ...... Top of stack (grows down)
	263	* 0xFFFF_yyyy ...... Malloc area
	264	* 0xFFFF_zzzz ...... Global Data
	265	* 0xFFFF_FF00 ...... End of SRAM
5095ee08 PM	266	*/
	267	#define CONFIG_SPL_FRAMEWORK
	268	#define CONFIG_SPL_BOARD_INIT
	269	#define CONFIG_SPL_RAM_DEVICE
34584d19 MV	270	#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
	271	#define CONFIG_SYS_SPL_MALLOC_START CONFIG_SYS_INIT_SP_ADDR
	272	#define CONFIG_SYS_SPL_MALLOC_SIZE (5 * 1024)
5095ee08 PM	273
	274	#define CHUNKSZ_CRC32 (1 * 1024) /* FIXME: ewww */
	275	#define CONFIG_CRC32_VERIFY
	276
	277	/* Linker script for SPL */
	278	#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"
	279
	280	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	281	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	282	#define CONFIG_SPL_WATCHDOG_SUPPORT
	283	#define CONFIG_SPL_SERIAL_SUPPORT
	284
	285	#ifdef CONFIG_SPL_BUILD
	286	#undef CONFIG_PARTITIONS
	287	#endif
	288
	289	#endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */