[people/ms/u-boot.git] / include / configs / tb100.h

/*
 * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_TB100_H_
#define _CONFIG_TB100_H_

#include <linux/sizes.h>

/*
 * Memory configuration
 */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE		SZ_128M

#define CONFIG_SYS_INIT_SP_ADDR		\
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_MALLOC_LEN		SZ_128K
#define CONFIG_SYS_BOOTM_LEN		SZ_32M
#define CONFIG_SYS_LOAD_ADDR		0x82000000

/*
 * UART configuration
 */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK		166666666

/*
 * Even though the board houses Realtek RTL8211E PHY
 * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
 * In particular "parse_status" reports link is down.
 *
 * Until Realtek PHY driver is fixed fall back to generic PHY driver
 * which implements all required functionality and behaves much more stable.
 *
 * #define CONFIG_PHY_REALTEK
 *
 */

/*
 * Ethernet configuration
 */
#define ETH0_BASE_ADDRESS		0xFE100000
#define ETH1_BASE_ADDRESS		0xFE110000

/*
 * Command line configuration
 */

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_CMDLINE_EDITING

/*
 * Environment settings
 */
#define CONFIG_ENV_SIZE			SZ_2K
#define CONFIG_ENV_OFFSET		0

/*
 * Environment configuration
 */
#define CONFIG_BOOTFILE			"uImage"
#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR

/*
 * Console configuration
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
						sizeof(CONFIG_SYS_PROMPT) + 16)

#endif /* _CONFIG_TB100_H_ */
Commit	Line	Data
7f6a6db6 AB	1	/*
	2	* Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_TB100_H_
	8	#define _CONFIG_TB100_H_
	9
	10	#include <linux/sizes.h>
	11
7f6a6db6 AB	12	/*
	13	* Memory configuration
	14	*/
7f6a6db6 AB	15	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	16
	17	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
	18	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	19	#define CONFIG_SYS_SDRAM_SIZE SZ_128M
	20
	21	#define CONFIG_SYS_INIT_SP_ADDR \
	22	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
	23
	24	#define CONFIG_SYS_MALLOC_LEN SZ_128K
	25	#define CONFIG_SYS_BOOTM_LEN SZ_32M
	26	#define CONFIG_SYS_LOAD_ADDR 0x82000000
	27
7f6a6db6 AB	28	/*
	29	* UART configuration
	30	*/
7f6a6db6	31	#define CONFIG_SYS_NS16550_SERIAL
7f6a6db6	32	#define CONFIG_SYS_NS16550_CLK 166666666
7f6a6db6	33
7f6a6db6 AB	34	/*
	35	* Even though the board houses Realtek RTL8211E PHY
	36	* corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
	37	* In particular "parse_status" reports link is down.
	38	*
	39	* Until Realtek PHY driver is fixed fall back to generic PHY driver
	40	* which implements all required functionality and behaves much more stable.
	41	*
	42	* #define CONFIG_PHY_REALTEK
	43	*
	44	*/
	45
	46	/*
	47	* Ethernet configuration
	48	*/
7f6a6db6 AB	49	#define ETH0_BASE_ADDRESS 0xFE100000
	50	#define ETH1_BASE_ADDRESS 0xFE110000
	51
	52	/*
	53	* Command line configuration
	54	*/
7f6a6db6	55
7f6a6db6 AB	56	#define CONFIG_AUTO_COMPLETE
7f6a6db6 AB	57	#define CONFIG_SYS_MAXARGS 16
06bd1d7f	58	#define CONFIG_CMDLINE_EDITING
7f6a6db6 AB	59
	60	/*
	61	* Environment settings
	62	*/
7f6a6db6 AB	63	#define CONFIG_ENV_SIZE SZ_2K
	64	#define CONFIG_ENV_OFFSET 0
	65
	66	/*
	67	* Environment configuration
	68	*/
7f6a6db6	69	#define CONFIG_BOOTFILE "uImage"
7f6a6db6 AB	70	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
	71
	72	/*
	73	* Console configuration
	74	*/
	75	#define CONFIG_SYS_LONGHELP
7f6a6db6 AB	76	#define CONFIG_SYS_CBSIZE 256
	77	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	78	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	79	sizeof(CONFIG_SYS_PROMPT) + 16)
	80
	81	#endif /* _CONFIG_TB100_H_ */