]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/stm32f746-disco.h
Merge git://www.denx.de/git/u-boot-marvell
[people/ms/u-boot.git] / include / configs / stm32f746-disco.h
CommitLineData
e66c49fa
VM
1/*
2 * (C) Copyright 2016
3 * Vikas Manocha, <vikas.manocha@st.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11#define CONFIG_SYS_THUMB_BUILD
adcc90b4 12/*#define CONFIG_SYS_NO_FLASH*/
e66c49fa 13
e66c49fa
VM
14#define CONFIG_SYS_FLASH_BASE 0x08000000
15#define CONFIG_SYS_INIT_SP_ADDR 0x20050000
16#define CONFIG_SYS_TEXT_BASE 0x08000000
17
18#define CONFIG_SYS_ICACHE_OFF
19#define CONFIG_SYS_DCACHE_OFF
20
21/*
22 * Configuration of the external SDRAM memory
23 */
24#define CONFIG_NR_DRAM_BANKS 1
25c1b135 25#define CONFIG_SYS_RAM_SIZE (8 * 1024 * 1024)
e66c49fa
VM
26#define CONFIG_SYS_RAM_CS 1
27#define CONFIG_SYS_RAM_FREQ_DIV 2
25c1b135 28#define CONFIG_SYS_RAM_BASE 0xC0000000
e66c49fa 29#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
25c1b135
TN
30#define CONFIG_SYS_LOAD_ADDR 0xC0400000
31#define CONFIG_LOADADDR 0xC0400000
e66c49fa 32
adcc90b4
VM
33#define CONFIG_SYS_MAX_FLASH_SECT 8
34#define CONFIG_SYS_MAX_FLASH_BANKS 1
e66c49fa 35
e66c49fa 36#define CONFIG_ENV_IS_NOWHERE
e66c49fa
VM
37#define CONFIG_ENV_SIZE (8 << 10)
38
39#define CONFIG_STM32_GPIO
adcc90b4 40#define CONFIG_STM32_FLASH
e66c49fa
VM
41#define CONFIG_STM32X7_SERIAL
42
ba0a3c16
TN
43#define CONFIG_STM32_HSE_HZ 25000000
44#define CONFIG_SYS_CLK_FREQ 200000000 /* 200 MHz */
e66c49fa
VM
45#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
46
47#define CONFIG_CMDLINE_TAG
48#define CONFIG_SETUP_MEMORY_TAGS
49#define CONFIG_INITRD_TAG
50#define CONFIG_REVISION_TAG
51
52#define CONFIG_SYS_CBSIZE 1024
53#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
54 + sizeof(CONFIG_SYS_PROMPT) + 16)
55
56#define CONFIG_SYS_MAXARGS 16
57#define CONFIG_SYS_MALLOC_LEN (16 * 1024)
58#define CONFIG_STACKSIZE (64 << 10)
59
60#define CONFIG_BAUDRATE 115200
61#define CONFIG_BOOTARGS \
62 "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
63#define CONFIG_BOOTCOMMAND \
64 "run bootcmd_romfs"
65
66#define CONFIG_EXTRA_ENV_SETTINGS \
67 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
68 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
69 "bootm 0x08044000 - 0x08042000\0"
70
e66c49fa
VM
71
72/*
73 * Command line configuration.
74 */
75#define CONFIG_SYS_LONGHELP
e66c49fa
VM
76#define CONFIG_AUTO_COMPLETE
77#define CONFIG_CMDLINE_EDITING
78
79#define CONFIG_CMD_MEM
e66c49fa 80#endif /* __CONFIG_H */