[people/ms/u-boot.git] / include / configs / usbarmory.h

/*
 * USB armory MkI board configuration settings
 * http://inversepath.com/usbarmory
 *
 * Copyright (C) 2015, Inverse Path
 * Andrej Rosano <andrej@inversepath.com>
 *
 * SPDX-License-Identifier:|____GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MX53
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_FSL_CLK
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO

#include <asm/arch/imx-regs.h>

#include <config_distro_defaults.h>

/* U-Boot commands */
#define CONFIG_CMD_MEMTEST

/* U-Boot environment */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_OFFSET	(6 * 64 * 1024)
#define CONFIG_ENV_SIZE		(8 * 1024)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV	0

/* U-Boot general configurations */
#define CONFIG_SYS_CBSIZE	512
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS	16
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE

/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART1_BASE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE		115200

/* SD/MMC */
#define CONFIG_CMD_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC

/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX5
#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORT	1
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* I2C */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */

/* Fuse */
#define CONFIG_CMD_FUSE
#define CONFIG_FSL_IIM

/* Linux boot */
#define CONFIG_LOADADDR		0x72000000
#define CONFIG_SYS_TEXT_BASE	0x77800000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
#define CONFIG_HOSTNAME		usbarmory
#define CONFIG_BOOTCOMMAND						\
	"run distro_bootcmd; "						\
	"setenv bootargs console=${console} ${bootargs_default}; "	\
	"ext2load mmc 0:1 ${kernel_addr_r} /boot/uImage; "		\
	"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "		\
	"bootm ${kernel_addr_r} - ${fdt_addr_r}"

#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)

#include <config_distro_bootcmd.h>

#define MEM_LAYOUT_ENV_SETTINGS			\
	"kernel_addr_r=0x70800000\0"		\
	"fdt_addr_r=0x71000000\0"		\
	"scriptaddr=0x70800000\0"		\
	"pxefile_addr_r=0x70800000\0"		\
	"ramdisk_addr_r=0x73000000\0"

#define CONFIG_EXTRA_ENV_SETTINGS				\
	MEM_LAYOUT_ENV_SETTINGS					\
	"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0"	\
	"fdtfile=imx53-usbarmory.dtb\0"				\
	"console=ttymxc0,115200\0"				\
	BOOTENV

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			CSD0_BASE_ADDR
#define PHYS_SDRAM_SIZE			(gd->ram_size)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MEMTEST_START	0x70000000
#define CONFIG_SYS_MEMTEST_END		0x90000000

#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#endif				/* __CONFIG_H */
Commit	Line	Data
3bf801a2 AR	1	/*
	2	* USB armory MkI board configuration settings
	3	* http://inversepath.com/usbarmory
	4	*
	5	* Copyright (C) 2015, Inverse Path
	6	* Andrej Rosano <andrej@inversepath.com>
	7	*
	8	* SPDX-License-Identifier:\|____GPL-2.0+
	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	#define CONFIG_MX53
	15	#define CONFIG_DISPLAY_CPUINFO
	16	#define CONFIG_DISPLAY_BOARDINFO
18fb0e3c	17	#define CONFIG_SYS_FSL_CLK
3bf801a2	18	#define CONFIG_BOARD_EARLY_INIT_F
3bf801a2 AR	19	#define CONFIG_MXC_GPIO
	20
	21	#include <asm/arch/imx-regs.h>
3bf801a2 AR	22
	23	#include <config_distro_defaults.h>
	24
	25	/* U-Boot commands */
	26	#define CONFIG_CMD_MEMTEST
3bf801a2 AR	27
	28	/* U-Boot environment */
	29	#define CONFIG_ENV_OVERWRITE
	30	#define CONFIG_SYS_NO_FLASH
	31	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	32	#define CONFIG_ENV_SIZE (8 * 1024)
	33	#define CONFIG_ENV_IS_IN_MMC
	34	#define CONFIG_SYS_MMC_ENV_DEV 0
	35
	36	/* U-Boot general configurations */
	37	#define CONFIG_SYS_CBSIZE 512
	38	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	39	#define CONFIG_SYS_MAXARGS 16
	40	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	41
	42	/* UART */
	43	#define CONFIG_MXC_UART
	44	#define CONFIG_MXC_UART_BASE UART1_BASE
	45	#define CONFIG_CONS_INDEX 1
	46	#define CONFIG_BAUDRATE 115200
	47
	48	/* SD/MMC */
	49	#define CONFIG_CMD_MMC
	50	#define CONFIG_FSL_ESDHC
	51	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	52	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	53	#define CONFIG_MMC
	54	#define CONFIG_GENERIC_MMC
	55
	56	/* USB */
	57	#define CONFIG_CMD_USB
	58	#define CONFIG_USB_EHCI
	59	#define CONFIG_USB_EHCI_MX5
	60	#define CONFIG_USB_STORAGE
	61	#define CONFIG_MXC_USB_PORT 1
	62	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	63	#define CONFIG_MXC_USB_FLAGS 0
	64
	65	/* I2C */
	66	#define CONFIG_CMD_I2C
	67	#define CONFIG_SYS_I2C
	68	#define CONFIG_SYS_I2C_MXC
03544c66 AA	69	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	70	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
3bf801a2 AR	71
	72	/* Fuse */
	73	#define CONFIG_CMD_FUSE
	74	#define CONFIG_FSL_IIM
	75
	76	/* Linux boot */
	77	#define CONFIG_LOADADDR 0x72000000
	78	#define CONFIG_SYS_TEXT_BASE 0x77800000
	79	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	80	#define CONFIG_HOSTNAME usbarmory
	81	#define CONFIG_BOOTCOMMAND \
	82	"run distro_bootcmd; " \
	83	"setenv bootargs console=${console} ${bootargs_default}; " \
	84	"ext2load mmc 0:1 ${kernel_addr_r} /boot/uImage; " \
	85	"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
	86	"bootm ${kernel_addr_r} - ${fdt_addr_r}"
	87
	88	#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
	89
	90	#include <config_distro_bootcmd.h>
	91
	92	#define MEM_LAYOUT_ENV_SETTINGS \
	93	"kernel_addr_r=0x70800000\0" \
	94	"fdt_addr_r=0x71000000\0" \
	95	"scriptaddr=0x70800000\0" \
	96	"pxefile_addr_r=0x70800000\0" \
	97	"ramdisk_addr_r=0x73000000\0"
	98
	99	#define CONFIG_EXTRA_ENV_SETTINGS \
	100	MEM_LAYOUT_ENV_SETTINGS \
	101	"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
	102	"fdtfile=imx53-usbarmory.dtb\0" \
	103	"console=ttymxc0,115200\0" \
	104	BOOTENV
	105
	106	/* Physical Memory Map */
	107	#define CONFIG_NR_DRAM_BANKS 1
	108	#define PHYS_SDRAM CSD0_BASE_ADDR
	109	#define PHYS_SDRAM_SIZE (gd->ram_size)
	110
	111	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	112	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	113	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	114
	115	#define CONFIG_SYS_INIT_SP_OFFSET \
	116	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	117	#define CONFIG_SYS_INIT_SP_ADDR \
	118	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	119
	120	#define CONFIG_SYS_MEMTEST_START 0x70000000
	121	#define CONFIG_SYS_MEMTEST_END 0x90000000
	122
	123	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	124
	125	#endif /* __CONFIG_H */