[people/ms/u-boot.git] / include / configs / tqma6.h

/*
 * Copyright (C) 2013, 2014 Markus Niebel <Markus.Niebel@tq-group.com>
 *
 * Configuration settings for the TQ Systems TQMa6<Q,S> module.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MX6

/* SPL */
/* #if defined(CONFIG_SPL_BUILD) */

#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_EXT_SUPPORT

/* common IMX6 SPL configuration */
#include "imx6_spl.h"

/* #endif */

#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
#include <linux/sizes.h>

#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#define PHYS_SDRAM_SIZE			(512u * SZ_1M)
#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
#define PHYS_SDRAM_SIZE			(1024u * SZ_1M)
#endif

#if defined(CONFIG_MBA6)

#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#define CONFIG_DEFAULT_FDT_FILE		"imx6dl-mba6x.dtb"
#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6Q)
#define CONFIG_DEFAULT_FDT_FILE		"imx6q-mba6x.dtb"
#endif

#endif

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART

/* SPI */
#define CONFIG_CMD_SPI
#define CONFIG_MXC_SPI

/* SPI Flash */
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO

#define TQMA6_SPI_FLASH_SECTOR_SIZE	SZ_64K

#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS	0
#define CONFIG_SF_DEFAULT_CS	0
#define CONFIG_SF_DEFAULT_SPEED	50000000
#define CONFIG_SF_DEFAULT_MODE	(SPI_MODE_0)

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED		100000

/* I2C SYSMON (LM75) */
#define CONFIG_DTT_LM75
#if defined(CONFIG_MBA6)
#define CONFIG_DTT_SENSORS		{ 0, 1 }
#else
#define CONFIG_DTT_SENSORS		{ 0 }
#endif
#define CONFIG_DTT_MAX_TEMP		70
#define CONFIG_DTT_MIN_TEMP		-30
#define CONFIG_DTT_HYSTERESIS	3
#define CONFIG_CMD_DTT

/* I2C EEPROM (M24C64) */
#define CONFIG_SYS_I2C_EEPROM_ADDR			0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN			2
#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS		5 /* 32 Bytes */
#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS	20
#define CONFIG_CMD_EEPROM

#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
#define TQMA6_PFUZE100_I2C_BUS		2

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_MXC_USB_PORT	1
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* Fuses */
#define CONFIG_MXC_OCOTP
#define CONFIG_CMD_FUSE

#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET

#define CONFIG_FEC_MXC
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_PHYLIB
#define CONFIG_MII

#if defined(CONFIG_MBA6)

#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"

#define CONFIG_FEC_MXC_PHYADDR		0x03
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_KSZ9031

#else

#error "define PHY to use for your baseboard"

#endif

#define CONFIG_ARP_TIMEOUT		200UL
/* Network config - Allow larger/faster download for TFTP/NFS */
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE	4096
#define CONFIG_NFS_READ_SIZE	4096

#if defined(CONFIG_MBA6)

#define CONFIG_MXC_UART_BASE		UART2_BASE
#define CONFIG_CONSOLE_DEV		"ttymxc1"

#else

#error "define baseboard specific things (uart, number of SD-card slots)"

#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Command definition */
#include <config_cmd_default.h>

#define CONFIG_CMD_BMODE
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_ITEST
#define CONFIG_CMD_SETEXPR
#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY		3

#define CONFIG_LOADADDR			0x12000000

/* place code in last 4 MiB of RAM */
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#define CONFIG_SYS_TEXT_BASE		0x2fc00000
#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
#define CONFIG_SYS_TEXT_BASE		0x4fc00000
#endif

#define CONFIG_ENV_SIZE			(SZ_8K)
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * SZ_1M)

#if defined(CONFIG_TQMA6X_MMC_BOOT)

#define CONFIG_ENV_IS_IN_MMC
#define TQMA6_UBOOT_OFFSET		SZ_1K
#define TQMA6_UBOOT_SECTOR_START	0x2
#define TQMA6_UBOOT_SECTOR_COUNT	0x7fe

#define CONFIG_ENV_OFFSET		SZ_1M
#define CONFIG_SYS_MMC_ENV_DEV		0

#define TQMA6_FDT_OFFSET		(2 * SZ_1M)
#define TQMA6_FDT_SECTOR_START		0x1000
#define TQMA6_FDT_SECTOR_COUNT		0x800

#define TQMA6_KERNEL_SECTOR_START	0x2000
#define TQMA6_KERNEL_SECTOR_COUNT	0x2000

#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                       \
	"uboot_start="__stringify(TQMA6_UBOOT_SECTOR_START)"\0"                \
	"uboot_size="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0"                 \
	"fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0"                    \
	"fdt_size="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0"                     \
	"kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0"              \
	"kernel_size="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0"               \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0"                       \
	"loadimage=mmc dev ${mmcdev}; "                                        \
		"mmc read ${loadaddr} ${kernel_start} ${kernel_size};\0"       \
	"loadfdt=mmc dev ${mmcdev}; "                                          \
		"mmc read ${fdt_addr} ${fdt_start} ${fdt_size};\0"             \
	"update_uboot=if tftp ${uboot}; then "                                 \
		"if itest ${filesize} > 0; then "                              \
			"mmc dev ${mmcdev}; mmc rescan; "                      \
			"setexpr blkc ${filesize} / 0x200; "                   \
			"setexpr blkc ${blkc} + 1; "                           \
			"if itest ${blkc} <= ${uboot_size}; then "             \
				"mmc write ${loadaddr} ${uboot_start} "        \
					"${blkc}; "                            \
			"fi; "                                                 \
		"fi; fi; "                                                     \
		"setenv filesize; setenv blkc \0"                              \
	"update_kernel=run kernel_name; "                                      \
		"if tftp ${kernel}; then "                                     \
			"if itest ${filesize} > 0; then "                      \
				"mmc dev ${mmcdev}; mmc rescan; "              \
				"setexpr blkc ${filesize} / 0x200; "           \
				"setexpr blkc ${blkc} + 1; "                   \
				"if itest ${blkc} <= ${kernel_size}; then "    \
					"mmc write ${loadaddr} "               \
						"${kernel_start} ${blkc}; "    \
				"fi; "                                         \
			"fi; "                                                 \
		"fi; "                                                         \
		"setenv filesize; setenv blkc \0"                              \
	"update_fdt=if tftp ${fdt_file}; then "                                \
		"if itest ${filesize} > 0; then "                              \
			"mmc dev ${mmcdev}; mmc rescan; "                      \
			"setexpr blkc ${filesize} / 0x200; "                   \
			"setexpr blkc ${blkc} + 1; "                           \
			"if itest ${blkc} <= ${fdt_size}; then "               \
				"mmc write ${loadaddr} ${fdt_start} ${blkc}; " \
			"fi; "                                                 \
		"fi; fi; "                                                     \
		"setenv filesize; setenv blkc \0"                              \

#define CONFIG_BOOTCOMMAND \
	"run mmcboot; run netboot; run panicboot"

#elif defined(CONFIG_TQMA6X_SPI_BOOT)

#define TQMA6_UBOOT_OFFSET		0x400
#define TQMA6_UBOOT_SECTOR_START	0x0
/* max u-boot size: 512k */
#define TQMA6_UBOOT_SECTOR_SIZE		TQMA6_SPI_FLASH_SECTOR_SIZE
#define TQMA6_UBOOT_SECTOR_COUNT	0x8
#define TQMA6_UBOOT_SIZE		(TQMA6_UBOOT_SECTOR_SIZE * \
					 TQMA6_UBOOT_SECTOR_COUNT)

#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET		(TQMA6_UBOOT_SIZE)
#define CONFIG_ENV_SECT_SIZE		TQMA6_SPI_FLASH_SECTOR_SIZE
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
					 CONFIG_ENV_SECT_SIZE)

#define CONFIG_ENV_SPI_BUS		(CONFIG_SF_DEFAULT_BUS)
#define CONFIG_ENV_SPI_CS		(CONFIG_SF_DEFAULT_CS)
#define CONFIG_ENV_SPI_MAX_HZ		(CONFIG_SF_DEFAULT_SPEED)
#define CONFIG_ENV_SPI_MODE		(CONFIG_SF_DEFAULT_MODE)

#define TQMA6_FDT_OFFSET		(CONFIG_ENV_OFFSET_REDUND + \
					 CONFIG_ENV_SECT_SIZE)
#define TQMA6_FDT_SECT_SIZE		(TQMA6_SPI_FLASH_SECTOR_SIZE)

#define TQMA6_FDT_SECTOR_START		0x0a /* 8 Sector u-boot, 2 Sector env */
#define TQMA6_FDT_SECTOR_COUNT		0x01

#define TQMA6_KERNEL_SECTOR_START	0x10
#define TQMA6_KERNEL_SECTOR_COUNT	0x60

#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                       \
	"mmcblkdev=0\0"                                                        \
	"uboot_offset="__stringify(TQMA6_UBOOT_OFFSET)"\0"                     \
	"uboot_sectors="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0"              \
	"fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0"                    \
	"fdt_sectors="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0"                  \
	"kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0"              \
	"kernel_sectors="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0"            \
	"update_uboot=if tftp ${uboot}; then "                                 \
		"if itest ${filesize} > 0; then "                              \
			"setexpr blkc ${filesize} + "                          \
				__stringify(TQMA6_UBOOT_OFFSET) "; "           \
			"setexpr size ${uboot_sectors} * "                     \
				__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "   \
			"if itest ${blkc} <= ${size}; then "                   \
				"sf probe; "                                   \
				"sf erase 0 ${size}; "                         \
				"sf write ${loadaddr} ${uboot_offset} "        \
					"${filesize}; "                        \
			"fi; "                                                 \
		"fi; fi; "                                                     \
		"setenv filesize 0; setenv blkc; setenv size \0"               \
	"update_kernel=run kernel_name; if tftp ${kernel}; then "              \
		"if itest ${filesize} > 0; then "                              \
			"setexpr size ${kernel_sectors} * "                    \
				__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "   \
			"setexpr offset ${kernel_start} * "                    \
				__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "   \
			"if itest ${filesize} <= ${size}; then "               \
				"sf probe; "                                   \
				"sf erase ${offset} ${size}; "                 \
				"sf write ${loadaddr} ${offset} "              \
					"${filesize}; "                        \
			"fi; "                                                 \
		"fi; fi; "                                                     \
		"setenv filesize 0; setenv size ; setenv offset\0"             \
	"update_fdt=if tftp ${fdt_file}; then "                                \
		"if itest ${filesize} > 0; then "                              \
			"setexpr size ${fdt_sectors} * "                       \
				__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "   \
			"setexpr offset ${fdt_start} * "                       \
				__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "   \
			"if itest ${filesize} <= ${size}; then "               \
				"sf probe; "                                   \
				"sf erase ${offset} ${size}; "                 \
				"sf write ${loadaddr} ${offset} "              \
					"${filesize}; "                        \
			"fi; "                                                 \
		"fi; fi; "                                                     \
		"setenv filesize 0; setenv size ; setenv offset\0"             \
	"loadimage=sf probe; "                                                 \
		"setexpr size ${kernel_sectors} * "                            \
			__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "           \
		"setexpr offset ${kernel_start} * "                            \
			__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "           \
		"sf read ${loadaddr} ${offset} ${size}; "                      \
		"setenv size ; setenv offset\0"                                \
	"loadfdt=sf probe; "                                                   \
		"setexpr size ${fdt_sectors} * "                               \
			__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "           \
		"setexpr offset ${fdt_start} * "                               \
			__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "           \
		"sf read ${${fdt_addr}} ${offset} ${size}; "                   \
		"setenv size ; setenv offset\0"                                \


#define CONFIG_BOOTCOMMAND                                                     \
	"sf probe; run mmcboot; run netboot; run panicboot"                    \

#else

#error "need to define boot source"

#endif

/* 128 MiB offset as in ARM related docu for linux suggested */
#define TQMA6_FDT_ADDRESS		0x18000000

#define CONFIG_EXTRA_ENV_SETTINGS                                              \
	"board=tqma6\0"                                                        \
	"uimage=uImage\0"                                                      \
	"zimage=zImage\0"                                                      \
	"boot_type=bootz\0"                                                    \
	"kernel_name=if test \"${boot_type}\" != bootz; then "                 \
		"setenv kernel ${uimage}; "                                    \
		"else setenv kernel ${zimage}; fi\0"                           \
	"uboot=u-boot.imx\0"                                                   \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0"                               \
	"fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0"                          \
	"console=" CONFIG_CONSOLE_DEV "\0"                                     \
	"fdt_high=0xffffffff\0"                                                \
	"initrd_high=0xffffffff\0"                                             \
	"addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0"  \
	"addfb=setenv bootargs ${bootargs} "                                   \
		"imx-fbdev.legacyfb_depth=32 consoleblank=0\0"                 \
	"mmcpart=2\0"                                                          \
	"mmcblkdev=0\0"                                                        \
	"mmcargs=run addmmc addtty addfb\0"                                    \
	"addmmc=setenv bootargs ${bootargs} "                                  \
		"root=/dev/mmcblk${mmcblkdev}p${mmcpart} rw rootwait\0"        \
	"mmcboot=echo Booting from mmc ...; "                                  \
		"setenv bootargs; "                                            \
		"run mmcargs; "                                                \
		"run loadimage; "                                              \
		"if run loadfdt; then "                                        \
			"echo boot device tree kernel ...; "                   \
			"${boot_type} ${loadaddr} - ${fdt_addr}; "             \
		"else "                                                        \
			"${boot_type}; "                                       \
		"fi;\0"                                                        \
		"setenv bootargs \0"                                           \
	"netdev=eth0\0"                                                        \
	"rootpath=/srv/nfs/tqma6\0"                                            \
	"ipmode=static\0"                                                      \
	"netargs=run addnfs addip addtty addfb\0"                              \
	"addnfs=setenv bootargs ${bootargs} "                                  \
		"root=/dev/nfs rw "                                            \
		"nfsroot=${serverip}:${rootpath},v3,tcp;\0"                    \
	"addip_static=setenv bootargs ${bootargs} "                            \
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:"            \
		"${hostname}:${netdev}:off\0"                                  \
	"addip_dynamic=setenv bootargs ${bootargs} ip=dhcp\0"                  \
	"addip=if test \"${ipmode}\" != static; then "                         \
		"run addip_dynamic; else run addip_static; fi\0"               \
	"set_getcmd=if test \"${ipmode}\" != static; then "                    \
		"setenv getcmd dhcp; setenv autoload yes; "                    \
		"else setenv getcmd tftp; setenv autoload no; fi\0"            \
	"netboot=echo Booting from net ...; "                                  \
		"run kernel_name; "                                            \
		"run set_getcmd; "                                             \
		"setenv bootargs; "                                            \
		"run netargs; "                                                \
		"if ${getcmd} ${kernel}; then "                                \
			"if ${getcmd} ${fdt_addr} ${fdt_file}; then "          \
				"${boot_type} ${loadaddr} - ${fdt_addr}; "     \
			"fi; "                                                 \
		"fi; "                                                         \
		"echo ... failed\0"                                            \
	"panicboot=echo No boot device !!! reset\0"                            \
	TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		512

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					 sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE		(128u * SZ_1K)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#endif /* __CONFIG_H */
Commit	Line	Data
cb07d74e MN	1	/*
	2	* Copyright (C) 2013, 2014 Markus Niebel <Markus.Niebel@tq-group.com>
	3	*
	4	* Configuration settings for the TQ Systems TQMa6<Q,S> module.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
1719d49c MN	12	#define CONFIG_MX6
	13
	14	/* SPL */
	15	/* #if defined(CONFIG_SPL_BUILD) */
	16
	17	#define CONFIG_SPL_MMC_SUPPORT
	18	#define CONFIG_SPL_SPI_SUPPORT
	19	#define CONFIG_SPL_FAT_SUPPORT
	20	#define CONFIG_SPL_EXT_SUPPORT
	21
	22	/* common IMX6 SPL configuration */
	23	#include "imx6_spl.h"
	24
	25	/* #endif */
	26
cb07d74e MN	27	#include "mx6_common.h"
	28	#include <asm/arch/imx-regs.h>
	29	#include <asm/imx-common/gpio.h>
	30	#include <linux/sizes.h>
	31
cb07d74e MN	32	#if defined(CONFIG_MX6DL) \|\| defined(CONFIG_MX6S)
	33	#define PHYS_SDRAM_SIZE (512u * SZ_1M)
	34	#elif defined(CONFIG_MX6Q) \|\| defined(CONFIG_MX6D)
	35	#define PHYS_SDRAM_SIZE (1024u * SZ_1M)
	36	#endif
	37
	38	#if defined(CONFIG_MBA6)
	39
	40	#if defined(CONFIG_MX6DL) \|\| defined(CONFIG_MX6S)
	41	#define CONFIG_DEFAULT_FDT_FILE "imx6dl-mba6x.dtb"
	42	#elif defined(CONFIG_MX6Q) \|\| defined(CONFIG_MX6Q)
	43	#define CONFIG_DEFAULT_FDT_FILE "imx6q-mba6x.dtb"
	44	#endif
	45
	46	#endif
	47
	48	#define CONFIG_DISPLAY_CPUINFO
	49	#define CONFIG_DISPLAY_BOARDINFO
	50	#define CONFIG_SYS_GENERIC_BOARD
	51
	52	#define CONFIG_CMDLINE_TAG
	53	#define CONFIG_SETUP_MEMORY_TAGS
	54	#define CONFIG_INITRD_TAG
	55	#define CONFIG_REVISION_TAG
	56
	57	#define CONFIG_BOARD_EARLY_INIT_F
	58	#define CONFIG_BOARD_LATE_INIT
	59
	60	#define CONFIG_MXC_GPIO
	61	#define CONFIG_MXC_UART
	62
	63	/* SPI */
	64	#define CONFIG_CMD_SPI
	65	#define CONFIG_MXC_SPI
	66
	67	/* SPI Flash */
	68	#define CONFIG_SPI_FLASH
	69	#define CONFIG_SPI_FLASH_STMICRO
	70
52835468 MN	71	#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
52835468 MN	72
cb07d74e MN	73	#define CONFIG_CMD_SF
cb07d74e MN	74	#define CONFIG_SF_DEFAULT_BUS 0
1719d49c	75	#define CONFIG_SF_DEFAULT_CS 0
cb07d74e MN	76	#define CONFIG_SF_DEFAULT_SPEED 50000000
	77	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	78
	79	/* I2C Configs */
	80	#define CONFIG_CMD_I2C
	81	#define CONFIG_SYS_I2C
	82	#define CONFIG_SYS_I2C_MXC
	83	#define CONFIG_I2C_MULTI_BUS
	84	#define CONFIG_SYS_I2C_SPEED 100000
	85
	86	/* I2C SYSMON (LM75) */
	87	#define CONFIG_DTT_LM75
	88	#if defined(CONFIG_MBA6)
	89	#define CONFIG_DTT_SENSORS { 0, 1 }
	90	#else
	91	#define CONFIG_DTT_SENSORS { 0 }
	92	#endif
	93	#define CONFIG_DTT_MAX_TEMP 70
	94	#define CONFIG_DTT_MIN_TEMP -30
	95	#define CONFIG_DTT_HYSTERESIS 3
	96	#define CONFIG_CMD_DTT
	97
	98	/* I2C EEPROM (M24C64) */
	99	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	100	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	101	#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */
	102	#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20
	103	#define CONFIG_CMD_EEPROM
	104
	105	#define CONFIG_POWER
	106	#define CONFIG_POWER_I2C
	107	#define CONFIG_POWER_PFUZE100
	108	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	109	#define TQMA6_PFUZE100_I2C_BUS 2
	110
	111	/* MMC Configs */
	112	#define CONFIG_FSL_ESDHC
	113	#define CONFIG_FSL_USDHC
	114	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	115
	116	#define CONFIG_MMC
	117	#define CONFIG_CMD_MMC
	118	#define CONFIG_GENERIC_MMC
	119	#define CONFIG_BOUNCE_BUFFER
	120
	121	/* USB Configs */
	122	#define CONFIG_CMD_USB
	123	#define CONFIG_USB_EHCI
	124	#define CONFIG_USB_EHCI_MX6
	125	#define CONFIG_USB_STORAGE
	126	#define CONFIG_USB_HOST_ETHER
	127	#define CONFIG_USB_ETHER_SMSC95XX
	128	#define CONFIG_MXC_USB_PORT 1
	129	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	130	#define CONFIG_MXC_USB_FLAGS 0
	131
	132	/* Fuses */
	133	#define CONFIG_MXC_OCOTP
	134	#define CONFIG_CMD_FUSE
	135
	136	#define CONFIG_CMD_EXT2
	137	#define CONFIG_CMD_FAT
	138	#define CONFIG_DOS_PARTITION
	139
140	#define CONFIG_CMD_PING
141	#define CONFIG_CMD_DHCP
142	#define CONFIG_CMD_MII
143	#define CONFIG_CMD_NET
144
145	#define CONFIG_FEC_MXC
146	#define IMX_FEC_BASE ENET_BASE_ADDR
147	#define CONFIG_PHYLIB
148	#define CONFIG_MII
149
150	#if defined(CONFIG_MBA6)
151
152	#define CONFIG_FEC_XCV_TYPE RGMII
153	#define CONFIG_ETHPRIME "FEC"
154
155	#define CONFIG_FEC_MXC_PHYADDR 0x03
156	#define CONFIG_PHY_MICREL
157	#define CONFIG_PHY_KSZ9031
158
159	#else
160
161	#error "define PHY to use for your baseboard"
162
163	#endif
164
165	#define CONFIG_ARP_TIMEOUT 200UL
166	/* Network config - Allow larger/faster download for TFTP/NFS */
167	#define CONFIG_IP_DEFRAG
168	#define CONFIG_TFTP_BLOCKSIZE 4096
169	#define CONFIG_NFS_READ_SIZE 4096
170
171	#if defined(CONFIG_MBA6)
172
173	#define CONFIG_MXC_UART_BASE UART2_BASE
174	#define CONFIG_CONSOLE_DEV "ttymxc1"
175
176	#else
177
178	#error "define baseboard specific things (uart, number of SD-card slots)"
179
180	#endif
181
182	/* allow to overwrite serial and ethaddr */
183	#define CONFIG_ENV_OVERWRITE
184	#define CONFIG_CONS_INDEX 1
185	#define CONFIG_BAUDRATE 115200
186
187	/* Command definition */
188	#include <config_cmd_default.h>
189
190	#define CONFIG_CMD_BMODE
191	#define CONFIG_CMD_BOOTZ
192	#define CONFIG_CMD_ITEST
193	#define CONFIG_CMD_SETEXPR
194	#undef CONFIG_CMD_IMLS
195
196	#define CONFIG_BOOTDELAY 3
197
198	#define CONFIG_LOADADDR 0x12000000
199
200	/* place code in last 4 MiB of RAM */
201	#if defined(CONFIG_MX6DL) \|\| defined(CONFIG_MX6S)
202	#define CONFIG_SYS_TEXT_BASE 0x2fc00000
203	#elif defined(CONFIG_MX6Q) \|\| defined(CONFIG_MX6D)
204	#define CONFIG_SYS_TEXT_BASE 0x4fc00000
205	#endif
206
207	#define CONFIG_ENV_SIZE (SZ_8K)
208	/* Size of malloc() pool */
209	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * SZ_1M)
210
211	#if defined(CONFIG_TQMA6X_MMC_BOOT)
212
213	#define CONFIG_ENV_IS_IN_MMC
214	#define TQMA6_UBOOT_OFFSET SZ_1K
215	#define TQMA6_UBOOT_SECTOR_START 0x2
216	#define TQMA6_UBOOT_SECTOR_COUNT 0x7fe
217
218	#define CONFIG_ENV_OFFSET SZ_1M
219	#define CONFIG_SYS_MMC_ENV_DEV 0
220
221	#define TQMA6_FDT_OFFSET (2 * SZ_1M)
222	#define TQMA6_FDT_SECTOR_START 0x1000
223	#define TQMA6_FDT_SECTOR_COUNT 0x800
224
225	#define TQMA6_KERNEL_SECTOR_START 0x2000
226	#define TQMA6_KERNEL_SECTOR_COUNT 0x2000
227
228	#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
229	"uboot_start="__stringify(TQMA6_UBOOT_SECTOR_START)"\0" \
230	"uboot_size="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
231	"fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
232	"fdt_size="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
233	"kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
234	"kernel_size="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
235	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
236	"loadimage=mmc dev ${mmcdev}; " \
237	"mmc read ${loadaddr} ${kernel_start} ${kernel_size};\0" \
238	"loadfdt=mmc dev ${mmcdev}; " \
239	"mmc read ${fdt_addr} ${fdt_start} ${fdt_size};\0" \
240	"update_uboot=if tftp ${uboot}; then " \
241	"if itest ${filesize} > 0; then " \
242	"mmc dev ${mmcdev}; mmc rescan; " \
243	"setexpr blkc ${filesize} / 0x200; " \
244	"setexpr blkc ${blkc} + 1; " \
245	"if itest ${blkc} <= ${uboot_size}; then " \
246	"mmc write ${loadaddr} ${uboot_start} " \
247	"${blkc}; " \
248	"fi; " \
249	"fi; fi; " \
250	"setenv filesize; setenv blkc \0" \
251	"update_kernel=run kernel_name; " \
252	"if tftp ${kernel}; then " \
253	"if itest ${filesize} > 0; then " \
254	"mmc dev ${mmcdev}; mmc rescan; " \
255	"setexpr blkc ${filesize} / 0x200; " \
256	"setexpr blkc ${blkc} + 1; " \
257	"if itest ${blkc} <= ${kernel_size}; then " \
258	"mmc write ${loadaddr} " \
259	"${kernel_start} ${blkc}; " \
260	"fi; " \
261	"fi; " \
262	"fi; " \
263	"setenv filesize; setenv blkc \0" \
264	"update_fdt=if tftp ${fdt_file}; then " \
265	"if itest ${filesize} > 0; then " \
266	"mmc dev ${mmcdev}; mmc rescan; " \
267	"setexpr blkc ${filesize} / 0x200; " \
268	"setexpr blkc ${blkc} + 1; " \
269	"if itest ${blkc} <= ${fdt_size}; then " \
270	"mmc write ${loadaddr} ${fdt_start} ${blkc}; " \
271	"fi; " \
272	"fi; fi; " \
273	"setenv filesize; setenv blkc \0" \
274
275	#define CONFIG_BOOTCOMMAND \
276	"run mmcboot; run netboot; run panicboot"
277
278	#elif defined(CONFIG_TQMA6X_SPI_BOOT)
279
cb07d74e MN	280	#define TQMA6_UBOOT_OFFSET 0x400
	281	#define TQMA6_UBOOT_SECTOR_START 0x0
	282	/* max u-boot size: 512k */
52835468	283	#define TQMA6_UBOOT_SECTOR_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
cb07d74e MN	284	#define TQMA6_UBOOT_SECTOR_COUNT 0x8
	285	#define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \
	286	TQMA6_UBOOT_SECTOR_COUNT)
	287
	288	#define CONFIG_ENV_IS_IN_SPI_FLASH
	289	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	290	#define CONFIG_ENV_OFFSET (TQMA6_UBOOT_SIZE)
52835468	291	#define CONFIG_ENV_SECT_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
cb07d74e MN	292	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
	293	CONFIG_ENV_SECT_SIZE)
	294
	295	#define CONFIG_ENV_SPI_BUS (CONFIG_SF_DEFAULT_BUS)
	296	#define CONFIG_ENV_SPI_CS (CONFIG_SF_DEFAULT_CS)
	297	#define CONFIG_ENV_SPI_MAX_HZ (CONFIG_SF_DEFAULT_SPEED)
	298	#define CONFIG_ENV_SPI_MODE (CONFIG_SF_DEFAULT_MODE)
	299
	300	#define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \
	301	CONFIG_ENV_SECT_SIZE)
52835468	302	#define TQMA6_FDT_SECT_SIZE (TQMA6_SPI_FLASH_SECTOR_SIZE)
cb07d74e MN	303
	304	#define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */
	305	#define TQMA6_FDT_SECTOR_COUNT 0x01
	306
	307	#define TQMA6_KERNEL_SECTOR_START 0x10
	308	#define TQMA6_KERNEL_SECTOR_COUNT 0x60
	309
	310	#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
	311	"mmcblkdev=0\0" \
	312	"uboot_offset="__stringify(TQMA6_UBOOT_OFFSET)"\0" \
	313	"uboot_sectors="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
	314	"fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
	315	"fdt_sectors="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
	316	"kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
	317	"kernel_sectors="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
	318	"update_uboot=if tftp ${uboot}; then " \
	319	"if itest ${filesize} > 0; then " \
	320	"setexpr blkc ${filesize} + " \
	321	__stringify(TQMA6_UBOOT_OFFSET) "; " \
	322	"setexpr size ${uboot_sectors} * " \
52835468	323	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e MN	324	"if itest ${blkc} <= ${size}; then " \
	325	"sf probe; " \
	326	"sf erase 0 ${size}; " \
	327	"sf write ${loadaddr} ${uboot_offset} " \
	328	"${filesize}; " \
	329	"fi; " \
	330	"fi; fi; " \
	331	"setenv filesize 0; setenv blkc; setenv size \0" \
	332	"update_kernel=run kernel_name; if tftp ${kernel}; then " \
	333	"if itest ${filesize} > 0; then " \
	334	"setexpr size ${kernel_sectors} * " \
52835468	335	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e	336	"setexpr offset ${kernel_start} * " \
52835468	337	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e MN	338	"if itest ${filesize} <= ${size}; then " \
	339	"sf probe; " \
	340	"sf erase ${offset} ${size}; " \
	341	"sf write ${loadaddr} ${offset} " \
	342	"${filesize}; " \
	343	"fi; " \
	344	"fi; fi; " \
	345	"setenv filesize 0; setenv size ; setenv offset\0" \
	346	"update_fdt=if tftp ${fdt_file}; then " \
	347	"if itest ${filesize} > 0; then " \
	348	"setexpr size ${fdt_sectors} * " \
52835468	349	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e	350	"setexpr offset ${fdt_start} * " \
52835468	351	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e MN	352	"if itest ${filesize} <= ${size}; then " \
	353	"sf probe; " \
	354	"sf erase ${offset} ${size}; " \
	355	"sf write ${loadaddr} ${offset} " \
	356	"${filesize}; " \
	357	"fi; " \
	358	"fi; fi; " \
	359	"setenv filesize 0; setenv size ; setenv offset\0" \
	360	"loadimage=sf probe; " \
	361	"setexpr size ${kernel_sectors} * " \
52835468	362	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e	363	"setexpr offset ${kernel_start} * " \
52835468	364	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e MN	365	"sf read ${loadaddr} ${offset} ${size}; " \
	366	"setenv size ; setenv offset\0" \
	367	"loadfdt=sf probe; " \
	368	"setexpr size ${fdt_sectors} * " \
52835468	369	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e	370	"setexpr offset ${fdt_start} * " \
52835468	371	__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
cb07d74e MN	372	"sf read ${${fdt_addr}} ${offset} ${size}; " \
	373	"setenv size ; setenv offset\0" \
	374
	375
	376	#define CONFIG_BOOTCOMMAND \
	377	"sf probe; run mmcboot; run netboot; run panicboot" \
	378
	379	#else
	380
	381	#error "need to define boot source"
	382
	383	#endif
	384
	385	/* 128 MiB offset as in ARM related docu for linux suggested */
	386	#define TQMA6_FDT_ADDRESS 0x18000000
	387
	388	#define CONFIG_EXTRA_ENV_SETTINGS \
	389	"board=tqma6\0" \
	390	"uimage=uImage\0" \
	391	"zimage=zImage\0" \
	392	"boot_type=bootz\0" \
	393	"kernel_name=if test \"${boot_type}\" != bootz; then " \
	394	"setenv kernel ${uimage}; " \
	395	"else setenv kernel ${zimage}; fi\0" \
	396	"uboot=u-boot.imx\0" \
	397	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	398	"fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0" \
	399	"console=" CONFIG_CONSOLE_DEV "\0" \
	400	"fdt_high=0xffffffff\0" \
	401	"initrd_high=0xffffffff\0" \
	402	"addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
	403	"addfb=setenv bootargs ${bootargs} " \
	404	"imx-fbdev.legacyfb_depth=32 consoleblank=0\0" \
	405	"mmcpart=2\0" \
	406	"mmcblkdev=0\0" \
	407	"mmcargs=run addmmc addtty addfb\0" \
	408	"addmmc=setenv bootargs ${bootargs} " \
	409	"root=/dev/mmcblk${mmcblkdev}p${mmcpart} rw rootwait\0" \
	410	"mmcboot=echo Booting from mmc ...; " \
	411	"setenv bootargs; " \
	412	"run mmcargs; " \
	413	"run loadimage; " \
	414	"if run loadfdt; then " \
	415	"echo boot device tree kernel ...; " \
	416	"${boot_type} ${loadaddr} - ${fdt_addr}; " \
	417	"else " \
	418	"${boot_type}; " \
	419	"fi;\0" \
	420	"setenv bootargs \0" \
	421	"netdev=eth0\0" \
	422	"rootpath=/srv/nfs/tqma6\0" \
	423	"ipmode=static\0" \
	424	"netargs=run addnfs addip addtty addfb\0" \
	425	"addnfs=setenv bootargs ${bootargs} " \
	426	"root=/dev/nfs rw " \
	427	"nfsroot=${serverip}:${rootpath},v3,tcp;\0" \
	428	"addip_static=setenv bootargs ${bootargs} " \
	429	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	430	"${hostname}:${netdev}:off\0" \
	431	"addip_dynamic=setenv bootargs ${bootargs} ip=dhcp\0" \
	432	"addip=if test \"${ipmode}\" != static; then " \
	433	"run addip_dynamic; else run addip_static; fi\0" \
	434	"set_getcmd=if test \"${ipmode}\" != static; then " \
	435	"setenv getcmd dhcp; setenv autoload yes; " \
436	"else setenv getcmd tftp; setenv autoload no; fi\0" \
437	"netboot=echo Booting from net ...; " \
438	"run kernel_name; " \
439	"run set_getcmd; " \
440	"setenv bootargs; " \
441	"run netargs; " \
442	"if ${getcmd} ${kernel}; then " \
443	"if ${getcmd} ${fdt_addr} ${fdt_file}; then " \
444	"${boot_type} ${loadaddr} - ${fdt_addr}; " \
445	"fi; " \
446	"fi; " \
447	"echo ... failed\0" \
448	"panicboot=echo No boot device !!! reset\0" \
449	TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
450
451	/* Miscellaneous configurable options */
452	#define CONFIG_SYS_LONGHELP
453	#define CONFIG_SYS_HUSH_PARSER
454	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
455
456	#define CONFIG_AUTO_COMPLETE
457	#define CONFIG_SYS_CBSIZE 512
458
459	/* Print Buffer Size */
460	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
461	sizeof(CONFIG_SYS_PROMPT) + 16)
462	#define CONFIG_SYS_MAXARGS 16
463	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
464
465	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
cb07d74e MN	466
	467	#define CONFIG_CMDLINE_EDITING
	468	#define CONFIG_STACKSIZE (128u * SZ_1K)
	469
	470	/* Physical Memory Map */
	471	#define CONFIG_NR_DRAM_BANKS 1
	472	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	473
	474	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	475	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	476	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	477
	478	#define CONFIG_SYS_INIT_SP_OFFSET \
	479	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	480	#define CONFIG_SYS_INIT_SP_ADDR \
	481	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	482
	483	/* FLASH and environment organization */
	484	#define CONFIG_SYS_NO_FLASH
	485
	486	#define CONFIG_OF_LIBFDT
	487	#define CONFIG_OF_BOARD_SETUP
	488	#define CONFIG_FIT
	489	#define CONFIG_FIT_VERBOSE
	490
	491	#ifndef CONFIG_SYS_DCACHE_OFF
	492	#define CONFIG_CMD_CACHE
	493	#endif
	494
	495	#endif /* __CONFIG_H */