]>
Commit | Line | Data |
---|---|---|
c609719b WD |
1 | /* |
2 | * (C) Copyright 2002 | |
3 | * Gary Jennejohn <gj@denx.de> | |
4 | * | |
5 | * Configuation settings for the TRAB board. | |
6 | * | |
7 | * See file CREDITS for list of people who contributed to this | |
8 | * project. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License as | |
12 | * published by the Free Software Foundation; either version 2 of | |
13 | * the License, or (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
23 | * MA 02111-1307 USA | |
24 | */ | |
25 | ||
26 | #ifndef __CONFIG_H | |
27 | #define __CONFIG_H | |
28 | ||
29 | /* | |
30 | * If we are developing, we might want to start armboot from ram | |
31 | * so we MUST NOT initialize critical regs like mem-timing ... | |
32 | */ | |
33 | #define CONFIG_INIT_CRITICAL /* undef for developing */ | |
34 | ||
35 | /* | |
36 | * High Level Configuration Options | |
37 | * (easy to change) | |
38 | */ | |
39 | #define CONFIG_ARM920T 1 /* This is an arm920t CPU */ | |
40 | #define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ | |
41 | #define CONFIG_TRAB 1 /* on a TRAB Board */ | |
42 | #undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ | |
43 | ||
44 | /* input clock of PLL */ | |
7f6c2cbc | 45 | #define CONFIG_SYS_CLK_FREQ 12000000 /* TRAB has 12 MHz input clock */ |
c609719b WD |
46 | |
47 | #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ | |
48 | ||
49 | #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ | |
50 | #define CONFIG_SETUP_MEMORY_TAGS 1 | |
51 | #define CONFIG_INITRD_TAG 1 | |
52 | ||
53 | /* | |
54 | * Size of malloc() pool | |
55 | */ | |
699b13a6 | 56 | #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) |
c609719b WD |
57 | |
58 | /* | |
59 | * Hardware drivers | |
60 | */ | |
61 | #define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ | |
62 | #define CS8900_BASE 0x07000300 /* agrees with WIN CE PA */ | |
63 | #define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ | |
64 | ||
65 | #define CONFIG_VFD 1 /* VFD linear frame buffer driver */ | |
66 | #define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */ | |
67 | ||
68 | /* | |
69 | * select serial console configuration | |
70 | */ | |
71 | #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */ | |
72 | ||
73 | #define CONFIG_HWFLOW /* include RTS/CTS flow control support */ | |
74 | ||
75 | #define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */ | |
76 | ||
77 | #define CONFIG_MODEM_KEY_MAGIC "23" /* hold down these keys to enable modem */ | |
78 | ||
79 | /* | |
80 | * The following enables modem debugging stuff. The dbg() and | |
81 | * 'char screen[1024]' are used for debug printfs. Unfortunately, | |
82 | * it is usable only from BDI | |
83 | */ | |
84 | #undef CONFIG_MODEM_SUPPORT_DEBUG | |
85 | ||
86 | /* allow to overwrite serial and ethaddr */ | |
87 | #define CONFIG_ENV_OVERWRITE | |
88 | ||
89 | #define CONFIG_BAUDRATE 115200 | |
90 | ||
91 | #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ | |
92 | ||
93 | #ifdef CONFIG_HWFLOW | |
94 | #define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW | |
95 | #else | |
96 | #define CONFIG_COMMANDS_ADD_HWFLOW 0 | |
97 | #endif | |
98 | ||
99 | #ifdef CONFIG_VFD | |
100 | #define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD | |
101 | #else | |
102 | #define CONFIG_COMMANDS_ADD_VFD 0 | |
103 | #endif | |
104 | ||
105 | #ifndef USE_920T_MMU | |
106 | #define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ | |
107 | CFG_CMD_BSP | \ | |
108 | CONFIG_COMMANDS_ADD_HWFLOW | \ | |
109 | CONFIG_COMMANDS_ADD_VFD ) | |
110 | #else | |
111 | #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ | |
112 | CFG_CMD_BSP | \ | |
113 | CONFIG_COMMANDS_ADD_HWFLOW | \ | |
114 | CONFIG_COMMANDS_ADD_VFD ) | |
115 | #endif | |
116 | ||
117 | /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ | |
118 | #include <cmd_confdefs.h> | |
119 | ||
120 | ||
121 | #define CONFIG_BOOTDELAY 5 | |
122 | #define CONFIG_PREBOOT "echo;echo *** booting ***;echo" | |
123 | #define CONFIG_BOOTARGS "console=ttyS0" | |
124 | #define CONFIG_ETHADDR 00:D0:93:00:61:11 | |
125 | #define CONFIG_NETMASK 255.255.255.0 | |
126 | #define CONFIG_IPADDR 192.168.3.27 | |
127 | #define CONFIG_SERVERIP 192.168.3.1 | |
128 | #define CONFIG_BOOTCOMMAND "run flash_nfs" | |
129 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
130 | "nfs_args=setenv bootargs root=/dev/nfs rw " \ | |
131 | "nfsroot=$(serverip):$(rootpath)\0" \ | |
132 | "rootpath=/opt/eldk/arm_920TDI\0" \ | |
133 | "ram_args=setenv bootargs root=/dev/ram rw\0" \ | |
134 | "add_net=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \ | |
135 | "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \ | |
136 | "add_misc=setenv bootargs $(bootargs) console=ttyS0 panic=1\0" \ | |
137 | "load=tftp 0xC100000 /tftpboot/TRAB/u-boot.bin\0" \ | |
e95b61cf | 138 | "update=protect off 1:0-8;era 1:0-8;cp.b 0xc100000 0 $(filesize);" \ |
c609719b WD |
139 | "setenv filesize;saveenv\0" \ |
140 | "loadfile=/tftpboot/TRAB/pImage\0" \ | |
141 | "loadaddr=c400000\0" \ | |
142 | "net_load=tftpboot $(loadaddr) $(loadfile)\0" \ | |
143 | "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \ | |
144 | "kernel_addr=00040000\0" \ | |
145 | "flash_nfs=run nfs_args add_net add_misc;bootm $(kernel_addr)\0" \ | |
146 | "mdm_init1=ATZ\0" \ | |
147 | "mdm_init2=ATS0=1\0" \ | |
148 | "mdm_flow_control=rts/cts\0" | |
149 | ||
150 | #if 0 /* disabled for development */ | |
151 | #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ | |
152 | #define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" | |
153 | #define CONFIG_AUTOBOOT_DELAY_STR "system" /* 1st password */ | |
154 | #endif | |
155 | ||
156 | #if (CONFIG_COMMANDS & CFG_CMD_KGDB) | |
157 | #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ | |
158 | /* what's this ? it's not used anywhere */ | |
159 | #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ | |
160 | #endif | |
161 | ||
162 | /* | |
163 | * Miscellaneous configurable options | |
164 | */ | |
165 | #define CFG_LONGHELP /* undef to save memory */ | |
166 | #define CFG_PROMPT "TRAB # " /* Monitor Command Prompt */ | |
167 | #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ | |
168 | #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ | |
169 | #define CFG_MAXARGS 16 /* max number of command args */ | |
170 | #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ | |
171 | ||
172 | #define CFG_MEMTEST_START 0x0c000000 /* memtest works on */ | |
173 | #define CFG_MEMTEST_END 0x0d000000 /* 16 MB in DRAM */ | |
174 | ||
175 | #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ | |
176 | ||
177 | #define CFG_LOAD_ADDR 0x0cf00000 /* default load address */ | |
178 | ||
179 | #ifdef CONFIG_TRAB_50MHZ | |
180 | /* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ | |
181 | /* it to wrap 100 times (total 1562500) to get 1 sec. */ | |
182 | /* this should _really_ be calculated !! */ | |
183 | #define CFG_HZ 1562500 | |
184 | #else | |
185 | /* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */ | |
186 | /* it to wrap 100 times (total 1039000) to get 1 sec. */ | |
187 | /* this should _really_ be calculated !! */ | |
188 | #define CFG_HZ 1039000 | |
189 | #endif | |
190 | ||
191 | /* valid baudrates */ | |
192 | #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } | |
193 | ||
194 | #define CONFIG_MISC_INIT_R /* have misc_init_r() function */ | |
195 | ||
196 | /*----------------------------------------------------------------------- | |
197 | * Stack sizes | |
198 | * | |
199 | * The stack sizes are set up in start.S using the settings below | |
200 | */ | |
201 | #define CONFIG_STACKSIZE (128*1024) /* regular stack */ | |
202 | #ifdef CONFIG_USE_IRQ | |
203 | #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ | |
204 | #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ | |
205 | #endif | |
206 | ||
207 | /*----------------------------------------------------------------------- | |
208 | * Physical Memory Map | |
209 | */ | |
210 | #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ | |
211 | #define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */ | |
212 | #define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ | |
213 | ||
214 | #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ | |
215 | #define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ | |
216 | ||
217 | /* The following #defines are needed to get flash environment right */ | |
218 | #define CFG_MONITOR_BASE PHYS_FLASH_1 | |
219 | #define CFG_MONITOR_LEN (256 << 10) | |
220 | ||
221 | #define CFG_FLASH_BASE PHYS_FLASH_1 | |
222 | ||
223 | /*----------------------------------------------------------------------- | |
224 | * FLASH and environment organization | |
225 | */ | |
226 | #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
227 | #define CFG_MAX_FLASH_SECT (71) /* max number of sectors on one chip */ | |
228 | ||
229 | /* timeout values are in ticks */ | |
230 | #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ | |
231 | #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ | |
232 | ||
233 | #define CFG_ENV_IS_IN_FLASH 1 | |
234 | ||
235 | /* Address and size of Primary Environment Sector */ | |
236 | #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) | |
237 | #define CFG_ENV_SIZE 0x4000 | |
238 | ||
239 | /* Address and size of Redundant Environment Sector */ | |
240 | #define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) | |
241 | #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) | |
242 | ||
243 | #endif /* __CONFIG_H */ |