[people/ms/u-boot.git] / include / configs / v38b.h

/*
 * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
 * wd@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU */
#define CONFIG_V38B			1	/* ...on V38B board */

#define	CONFIG_SYS_TEXT_BASE		0xFF000000

#define CONFIG_SYS_MPC5XXX_CLKIN	33000000	/* ...running at 33.000000MHz */

#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC */
#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM */

#undef CONFIG_HW_WATCHDOG			/* don't use watchdog */

#define CONFIG_NETCONSOLE		1

#define CONFIG_BOARD_EARLY_INIT_R	1	/* do board-specific init */
#define CONFIG_MISC_INIT_R

#define CONFIG_SYS_XLB_PIPELINING		1	/* gives better performance */

#define CONFIG_HIGH_BATS	1	/* High BATs supported */

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/*
 * DDR
 */
#define SDRAM_DDR		1	/* is DDR */
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE		0x018D0000
#define SDRAM_EMODE		0x40090000
#define SDRAM_CONTROL		0x704f0f00
#define SDRAM_CONFIG1		0x73722930
#define SDRAM_CONFIG2		0x47770000
#define SDRAM_TAPDELAY		0x10000000

/*
 * PCI - no support
 */

/*
 * Partitions
 */
#define CONFIG_MAC_PARTITION	1
#define CONFIG_DOS_PARTITION	1

/*
 * USB
 */
#define CONFIG_USB_OHCI
#define CONFIG_USB_CLOCK	0x0001BBBB
#define CONFIG_USB_CONFIG	0x00001000

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_DATE

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

/*
 * Boot low with 16 MB Flash
 */
#define CONFIG_SYS_LOWBOOT		1
#define CONFIG_SYS_LOWBOOT16		1

/*
 * Autobooting
 */

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

#undef CONFIG_BOOTARGS

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"bootcmd=run net_nfs\0"						\
	"bootdelay=3\0"							\
	"baudrate=115200\0"						\
	"preboot=echo;echo Type \"run flash_nfs\" to mount root "	\
		"filesystem over NFS; echo\0"				\
	"netdev=eth0\0"							\
	"ramargs=setenv bootargs root=/dev/ram rw wdt=off \0"		\
	"addip=setenv bootargs $(bootargs) "				\
		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
		"$(ramdisk_addr)\0"					\
	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=$(serverip):$(rootpath) wdt=off\0"		\
	"hostname=v38b\0"						\
	"ethact=FEC\0"							\
	"rootpath=/opt/eldk-3.1.1/ppc_6xx\0"				\
	"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; "	\
		"cp.b 200000 ff000000 $(filesize);"			\
		"prot on ff000000 ff03ffff\0"				\
	"load=tftp 200000 $(u-boot)\0"					\
	"netmask=255.255.0.0\0"						\
	"ipaddr=192.168.160.18\0"					\
	"serverip=192.168.1.1\0"					\
	"bootfile=/tftpboot/v38b/uImage\0"				\
	"u-boot=/tftpboot/v38b/u-boot.bin\0"				\
	""

#define CONFIG_BOOTCOMMAND	"run net_nfs"

/*
 * IPB Bus clocking configuration.
 */
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */

/*
 * I2C configuration
 */
#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
#define CONFIG_SYS_I2C_SLAVE		0x7F

/*
 * EEPROM configuration
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70

/*
 * RTC configuration
 */
#define CONFIG_SYS_I2C_RTC_ADDR		0x51

/*
 * Flash configuration - use CFI driver
 */
#define CONFIG_SYS_FLASH_CFI		1		/* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER	1		/* Use the common driver */
#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1
#define CONFIG_SYS_FLASH_BASE		0xFF000000
#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max num of flash banks */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_FLASH_SIZE		0x01000000	/* 16 MiB */
#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max num of sects on one chip */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)
#define CONFIG_ENV_SIZE		0x10000
#define CONFIG_ENV_SECT_SIZE	0x10000
#define CONFIG_ENV_OVERWRITE	1

/*
 * Memory map
 */
#define CONFIG_SYS_MBAR		0xF0000000
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_DEFAULT_MBAR	0x80000000

/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE	/* Size of used area in DPRAM */

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#   define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128kB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Linux initial memory map */

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC	1
#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR		0x00
#define CONFIG_MII		1

/*
 * GPIO configuration
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0x90001404

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM */

#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */

#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif

/*
 * Various low-level settings
 */
#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE

#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_BOOTCS_CFG		0x00047801
#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE

#define CONFIG_SYS_CS_BURST		0x00000000
#define CONFIG_SYS_CS_DEADCYCLE	0x33333333

#define CONFIG_SYS_RESET_ADDRESS	0xff000000

/*
 * IDE/ATA (supports IDE harddisk)
 */
#undef CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT		/* Direct IDE not supported */
#undef CONFIG_IDE_LED			/* LED for ide not supported */

#define CONFIG_IDE_RESET		/* reset for ide supported */
#define CONFIG_IDE_PREINIT

#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus */
#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus */

#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000

#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA

#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)	/* data I/O offset */

#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)	/* normal register accesses offset */

#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)	/* alternate registers offset */

#define CONFIG_SYS_ATA_STRIDE		4		/* Interval between registers */

/*
 * Status LED
 */

#define CONFIG_SYS_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
#ifndef __ASSEMBLY__
typedef unsigned int led_id_t;

#define __led_toggle(_msk) \
	do { \
		*((volatile long *) (CONFIG_SYS_LED_BASE)) ^= (_msk); \
	} while(0)

#define __led_set(_msk, _st) \
	do { \
		if ((_st)) \
			*((volatile long *) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \
		else \
			*((volatile long *) (CONFIG_SYS_LED_BASE)) |= (_msk); \
	} while(0)

#define __led_init(_msk, st) \
	do { \
		*((volatile long *) (CONFIG_SYS_LED_BASE)) |= 0x34; \
	} while(0)
#endif /* __ASSEMBLY__ */

#endif /* __CONFIG_H */
Commit	Line	Data
4707fb50	1	/*
82d9c9ec	2	* (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
4707fb50 BS	3	* wd@denx.de.
4707fb50 BS	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
4707fb50 BS	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
4707fb50 BS	11	/*
	12	* High Level Configuration Options
	13	* (easy to change)
82d9c9ec	14	*/
82d9c9ec BS	15	#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
82d9c9ec BS	16	#define CONFIG_V38B 1 /* ...on V38B board */
2ae18241 WD	17
	18	#define CONFIG_SYS_TEXT_BASE 0xFF000000
	19
6d0f6bcf	20	#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */
4707fb50	21
82d9c9ec BS	22	#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
82d9c9ec BS	23	#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
4707fb50	24
ce3f1a40	25	#undef CONFIG_HW_WATCHDOG /* don't use watchdog */
4707fb50 BS	26
	27	#define CONFIG_NETCONSOLE 1
	28
82d9c9ec	29	#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */
d8d21e69	30	#define CONFIG_MISC_INIT_R
4707fb50	31
6d0f6bcf	32	#define CONFIG_SYS_XLB_PIPELINING 1 /* gives better performance */
4707fb50	33
31d82672 BB	34	#define CONFIG_HIGH_BATS 1 /* High BATs supported */
31d82672 BB	35
4707fb50 BS	36	/*
	37	* Serial console configuration
	38	*/
82d9c9ec BS	39	#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
82d9c9ec BS	40	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
6d0f6bcf	41	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
4707fb50	42
4707fb50 BS	43	/*
	44	* DDR
	45	*/
	46	#define SDRAM_DDR 1 /* is DDR */
	47	/* Settings for XLB = 132 MHz */
	48	#define SDRAM_MODE 0x018D0000
	49	#define SDRAM_EMODE 0x40090000
	50	#define SDRAM_CONTROL 0x704f0f00
	51	#define SDRAM_CONFIG1 0x73722930
	52	#define SDRAM_CONFIG2 0x47770000
	53	#define SDRAM_TAPDELAY 0x10000000
	54
4707fb50	55	/*
62a3b7dd	56	* PCI - no support
4707fb50	57	*/
4707fb50 BS	58
	59	/*
	60	* Partitions
	61	*/
	62	#define CONFIG_MAC_PARTITION 1
	63	#define CONFIG_DOS_PARTITION 1
	64
	65	/*
	66	* USB
	67	*/
	68	#define CONFIG_USB_OHCI
82d9c9ec BS	69	#define CONFIG_USB_CLOCK 0x0001BBBB
82d9c9ec BS	70	#define CONFIG_USB_CONFIG 0x00001000
4707fb50	71
079a136c JL	72	/*
	73	* BOOTP options
	74	*/
	75	#define CONFIG_BOOTP_BOOTFILESIZE
	76	#define CONFIG_BOOTP_BOOTPATH
	77	#define CONFIG_BOOTP_GATEWAY
	78	#define CONFIG_BOOTP_HOSTNAME
	79
4707fb50	80	/*
dca3b3d6	81	* Command line configuration.
4707fb50	82	*/
dca3b3d6	83	#define CONFIG_CMD_IDE
dca3b3d6 JL	84	#define CONFIG_CMD_DIAG
	85	#define CONFIG_CMD_IRQ
	86	#define CONFIG_CMD_JFFS2
dca3b3d6 JL	87	#define CONFIG_CMD_SDRAM
dca3b3d6 JL	88	#define CONFIG_CMD_DATE
4707fb50	89
dca3b3d6	90	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
4707fb50 BS	91
	92	/*
	93	* Boot low with 16 MB Flash
	94	*/
6d0f6bcf JCPV	95	#define CONFIG_SYS_LOWBOOT 1
6d0f6bcf JCPV	96	#define CONFIG_SYS_LOWBOOT16 1
4707fb50 BS	97
	98	/*
	99	* Autobooting
	100	*/
4707fb50	101
82d9c9ec	102	#define CONFIG_PREBOOT "echo;" \
32bf3d14	103	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
4707fb50 BS	104	"echo"
4707fb50 BS	105
82d9c9ec	106	#undef CONFIG_BOOTARGS
4707fb50	107
fcfed4f2	108	#define CONFIG_EXTRA_ENV_SETTINGS \
82d9c9ec BS	109	"bootcmd=run net_nfs\0" \
	110	"bootdelay=3\0" \
	111	"baudrate=115200\0" \
	112	"preboot=echo;echo Type \"run flash_nfs\" to mount root " \
	113	"filesystem over NFS; echo\0" \
fcfed4f2	114	"netdev=eth0\0" \
cce4acbb	115	"ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \
fcfed4f2 WD	116	"addip=setenv bootargs $(bootargs) " \
	117	"ip=$(ipaddr):$(serverip):$(gatewayip):" \
	118	"$(netmask):$(hostname):$(netdev):off panic=1\0" \
	119	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
	120	"flash_self=run ramargs addip;bootm $(kernel_addr) " \
	121	"$(ramdisk_addr)\0" \
82d9c9ec	122	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
fcfed4f2	123	"nfsargs=setenv bootargs root=/dev/nfs rw " \
cce4acbb	124	"nfsroot=$(serverip):$(rootpath) wdt=off\0" \
82d9c9ec	125	"hostname=v38b\0" \
48690d80	126	"ethact=FEC\0" \
82d9c9ec BS	127	"rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
	128	"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \
	129	"cp.b 200000 ff000000 $(filesize);" \
	130	"prot on ff000000 ff03ffff\0" \
	131	"load=tftp 200000 $(u-boot)\0" \
	132	"netmask=255.255.0.0\0" \
	133	"ipaddr=192.168.160.18\0" \
	134	"serverip=192.168.1.1\0" \
82d9c9ec BS	135	"bootfile=/tftpboot/v38b/uImage\0" \
82d9c9ec BS	136	"u-boot=/tftpboot/v38b/u-boot.bin\0" \
fcfed4f2	137	""
4707fb50 BS	138
	139	#define CONFIG_BOOTCOMMAND "run net_nfs"
	140
4707fb50 BS	141	/*
	142	* IPB Bus clocking configuration.
	143	*/
6d0f6bcf	144	#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
82d9c9ec	145
4707fb50 BS	146	/*
	147	* I2C configuration
	148	*/
	149	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
6d0f6bcf JCPV	150	#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
	151	#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
	152	#define CONFIG_SYS_I2C_SLAVE 0x7F
4707fb50 BS	153
	154	/*
	155	* EEPROM configuration
	156	*/
6d0f6bcf JCPV	157	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
	158	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	159	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	160	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
4707fb50 BS	161
	162	/*
	163	* RTC configuration
	164	*/
6d0f6bcf	165	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
4707fb50 BS	166
	167	/*
	168	* Flash configuration - use CFI driver
	169	*/
6d0f6bcf	170	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
00b1883a	171	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
6d0f6bcf JCPV	172	#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1
	173	#define CONFIG_SYS_FLASH_BASE 0xFF000000
	174	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
	175	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	176	#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* 16 MiB */
	177	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
	178	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */
4707fb50 BS	179
	180	/*
	181	* Environment settings
	182	*/
5a1aceb0	183	#define CONFIG_ENV_IS_IN_FLASH 1
6d0f6bcf	184	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000)
0e8d1586 JCPV	185	#define CONFIG_ENV_SIZE 0x10000
0e8d1586 JCPV	186	#define CONFIG_ENV_SECT_SIZE 0x10000
4707fb50 BS	187	#define CONFIG_ENV_OVERWRITE 1
	188
	189	/*
	190	* Memory map
	191	*/
6d0f6bcf JCPV	192	#define CONFIG_SYS_MBAR 0xF0000000
	193	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	194	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
4707fb50 BS	195
4707fb50 BS	196	/* Use SRAM until RAM will be available */
6d0f6bcf	197	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
553f0982	198	#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */
4707fb50	199
25ddd1fb	200	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
6d0f6bcf	201	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
4707fb50	202
14d0a02a	203	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
6d0f6bcf JCPV	204	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
6d0f6bcf JCPV	205	# define CONFIG_SYS_RAMBOOT 1
4707fb50 BS	206	#endif
4707fb50 BS	207
6d0f6bcf JCPV	208	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */
	209	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */
	210	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Linux initial memory map */
4707fb50 BS	211
	212	/*
	213	* Ethernet configuration
	214	*/
	215	#define CONFIG_MPC5xxx_FEC 1
86321fc1	216	#define CONFIG_MPC5xxx_FEC_MII100
4707fb50	217	#define CONFIG_PHY_ADDR 0x00
fcfed4f2	218	#define CONFIG_MII 1
4707fb50 BS	219
	220	/*
	221	* GPIO configuration
	222	*/
6d0f6bcf	223	#define CONFIG_SYS_GPS_PORT_CONFIG 0x90001404
4707fb50 BS	224
	225	/*
	226	* Miscellaneous configurable options
	227	*/
6d0f6bcf	228	#define CONFIG_SYS_LONGHELP /* undef to save memory */
dca3b3d6	229	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	230	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
4707fb50	231	#else
6d0f6bcf	232	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
4707fb50	233	#endif
6d0f6bcf JCPV	234	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	235	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	236	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
4707fb50	237
6d0f6bcf JCPV	238	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
6d0f6bcf JCPV	239	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
4707fb50	240
6d0f6bcf	241	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
4707fb50	242
6d0f6bcf	243	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
dca3b3d6	244	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	245	# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
dca3b3d6 JL	246	#endif
dca3b3d6 JL	247
4707fb50 BS	248	/*
	249	* Various low-level settings
	250	*/
6d0f6bcf JCPV	251	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
6d0f6bcf JCPV	252	#define CONFIG_SYS_HID0_FINAL HID0_ICE
4707fb50	253
6d0f6bcf JCPV	254	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	255	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	256	#define CONFIG_SYS_BOOTCS_CFG 0x00047801
	257	#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
	258	#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
4707fb50	259
6d0f6bcf JCPV	260	#define CONFIG_SYS_CS_BURST 0x00000000
6d0f6bcf JCPV	261	#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
4707fb50	262
6d0f6bcf	263	#define CONFIG_SYS_RESET_ADDRESS 0xff000000
4707fb50	264
82d9c9ec BS	265	/*
82d9c9ec BS	266	* IDE/ATA (supports IDE harddisk)
4707fb50	267	*/
82d9c9ec BS	268	#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
	269	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	270	#undef CONFIG_IDE_LED /* LED for ide not supported */
4707fb50	271
82d9c9ec	272	#define CONFIG_IDE_RESET /* reset for ide supported */
4707fb50 BS	273	#define CONFIG_IDE_PREINIT
4707fb50 BS	274
6d0f6bcf JCPV	275	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
6d0f6bcf JCPV	276	#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
4707fb50	277
6d0f6bcf	278	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
4707fb50	279
6d0f6bcf	280	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
4707fb50	281
6d0f6bcf	282	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) /* data I/O offset */
4707fb50	283
6d0f6bcf	284	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* normal register accesses offset */
4707fb50	285
6d0f6bcf	286	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */
4707fb50	287
6d0f6bcf	288	#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
4707fb50	289
82d9c9ec BS	290	/*
	291	* Status LED
	292	*/
4707fb50	293
6d0f6bcf	294	#define CONFIG_SYS_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */
4707fb50	295	#ifndef __ASSEMBLY__
4707fb50 BS	296	typedef unsigned int led_id_t;
	297
	298	#define __led_toggle(_msk) \
	299	do { \
6d0f6bcf	300	((volatile long ) (CONFIG_SYS_LED_BASE)) ^= (_msk); \
4707fb50 BS	301	} while(0)
	302
	303	#define __led_set(_msk, _st) \
	304	do { \
	305	if ((_st)) \
6d0f6bcf	306	((volatile long ) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \
4707fb50	307	else \
6d0f6bcf	308	((volatile long ) (CONFIG_SYS_LED_BASE)) \|= (_msk); \
4707fb50 BS	309	} while(0)
	310
	311	#define __led_init(_msk, st) \
82d9c9ec	312	do { \
6d0f6bcf	313	((volatile long ) (CONFIG_SYS_LED_BASE)) \|= 0x34; \
82d9c9ec BS	314	} while(0)
82d9c9ec BS	315	#endif /* __ASSEMBLY__ */
4707fb50 BS	316
4707fb50 BS	317	#endif /* __CONFIG_H */