[people/ms/u-boot.git] / include / configs / tegra186-common.h

/*
 * Copyright 2013-2016, NVIDIA CORPORATION.
 *
 * SPDX-License-Identifier: GPL-2.0
 */

#ifndef _TEGRA186_COMMON_H_
#define _TEGRA186_COMMON_H_

#include "tegra-common.h"

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */

/* Generic Interrupt Controller */
#define CONFIG_GICV2

/*
 * Memory layout for where various images get loaded by boot scripts:
 *
 * scriptaddr can be pretty much anywhere that doesn't conflict with something
 *   else. Put it above BOOTMAPSZ to eliminate conflicts.
 *
 * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
 *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
 *
 * kernel_addr_r must be within the first 128M of RAM in order for the
 *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
 *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
 *   should not overlap that area, or the kernel will have to copy itself
 *   somewhere else before decompression. Similarly, the address of any other
 *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
 *   this up to 16M allows for a sizable kernel to be decompressed below the
 *   compressed load address.
 *
 * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
 *   the compressed kernel to be up to 16M too.
 *
 * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
 *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
 */
#define CONFIG_LOADADDR 0x80080000
#define MEM_LAYOUT_ENV_SETTINGS \
	"scriptaddr=0x90000000\0" \
	"pxefile_addr_r=0x90100000\0" \
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"fdt_addr_r=0x82000000\0" \
	"ramdisk_addr_r=0x82100000\0"

#endif
Commit	Line	Data
c7ba99c8 SW	1	/*
	2	* Copyright 2013-2016, NVIDIA CORPORATION.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0
	5	*/
	6
	7	#ifndef _TEGRA186_COMMON_H_
	8	#define _TEGRA186_COMMON_H_
	9
	10	#include "tegra-common.h"
	11
c7ba99c8 SW	12	/*
	13	* NS16550 Configuration
	14	*/
	15	#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
	16
c7ba99c8 SW	17	/*-----------------------------------------------------------------------
	18	* Physical Memory Map
	19	*/
	20
c7ba99c8 SW	21	/* Generic Interrupt Controller */
	22	#define CONFIG_GICV2
	23
	24	/*
	25	* Memory layout for where various images get loaded by boot scripts:
	26	*
	27	* scriptaddr can be pretty much anywhere that doesn't conflict with something
	28	* else. Put it above BOOTMAPSZ to eliminate conflicts.
	29	*
	30	* pxefile_addr_r can be pretty much anywhere that doesn't conflict with
	31	* something else. Put it above BOOTMAPSZ to eliminate conflicts.
	32	*
	33	* kernel_addr_r must be within the first 128M of RAM in order for the
	34	* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
	35	* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
	36	* should not overlap that area, or the kernel will have to copy itself
	37	* somewhere else before decompression. Similarly, the address of any other
	38	* data passed to the kernel shouldn't overlap the start of RAM. Pushing
	39	* this up to 16M allows for a sizable kernel to be decompressed below the
	40	* compressed load address.
	41	*
	42	* fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
	43	* the compressed kernel to be up to 16M too.
	44	*
	45	* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
	46	* for the FDT/DTB to be up to 1M, which is hopefully plenty.
	47	*/
	48	#define CONFIG_LOADADDR 0x80080000
	49	#define MEM_LAYOUT_ENV_SETTINGS \
	50	"scriptaddr=0x90000000\0" \
	51	"pxefile_addr_r=0x90100000\0" \
	52	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	53	"fdt_addr_r=0x82000000\0" \
	54	"ramdisk_addr_r=0x82100000\0"
	55
c7ba99c8	56	#endif