[people/ms/u-boot.git] / include / configs / stm32f429-discovery.h

/*
 * (C) Copyright 2015
 * Kamil Lulko, <rev13@wp.pl>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_STM32F4
#define CONFIG_STM32F4DISCOVERY
#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_OF_LIBFDT

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_SYS_FLASH_BASE		0x08000000

#define CONFIG_SYS_INIT_SP_ADDR		0x10010000
#define CONFIG_SYS_TEXT_BASE		0x08000000

#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF

/*
 * Configuration of the external SDRAM memory
 */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_RAM_SIZE		(8 << 20)
#define CONFIG_SYS_RAM_CS		1
#define CONFIG_SYS_RAM_FREQ_DIV		2
#define CONFIG_SYS_RAM_BASE		0xD0000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_RAM_BASE
#define CONFIG_SYS_LOAD_ADDR		0xD0400000
#define CONFIG_LOADADDR			0xD0400000

#define CONFIG_SYS_MAX_FLASH_SECT	12
#define CONFIG_SYS_MAX_FLASH_BANKS	2

#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OFFSET		(256 << 10)
#define CONFIG_ENV_SECT_SIZE		(128 << 10)
#define CONFIG_ENV_SIZE			(8 << 10)

#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_RED_LED			110
#define CONFIG_GREEN_LED		109

#define CONFIG_STM32_GPIO
#define CONFIG_STM32_SERIAL
/*
 * Configuration of the USART
 * 1:   TX:PA9  PX:PA10
 * 2:   TX:PD5  RX:PD6
 * 3:   TX:PC10 RX:PC11
 * 6:   TX:PC6  RX:PC7
 */
#define CONFIG_STM32_USART		1

#define CONFIG_STM32_HSE_HZ		8000000

#define CONFIG_SYS_HZ_CLOCK		1000000	/* Timer is clocked at 1MHz */

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

#define CONFIG_SYS_CBSIZE		1024
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
					+ sizeof(CONFIG_SYS_PROMPT) + 16)

#define CONFIG_SYS_MAXARGS		16

#define CONFIG_SYS_MALLOC_LEN		(2 << 20)

#define CONFIG_STACKSIZE		(64 << 10)

#define CONFIG_BAUDRATE			115200
#define CONFIG_BOOTARGS							\
	"console=ttystm0,115200 earlyprintk consoleblank=0 ignore_loglevel"
#define CONFIG_BOOTCOMMAND						\
	"run bootcmd_romfs"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
	"bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
	"bootm 0x08044000 - 0x08042000\0"

#define CONFIG_BOOTDELAY		3
#define CONFIG_AUTOBOOT

/*
 * Command line configuration.
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT	       "U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING

#define CONFIG_CMD_MEM
#define CONFIG_CMD_TIMER

#endif /* __CONFIG_H */
Commit	Line	Data
ed09a554	1	/*
	2	* (C) Copyright 2015
	3	* Kamil Lulko, <rev13@wp.pl>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	#define CONFIG_STM32F4
	12	#define CONFIG_STM32F4DISCOVERY
	13	#define CONFIG_SYS_GENERIC_BOARD
	14
	15	#define CONFIG_OF_LIBFDT
	16
	17	#define CONFIG_BOARD_EARLY_INIT_F
	18
	19	#define CONFIG_SYS_FLASH_BASE 0x08000000
	20
	21	#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
	22	#define CONFIG_SYS_TEXT_BASE 0x08000000
	23
	24	#define CONFIG_SYS_ICACHE_OFF
	25	#define CONFIG_SYS_DCACHE_OFF
	26
	27	/*
	28	* Configuration of the external SDRAM memory
	29	*/
	30	#define CONFIG_NR_DRAM_BANKS 1
	31	#define CONFIG_SYS_RAM_SIZE (8 << 20)
	32	#define CONFIG_SYS_RAM_CS 1
	33	#define CONFIG_SYS_RAM_FREQ_DIV 2
	34	#define CONFIG_SYS_RAM_BASE 0xD0000000
	35	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
	36	#define CONFIG_SYS_LOAD_ADDR 0xD0400000
	37	#define CONFIG_LOADADDR 0xD0400000
	38
	39	#define CONFIG_SYS_MAX_FLASH_SECT 12
	40	#define CONFIG_SYS_MAX_FLASH_BANKS 2
	41
	42	#define CONFIG_ENV_IS_IN_FLASH
	43	#define CONFIG_ENV_OFFSET (256 << 10)
	44	#define CONFIG_ENV_SECT_SIZE (128 << 10)
	45	#define CONFIG_ENV_SIZE (8 << 10)
	46
	47	#define CONFIG_BOARD_SPECIFIC_LED
	48	#define CONFIG_RED_LED 110
	49	#define CONFIG_GREEN_LED 109
	50
	51	#define CONFIG_STM32_GPIO
	52	#define CONFIG_STM32_SERIAL
60570df1	53	/*
	54	* Configuration of the USART
	55	* 1: TX:PA9 PX:PA10
	56	* 2: TX:PD5 RX:PD6
	57	* 3: TX:PC10 RX:PC11
	58	* 6: TX:PC6 RX:PC7
	59	*/
	60	#define CONFIG_STM32_USART 1
ed09a554	61
	62	#define CONFIG_STM32_HSE_HZ 8000000
	63
	64	#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
	65
	66	#define CONFIG_CMDLINE_TAG
	67	#define CONFIG_SETUP_MEMORY_TAGS
	68	#define CONFIG_INITRD_TAG
	69	#define CONFIG_REVISION_TAG
	70
	71	#define CONFIG_SYS_CBSIZE 1024
	72	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
	73	+ sizeof(CONFIG_SYS_PROMPT) + 16)
	74
	75	#define CONFIG_SYS_MAXARGS 16
	76
	77	#define CONFIG_SYS_MALLOC_LEN (2 << 20)
	78
	79	#define CONFIG_STACKSIZE (64 << 10)
	80
	81	#define CONFIG_BAUDRATE 115200
	82	#define CONFIG_BOOTARGS \
	83	"console=ttystm0,115200 earlyprintk consoleblank=0 ignore_loglevel"
	84	#define CONFIG_BOOTCOMMAND \
	85	"run bootcmd_romfs"
	86
	87	#define CONFIG_EXTRA_ENV_SETTINGS \
	88	"bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
	89	"bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
	90	"bootm 0x08044000 - 0x08042000\0"
	91
	92	#define CONFIG_BOOTDELAY 3
	93	#define CONFIG_AUTOBOOT
	94
	95	/*
	96	* Command line configuration.
	97	*/
ed09a554	98	#define CONFIG_SYS_LONGHELP
	99	#define CONFIG_SYS_HUSH_PARSER
	100	#define CONFIG_SYS_PROMPT "U-Boot > "
	101	#define CONFIG_AUTO_COMPLETE
	102	#define CONFIG_CMDLINE_EDITING
	103
ed09a554	104	#define CONFIG_CMD_MEM
ed09a554	105	#define CONFIG_CMD_TIMER
	106
	107	#endif /* __CONFIG_H */