]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/ti_am335x_common.h
configs: Re-sync with cmd/Kconfig
[people/ms/u-boot.git] / include / configs / ti_am335x_common.h
CommitLineData
87694558
TR
1/*
2 * ti_am335x_common.h
3 *
4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 *
8 * For more details, please see the technical documents listed at
9 * http://www.ti.com/product/am3359#technicaldocuments
10 */
11
12#ifndef __CONFIG_TI_AM335X_COMMON_H__
13#define __CONFIG_TI_AM335X_COMMON_H__
14
15#define CONFIG_AM33XX
87694558
TR
16#define CONFIG_ARCH_CPU_INIT
17#define CONFIG_SYS_CACHELINE_SIZE 64
18#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
19#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
16678eb4 20#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
87694558
TR
21
22#include <asm/arch/omap.h>
23
24/* NS16550 Configuration */
1a44cd89 25#ifdef CONFIG_SPL_BUILD
87694558
TR
26#define CONFIG_SYS_NS16550_SERIAL
27#define CONFIG_SYS_NS16550_REG_SIZE (-4)
1a44cd89 28#endif
87694558
TR
29#define CONFIG_SYS_NS16550_CLK 48000000
30
e77faeb7 31#ifndef CONFIG_SPL_BUILD
87694558 32/* Network defines. */
a7a06400 33#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
87694558
TR
34#define CONFIG_BOOTP_DNS2
35#define CONFIG_BOOTP_SEND_HOSTNAME
36#define CONFIG_BOOTP_GATEWAY
37#define CONFIG_BOOTP_SUBNETMASK
38#define CONFIG_NET_RETRY_COUNT 10
a7a06400 39#define CONFIG_MII /* Required in net/eth.c */
e77faeb7 40#endif
87694558 41
e77faeb7 42#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
a1c143f4
TR
43/*
44 * RTC related defines. To use bootcount you must set bootlimit in the
abcaa6ee
TR
45 * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
46 * in the board config.
a1c143f4 47 */
a1c143f4
TR
48#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
49
6843918e
TR
50/* Enable the HW watchdog, since we can use this with bootcount */
51#define CONFIG_HW_WATCHDOG
52#define CONFIG_OMAP_WATCHDOG
53
c27efde6
TR
54/*
55 * SPL related defines. The Public RAM memory map the ROM defines the
56 * area between 0x402F0400 and 0x4030B800 as a download area and
57 * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
58 * supports X-MODEM loading via UART, and we leverage this and then use
59 * Y-MODEM to load u-boot.img, when booted over UART.
60 */
87694558 61#define CONFIG_SPL_TEXT_BASE 0x402F0400
c27efde6 62#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
d3289aac
TR
63#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
64 (128 << 20))
87694558 65
6843918e
TR
66/* Enable the watchdog inside of SPL */
67#define CONFIG_SPL_WATCHDOG_SUPPORT
68
87694558
TR
69/*
70 * Since SPL did pll and ddr initialization for us,
71 * we don't need to do it twice.
72 */
73#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
74#define CONFIG_SKIP_LOWLEVEL_INIT
75#endif
76
196311dc
TR
77/*
78 * When building U-Boot such that there is no previous loader
79 * we need to call board_early_init_f. This is taken care of in
80 * s_init when we have SPL used.
81 */
82#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
83#define CONFIG_BOARD_EARLY_INIT_F
84#endif
85
70e71b61
EBS
86#ifdef CONFIG_NAND
87#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
88#endif
89
87694558 90/* Now bring in the rest of the common code. */
9a0f4004 91#include <configs/ti_armv7_omap.h>
87694558
TR
92
93#endif /* __CONFIG_TI_AM335X_COMMON_H__ */