[people/ms/u-boot.git] / include / configs / tseries.h

/*
 * tseries.h
 *
 * specific parts for B&R T-Series Motherboard
 *
 * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
 * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
 *
 * SPDX-License-Identifier:        GPL-2.0+
 */

#ifndef __CONFIG_TSERIES_H__
#define __CONFIG_TSERIES_H__

#include <configs/bur_am335x_common.h>
/* ------------------------------------------------------------------------- */
#define CONFIG_AM335X_LCD
#define CONFIG_LCD
#define CONFIG_LCD_ROTATION
#define CONFIG_LCD_DT_SIMPLEFB
#define CONFIG_SYS_WHITE_ON_BLACK
#define LCD_BPP				LCD_COLOR32

#define CONFIG_HW_WATCHDOG
#define CONFIG_OMAP_WATCHDOG
#define CONFIG_SPL_WATCHDOG_SUPPORT

#define CONFIG_SPL_GPIO_SUPPORT
/* Bootcount using the RTC block */
#define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_AM33XX
/* Clock Defines */
#define V_OSCK				26000000  /* Clock output from T2 */
#define V_SCLK				(V_OSCK)

#define CONFIG_POWER_TPS65217

/* Support both device trees and ATAGs. */
#define CONFIG_OF_LIBFDT
#define CONFIG_USE_FDT			/* use fdt within board code */
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_CMD_BOOTZ
/*#define CONFIG_MACH_TYPE		3589*/
#define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/

/* MMC/SD IP block */
#if defined(CONFIG_EMMC_BOOT)
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_OMAP_HSMMC
 #define CONFIG_CMD_MMC
 #define CONFIG_SUPPORT_EMMC_BOOT
/* RAW SD card / eMMC locations. */
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x200 /* 256 KB */
 #define CONFIG_SPL_MMC_SUPPORT
#endif /* CONFIG_EMMC_BOOT */

/*
 * When we have SPI or NAND flash we expect to be making use of mtdparts,
 * both for ease of use in U-Boot and for passing information on to
 * the Linux kernel.
 */
#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
#define CONFIG_MTD_DEVICE		/* Required for mtdparts */
#define CONFIG_CMD_MTDPARTS
#endif /* CONFIG_SPI_BOOT, ... */

#undef CONFIG_SPL_OS_BOOT
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000

/* RAW SD card / eMMC */
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */

/* NAND */
#ifdef CONFIG_NAND
#define CONFIG_CMD_SPL_NAND_OFS			0x080000 /* end of u-boot */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS		0x140000
#define CONFIG_CMD_SPL_WRITE_SIZE		0x2000
#endif /* CONFIG_NAND */
#endif /* CONFIG_SPL_OS_BOOT */

#ifdef CONFIG_NAND
#define CONFIG_SPL_NAND_AM33XX_BCH	/* OMAP4 and later ELM support */
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
#endif /* CONFIG_NAND */

/* Always 64 KiB env size */
#define CONFIG_ENV_SIZE			(64 << 10)

#ifdef CONFIG_NAND
#define NANDARGS \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"nandargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"${optargs_rot} " \
		"root=mtd6 " \
		"rootfstype=jffs2\0" \
	"kernelsize=0x400000\0" \
	"nandboot=echo booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} kernel ${kernelsize}; " \
		"bootz ${loadaddr} - ${dtbaddr}\0" \
	"defboot=run nandboot\0" \
	"bootlimit=1\0" \
	"simplefb=1\0 " \
	"altbootcmd=run usbscript\0"
#else
#define NANDARGS ""
#endif /* CONFIG_NAND */

#ifdef CONFIG_MMC
#define MMCARGS \
"dtbdev=mmc\0" \
"dtbpart=0:1\0" \
"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
	"root=/dev/mmcblk0p2 rootfstype=ext4\0" \
"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
	"setenv simplefb 1; " \
	"ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
	"ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
	"run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
	"setenv simplefb 0; " \
	"ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
	"run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
	"ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
	"run ramboot; run usbupdate;\0" \
"bootlimit=1\0" \
"altbootcmd=run mmcboot0;\0" \
"upduboot=dhcp; " \
	"tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
	"tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
#else
#define MMCARGS ""
#endif /* CONFIG_MMC */

#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
"verify=no\0" \
"autoload=0\0" \
"dtb=bur-ppt-ts30.dtb\0" \
"dtbaddr=0x80100000\0" \
"loadaddr=0x80200000\0" \
"ramaddr=0x80A00000\0" \
"kernel=zImage\0" \
"ramdisk=rootfs.cpio.uboot\0" \
"console=ttyO0,115200n8\0" \
"optargs=consoleblank=0 quiet lpj=1191936 panic=2\0" \
"nfsroot=/tftpboot/tseries/rootfs-small\0" \
"nfsopts=nolock\0" \
"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
"netargs=setenv bootargs console=${console} " \
	"${optargs} " \
	"root=/dev/nfs " \
	"nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
	"ip=dhcp\0" \
"netboot=echo Booting from network ...; " \
	"dhcp; " \
	"tftp ${loadaddr} ${kernel}; " \
	"tftp ${dtbaddr} ${dtb}; " \
	"run netargs; " \
	"bootz ${loadaddr} - ${dtbaddr}\0" \
"ramboot=echo Booting from network into RAM ...; "\
	"if dhcp; then; " \
	"tftp ${loadaddr} ${kernel}; " \
	"tftp ${ramaddr} ${ramdisk}; " \
	"if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
	"then; else tftp ${dtbaddr} ${dtb}; fi;" \
	"run mmcroot0; " \
	"bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
"usbupdate=echo Updating UBOOT from USB-Stick ...; " \
	"usb start && fatload usb 0 0x80000000 updateubootusb.img && source\0" \
"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
	"setenv autoload 0; " \
	"dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
NANDARGS \
MMCARGS
#endif /* !CONFIG_SPL_BUILD*/

#define CONFIG_BOOTCOMMAND \
	"run defboot;"
#define CONFIG_BOOTDELAY		0

#ifdef CONFIG_NAND
/*
 * GPMC  block.  We support 1 device and the physical address to
 * access CS0 at is 0x8000000.
 */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x8000000
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_CMD_NAND
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
					CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, \
					10, 11, 12, 13, 14, 15, 16, 17, \
					18, 19, 20, 21, 22, 23, 24, 25, \
					26, 27, 28, 29, 30, 31, 32, 33, \
					34, 35, 36, 37, 38, 39, 40, 41, \
					42, 43, 44, 45, 46, 47, 48, 49, \
					50, 51, 52, 53, 54, 55, 56, 57, }

#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	14

#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000

#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:" \
					"128k(MLO)," \
					"128k(MLO.backup)," \
					"128k(dtb)," \
					"128k(u-boot-env)," \
					"512k(u-boot)," \
					"4m(kernel),"\
					"128m(rootfs),"\
					"-(user)"
#define CONFIG_NAND_OMAP_GPMC_WSCFG	1
#endif /* CONFIG_NAND */

/* USB configuration */
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_MUSB_PIO_ONLY
#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST

#ifdef CONFIG_MUSB_HOST
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif /* CONFIG_MUSB_HOST */

#if defined(CONFIG_SPI_BOOT)
/* McSPI IP block */
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SF_DEFAULT_SPEED		24000000

#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
#define CONFIG_ENV_OFFSET		(768 << 10) /* 768 KiB in */
#define CONFIG_ENV_OFFSET_REDUND	(896 << 10) /* 896 KiB in */

#elif defined(CONFIG_EMMC_BOOT)
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		2
#define CONFIG_ENV_OFFSET		0x40000	/* TODO: Adresse definieren */
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT

#elif defined(CONFIG_NAND)
/* No NAND env support in SPL */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_ENV_IS_NOWHERE
#else
#define CONFIG_ENV_IS_IN_NAND
#endif
#define CONFIG_ENV_OFFSET		0x60000
#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_ENV_SIZE
#else
#error "no storage for Environment defined!"
#endif
/*
 * Common filesystems support.  When we have removable storage we
 * enabled a number of useful commands and support.
 */
#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FS_GENERIC
#endif /* CONFIG_MMC, ... */

#endif	/* ! __CONFIG_TSERIES_H__ */
Commit	Line	Data
893c04e1 HP	1	/*
	2	* tseries.h
	3	*
	4	* specific parts for B&R T-Series Motherboard
	5	*
	6	* Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
	7	* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_TSERIES_H__
	13	#define __CONFIG_TSERIES_H__
	14
	15	#include <configs/bur_am335x_common.h>
	16	/* ------------------------------------------------------------------------- */
fbd5aeda HP	17	#define CONFIG_AM335X_LCD
fbd5aeda HP	18	#define CONFIG_LCD
d804452b	19	#define CONFIG_LCD_ROTATION
99f72472	20	#define CONFIG_LCD_DT_SIMPLEFB
fbd5aeda HP	21	#define CONFIG_SYS_WHITE_ON_BLACK
	22	#define LCD_BPP LCD_COLOR32
	23
cf1331f8 HP	24	#define CONFIG_HW_WATCHDOG
	25	#define CONFIG_OMAP_WATCHDOG
	26	#define CONFIG_SPL_WATCHDOG_SUPPORT
d79c138c HP	27
d79c138c HP	28	#define CONFIG_SPL_GPIO_SUPPORT
df770945 HP	29	/* Bootcount using the RTC block */
	30	#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
	31	#define CONFIG_BOOTCOUNT_LIMIT
	32	#define CONFIG_BOOTCOUNT_AM33XX
893c04e1 HP	33	/* Clock Defines */
	34	#define V_OSCK 26000000 /* Clock output from T2 */
	35	#define V_SCLK (V_OSCK)
	36
	37	#define CONFIG_POWER_TPS65217
	38
	39	/* Support both device trees and ATAGs. */
	40	#define CONFIG_OF_LIBFDT
fbd5aeda HP	41	#define CONFIG_USE_FDT /* use fdt within board code */
fbd5aeda HP	42	#define CONFIG_OF_BOARD_SETUP
893c04e1 HP	43	#define CONFIG_CMDLINE_TAG
	44	#define CONFIG_SETUP_MEMORY_TAGS
	45	#define CONFIG_INITRD_TAG
	46	#define CONFIG_CMD_BOOTZ
	47	/#define CONFIG_MACH_TYPE 3589/
	48	#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
	49
	50	/* MMC/SD IP block */
	51	#if defined(CONFIG_EMMC_BOOT)
	52	#define CONFIG_MMC
	53	#define CONFIG_GENERIC_MMC
	54	#define CONFIG_OMAP_HSMMC
	55	#define CONFIG_CMD_MMC
	56	#define CONFIG_SUPPORT_EMMC_BOOT
	57	/* RAW SD card / eMMC locations. */
	58	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /addr. 0x60000 /
	59	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
	60	#define CONFIG_SPL_MMC_SUPPORT
	61	#endif /* CONFIG_EMMC_BOOT */
	62
	63	/*
	64	* When we have SPI or NAND flash we expect to be making use of mtdparts,
	65	* both for ease of use in U-Boot and for passing information on to
	66	* the Linux kernel.
	67	*/
	68	#if defined(CONFIG_SPI_BOOT) \|\| defined(CONFIG_NAND)
	69	#define CONFIG_MTD_DEVICE /* Required for mtdparts */
	70	#define CONFIG_CMD_MTDPARTS
	71	#endif /* CONFIG_SPI_BOOT, ... */
	72
	73	#undef CONFIG_SPL_OS_BOOT
	74	#ifdef CONFIG_SPL_OS_BOOT
	75	#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000
	76
	77	/* RAW SD card / eMMC */
	78	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
	79	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
	80	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
	81
	82	/* NAND */
	83	#ifdef CONFIG_NAND
	84	#define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */
	85	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000
	86	#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
	87	#endif /* CONFIG_NAND */
	88	#endif /* CONFIG_SPL_OS_BOOT */
	89
	90	#ifdef CONFIG_NAND
	91	#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
	92	#define CONFIG_SPL_NAND_SUPPORT
	93	#define CONFIG_SPL_NAND_BASE
	94	#define CONFIG_SPL_NAND_DRIVERS
	95	#define CONFIG_SPL_NAND_ECC
	96	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	97	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	98	#endif /* CONFIG_NAND */
	99
662a4765 HP	100	/* Always 64 KiB env size */
662a4765 HP	101	#define CONFIG_ENV_SIZE (64 << 10)
893c04e1 HP	102
	103	#ifdef CONFIG_NAND
	104	#define NANDARGS \
	105	"mtdids=" MTDIDS_DEFAULT "\0" \
	106	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	107	"nandargs=setenv bootargs console=${console} " \
	108	"${optargs} " \
d804452b	109	"${optargs_rot} " \
d79c138c HP	110	"root=mtd6 " \
	111	"rootfstype=jffs2\0" \
	112	"kernelsize=0x400000\0" \
	113	"nandboot=echo booting from nand ...; " \
893c04e1	114	"run nandargs; " \
d79c138c HP	115	"nand read ${loadaddr} kernel ${kernelsize}; " \
	116	"bootz ${loadaddr} - ${dtbaddr}\0" \
	117	"defboot=run nandboot\0" \
	118	"bootlimit=1\0" \
99f72472	119	"simplefb=1\0 " \
d79c138c	120	"altbootcmd=run usbscript\0"
893c04e1 HP	121	#else
	122	#define NANDARGS ""
	123	#endif /* CONFIG_NAND */
	124
	125	#ifdef CONFIG_MMC
	126	#define MMCARGS \
662a4765 HP	127	"dtbdev=mmc\0" \
662a4765 HP	128	"dtbpart=0:1\0" \
d804452b HP	129	"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
	130	"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
	131	"root=/dev/mmcblk0p2 rootfstype=ext4\0" \
662a4765	132	"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
99f72472	133	"setenv simplefb 1; " \
662a4765 HP	134	"ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
	135	"ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
	136	"run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
	137	"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
99f72472	138	"setenv simplefb 0; " \
662a4765 HP	139	"ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
662a4765 HP	140	"run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
4e2a3415	141	"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
662a4765 HP	142	"ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
	143	"run ramboot; run usbupdate;\0" \
	144	"bootlimit=1\0" \
4e2a3415	145	"altbootcmd=run mmcboot0;\0" \
662a4765 HP	146	"upduboot=dhcp; " \
	147	"tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
	148	"tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
893c04e1 HP	149	#else
	150	#define MMCARGS ""
	151	#endif /* CONFIG_MMC */
	152
	153	#ifndef CONFIG_SPL_BUILD
	154	#define CONFIG_EXTRA_ENV_SETTINGS \
7ae47f6b	155	BUR_COMMON_ENV \
662a4765	156	"verify=no\0" \
7ae47f6b	157	"autoload=0\0" \
662a4765 HP	158	"dtb=bur-ppt-ts30.dtb\0" \
	159	"dtbaddr=0x80100000\0" \
	160	"loadaddr=0x80200000\0" \
	161	"ramaddr=0x80A00000\0" \
	162	"kernel=zImage\0" \
	163	"ramdisk=rootfs.cpio.uboot\0" \
	164	"console=ttyO0,115200n8\0" \
	165	"optargs=consoleblank=0 quiet lpj=1191936 panic=2\0" \
	166	"nfsroot=/tftpboot/tseries/rootfs-small\0" \
	167	"nfsopts=nolock\0" \
	168	"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
	169	"netargs=setenv bootargs console=${console} " \
	170	"${optargs} " \
	171	"root=/dev/nfs " \
	172	"nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
	173	"ip=dhcp\0" \
	174	"netboot=echo Booting from network ...; " \
	175	"dhcp; " \
	176	"tftp ${loadaddr} ${kernel}; " \
	177	"tftp ${dtbaddr} ${dtb}; " \
	178	"run netargs; " \
	179	"bootz ${loadaddr} - ${dtbaddr}\0" \
	180	"ramboot=echo Booting from network into RAM ...; "\
	181	"if dhcp; then; " \
	182	"tftp ${loadaddr} ${kernel}; " \
	183	"tftp ${ramaddr} ${ramdisk}; " \
	184	"if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
	185	"then; else tftp ${dtbaddr} ${dtb}; fi;" \
	186	"run mmcroot0; " \
	187	"bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
	188	"usbupdate=echo Updating UBOOT from USB-Stick ...; " \
	189	"usb start && fatload usb 0 0x80000000 updateubootusb.img && source\0" \
	190	"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
	191	"setenv autoload 0; " \
	192	"dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
7ae47f6b HP	193	NANDARGS \
7ae47f6b HP	194	MMCARGS
893c04e1 HP	195	#endif /* !CONFIG_SPL_BUILD*/
	196
	197	#define CONFIG_BOOTCOMMAND \
662a4765 HP	198	"run defboot;"
662a4765 HP	199	#define CONFIG_BOOTDELAY 0
893c04e1 HP	200
	201	#ifdef CONFIG_NAND
	202	/*
	203	* GPMC block. We support 1 device and the physical address to
	204	* access CS0 at is 0x8000000.
	205	*/
	206	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	207	#define CONFIG_SYS_NAND_BASE 0x8000000
	208	#define CONFIG_NAND_OMAP_GPMC
	209	#define CONFIG_CMD_NAND
	210	/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
	211	#define CONFIG_NAND_OMAP_ELM
	212	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
893c04e1 HP	213	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	214	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	215	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	216	#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
	217	CONFIG_SYS_NAND_PAGE_SIZE)
	218	#define CONFIG_SYS_NAND_OOBSIZE 64
	219	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	220	#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
	221	10, 11, 12, 13, 14, 15, 16, 17, \
	222	18, 19, 20, 21, 22, 23, 24, 25, \
	223	26, 27, 28, 29, 30, 31, 32, 33, \
	224	34, 35, 36, 37, 38, 39, 40, 41, \
	225	42, 43, 44, 45, 46, 47, 48, 49, \
	226	50, 51, 52, 53, 54, 55, 56, 57, }
	227
	228	#define CONFIG_SYS_NAND_ECCSIZE 512
	229	#define CONFIG_SYS_NAND_ECCBYTES 14
	230
	231	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	232	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	233
	234	#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
	235	#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
d79c138c HP	236	"128k(MLO)," \
	237	"128k(MLO.backup)," \
	238	"128k(dtb)," \
893c04e1	239	"128k(u-boot-env)," \
d79c138c HP	240	"512k(u-boot)," \
	241	"4m(kernel),"\
	242	"128m(rootfs),"\
	243	"-(user)"
	244	#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
893c04e1 HP	245	#endif /* CONFIG_NAND */
	246
	247	/* USB configuration */
	248	#define CONFIG_USB_MUSB_DSPS
	249	#define CONFIG_ARCH_MISC_INIT
	250	#define CONFIG_MUSB_PIO_ONLY
	251	#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
	252	/* attention! not only for gadget, enables also highspeed in hostmode */
	253	#define CONFIG_USB_GADGET_DUALSPEED
	254	#define CONFIG_MUSB_HOST
	255	#define CONFIG_AM335X_USB0
	256	#define CONFIG_AM335X_USB0_MODE MUSB_HOST
	257	#define CONFIG_AM335X_USB1
	258	#define CONFIG_AM335X_USB1_MODE MUSB_HOST
	259
	260	#ifdef CONFIG_MUSB_HOST
	261	#define CONFIG_CMD_USB
	262	#define CONFIG_USB_STORAGE
	263	#endif /* CONFIG_MUSB_HOST */
	264
	265	#if defined(CONFIG_SPI_BOOT)
	266	/* McSPI IP block */
	267	#define CONFIG_SPI
	268	#define CONFIG_OMAP3_SPI
	269	#define CONFIG_CMD_SPI
	270	#define CONFIG_CMD_SF
	271	#define CONFIG_SPI_FLASH
	272	#define CONFIG_SPI_FLASH_STMICRO
	273	#define CONFIG_SF_DEFAULT_SPEED 24000000
	274
	275	#define CONFIG_SPL_SPI_SUPPORT
	276	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	277	#define CONFIG_SPL_SPI_LOAD
893c04e1 HP	278	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
	279	#undef CONFIG_ENV_IS_NOWHERE
	280	#define CONFIG_ENV_IS_IN_SPI_FLASH
	281	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	282	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	283	#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
	284	#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
	285	#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
	286
	287	#elif defined(CONFIG_EMMC_BOOT)
	288	#undef CONFIG_ENV_IS_NOWHERE
	289	#define CONFIG_ENV_IS_IN_MMC
46c8ebc8	290	#define CONFIG_SYS_MMC_ENV_DEV 0
893c04e1 HP	291	#define CONFIG_SYS_MMC_ENV_PART 2
	292	#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */
	293	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	294	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	295
	296	#elif defined(CONFIG_NAND)
e017fd61 TR	297	/* No NAND env support in SPL */
	298	#ifdef CONFIG_SPL_BUILD
	299	#define CONFIG_ENV_IS_NOWHERE
	300	#else
893c04e1	301	#define CONFIG_ENV_IS_IN_NAND
e017fd61	302	#endif
d79c138c	303	#define CONFIG_ENV_OFFSET 0x60000
893c04e1 HP	304	#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
	305	#else
	306	#error "no storage for Environment defined!"
	307	#endif
	308	/*
	309	* Common filesystems support. When we have removable storage we
	310	* enabled a number of useful commands and support.
	311	*/
	312	#if defined(CONFIG_MMC) \|\| defined(CONFIG_USB_STORAGE)
	313	#define CONFIG_DOS_PARTITION
	314	#define CONFIG_CMD_FAT
	315	#define CONFIG_FAT_WRITE
c05c2967 HP	316	#define CONFIG_FS_EXT4
	317	#define CONFIG_EXT4_WRITE
	318	#define CONFIG_CMD_EXT4
	319	#define CONFIG_CMD_EXT4_WRITE
893c04e1 HP	320	#define CONFIG_CMD_FS_GENERIC
	321	#endif /* CONFIG_MMC, ... */
	322
	323	#endif /* ! __CONFIG_TSERIES_H__ */