[people/ms/u-boot.git] / include / configs / vexpress_aemv8a.h

/*
 * Configuration for Versatile Express. Parts were derived from other ARM
 *   configurations.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __VEXPRESS_AEMV8A_H
#define __VEXPRESS_AEMV8A_H

#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
#ifndef CONFIG_SEMIHOSTING
#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
#endif
#define CONFIG_ARMV8_SWITCH_TO_EL1
#endif

#define CONFIG_REMAKE_ELF

#define CONFIG_SUPPORT_RAW_INITRD

/* Cache Definitions */
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_ICACHE_OFF

#define CONFIG_IDENT_STRING		" vexpress_aemv8a"
#define CONFIG_BOOTP_VCI_STRING		"U-Boot.armv8.vexpress_aemv8a"

/* Link Definitions */
#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
/* ATF loads u-boot here for BASE_FVP model */
#define CONFIG_SYS_TEXT_BASE		0x88000000
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_SYS_TEXT_BASE		0xe0000000
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
#endif

#define CONFIG_SYS_BOOTM_LEN (64 << 20)      /* Increase max gunzip size */

/* CS register bases for the original memory map. */
#define V2M_PA_CS0			0x00000000
#define V2M_PA_CS1			0x14000000
#define V2M_PA_CS2			0x18000000
#define V2M_PA_CS3			0x1c000000
#define V2M_PA_CS4			0x0c000000
#define V2M_PA_CS5			0x10000000

#define V2M_PERIPH_OFFSET(x)		(x << 16)
#define V2M_SYSREGS			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
#define V2M_SYSCTL			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
#define V2M_SERIAL_BUS_PCI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))

#define V2M_BASE			0x80000000

/* Common peripherals relative to CS7. */
#define V2M_AACI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
#define V2M_MMCI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
#define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
#define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))

#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define V2M_UART0			0x7ff80000
#define V2M_UART1			0x7ff70000
#else /* Not Juno */
#define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
#define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
#define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
#define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
#endif

#define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))

#define V2M_TIMER01			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
#define V2M_TIMER23			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))

#define V2M_SERIAL_BUS_DVI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
#define V2M_RTC				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))

#define V2M_CF				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))

#define V2M_CLCD			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))

/* System register offsets. */
#define V2M_SYS_CFGDATA			(V2M_SYSREGS + 0x0a0)
#define V2M_SYS_CFGCTRL			(V2M_SYSREGS + 0x0a4)
#define V2M_SYS_CFGSTAT			(V2M_SYSREGS + 0x0a8)

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		(0x1800000)	/* 24MHz */

/* Generic Interrupt Controller Definitions */
#ifdef CONFIG_GICV3
#define GICD_BASE			(0x2f000000)
#define GICR_BASE			(0x2f100000)
#else

#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
#define GICD_BASE			(0x2f000000)
#define GICC_BASE			(0x2c000000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
#define GICD_BASE			(0x2C010000)
#define GICC_BASE			(0x2C02f000)
#endif
#endif /* !CONFIG_GICV3 */

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))

/* Ethernet Configuration */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
/* The real hardware Versatile express uses SMSC9118 */
#define CONFIG_SMC911X			1
#define CONFIG_SMC911X_32_BIT		1
#define CONFIG_SMC911X_BASE		(0x018000000)
#else
/* The Vexpress64 simulators use SMSC91C111 */
#define CONFIG_SMC91111			1
#define CONFIG_SMC91111_BASE		(0x01A000000)
#endif

/* PL011 Serial Configuration */
#define CONFIG_BAUDRATE			115200
#define CONFIG_CONS_INDEX		0
#define CONFIG_PL01X_SERIAL
#define CONFIG_PL011_SERIAL
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_PL011_CLOCK		7273800
#else
#define CONFIG_PL011_CLOCK		24000000
#endif

/* Command line configuration */
#define CONFIG_MENU
/*#define CONFIG_MENU_SHOW*/
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_BOOTI
#define CONFIG_CMD_UNZIP
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PXE
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_PXE
#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)

/* Physical Memory Map */
#define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
/* Top 16MB reserved for secure world use */
#define DRAM_SEC_SIZE		0x01000000
#define PHYS_SDRAM_1_SIZE	0x80000000 - DRAM_SEC_SIZE
#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1

#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_2			(0x880000000)
#define PHYS_SDRAM_2_SIZE		0x180000000
#else
#define CONFIG_NR_DRAM_BANKS		1
#endif

/* Enable memtest */
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)

/* Initial environment variables */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
/*
 * Defines where the kernel and FDT exist in NOR flash and where it will
 * be copied into DRAM
 */
#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_name=norkern\0"	\
				"kernel_alt_name=Image\0"	\
				"kernel_addr=0x80080000\0" \
				"initrd_name=ramdisk.img\0"	\
				"initrd_addr=0x84000000\0"	\
				"fdt_name=board.dtb\0" \
				"fdt_alt_name=juno\0" \
				"fdt_addr=0x83000000\0" \
				"fdt_high=0xffffffffffffffff\0" \
				"initrd_high=0xffffffffffffffff\0" \

/* Assume we boot with root on the first partition of a USB stick */
#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 " \
				"root=/dev/sda2 rw " \
				"rootwait "\
				"earlyprintk=pl011,0x7ff80000 debug "\
				"user_debug=31 "\
				"androidboot.hardware=juno "\
				"loglevel=9"

/* Copy the kernel and FDT to DRAM memory and boot */
#define CONFIG_BOOTCOMMAND	"afs load ${kernel_name} ${kernel_addr} ; " \
				"if test $? -eq 1; then "\
				"  echo Loading ${kernel_alt_name} instead of "\
				"${kernel_name}; "\
				"  afs load ${kernel_alt_name} ${kernel_addr};"\
				"fi ; "\
				"afs load  ${fdt_name} ${fdt_addr} ; " \
				"if test $? -eq 1; then "\
				"  echo Loading ${fdt_alt_name} instead of "\
				"${fdt_name}; "\
				"  afs load ${fdt_alt_name} ${fdt_addr}; "\
				"fi ; "\
				"fdt addr ${fdt_addr}; fdt resize; " \
				"if afs load  ${initrd_name} ${initrd_addr} ; "\
				"then "\
				"  setenv initrd_param ${initrd_addr}; "\
				"  else setenv initrd_param -; "\
				"fi ; " \
				"booti ${kernel_addr} ${initrd_param} ${fdt_addr}"

#define CONFIG_BOOTDELAY		1

#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_name=Image\0"		\
				"kernel_addr=0x80080000\0"	\
				"initrd_name=ramdisk.img\0"	\
				"initrd_addr=0x88000000\0"	\
				"fdt_name=devtree.dtb\0"	\
				"fdt_addr=0x83000000\0"		\
				"fdt_high=0xffffffffffffffff\0"	\
				"initrd_high=0xffffffffffffffff\0"

#define CONFIG_BOOTARGS		"console=ttyAMA0 earlyprintk=pl011,"\
				"0x1c090000 debug user_debug=31 "\
				"loglevel=9"

#define CONFIG_BOOTCOMMAND	"smhload ${kernel_name} ${kernel_addr}; " \
				"smhload ${fdt_name} ${fdt_addr}; " \
				"smhload ${initrd_name} ${initrd_addr} "\
				"initrd_end; " \
				"fdt addr ${fdt_addr}; fdt resize; " \
				"fdt chosen ${initrd_addr} ${initrd_end}; " \
				"booti $kernel_addr - $fdt_addr"

#define CONFIG_BOOTDELAY		1

#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_addr=0x80080000\0"	\
				"initrd_addr=0x84000000\0"	\
				"fdt_addr=0x83000000\0"		\
				"fdt_high=0xffffffffffffffff\0"	\
				"initrd_high=0xffffffffffffffff\0"

#define CONFIG_BOOTARGS		"console=ttyAMA0 earlyprintk=pl011,"\
				"0x1c090000 debug user_debug=31 "\
				"androidboot.hardware=fvpbase "\
				"root=/dev/vda2 rw "\
				"rootwait "\
				"loglevel=9"

#define CONFIG_BOOTCOMMAND	"booti $kernel_addr $initrd_addr $fdt_addr"

#define CONFIG_BOOTDELAY		1

#endif

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64	/* max command args */

#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_SYS_FLASH_BASE		0x08000000
/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
#define CONFIG_SYS_MAX_FLASH_SECT	259
/* Store environment at top of flash in the same location as blank.img */
/* in the Juno firmware. */
#define CONFIG_ENV_ADDR			0x0BFC0000
#define CONFIG_ENV_SECT_SIZE		0x00010000
#else
#define CONFIG_SYS_FLASH_BASE		0x0C000000
/* 256 x 256KiB sectors */
#define CONFIG_SYS_MAX_FLASH_SECT	256
/* Store environment at top of flash */
#define CONFIG_ENV_ADDR			0x0FFC0000
#define CONFIG_ENV_SECT_SIZE		0x00040000
#endif

#define CONFIG_CMD_ARMFLASH
#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
#define CONFIG_SYS_MAX_FLASH_BANKS	1

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
#define FLASH_MAX_SECTOR_SIZE		0x00040000
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_IS_IN_FLASH		1


#endif /* __VEXPRESS_AEMV8A_H */
Commit	Line	Data
12916829 DF	1	/*
	2	* Configuration for Versatile Express. Parts were derived from other ARM
	3	* configurations.
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __VEXPRESS_AEMV8A_H
	9	#define __VEXPRESS_AEMV8A_H
	10
f91afc4d	11	#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
261d2760	12	#ifndef CONFIG_SEMIHOSTING
f91afc4d	13	#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
261d2760	14	#endif
261d2760 DR	15	#define CONFIG_ARMV8_SWITCH_TO_EL1
	16	#endif
	17
12916829 DF	18	#define CONFIG_REMAKE_ELF
12916829 DF	19
12916829 DF	20	#define CONFIG_SUPPORT_RAW_INITRD
	21
	22	/* Cache Definitions */
	23	#define CONFIG_SYS_DCACHE_OFF
	24	#define CONFIG_SYS_ICACHE_OFF
	25
	26	#define CONFIG_IDENT_STRING " vexpress_aemv8a"
a187559e	27	#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv8.vexpress_aemv8a"
12916829 DF	28
12916829 DF	29	/* Link Definitions */
fc04b923 RH	30	#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) \|\| \
fc04b923 RH	31	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
261d2760 DR	32	/* ATF loads u-boot here for BASE_FVP model */
	33	#define CONFIG_SYS_TEXT_BASE 0x88000000
	34	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
ffc10373 LW	35	#elif CONFIG_TARGET_VEXPRESS64_JUNO
	36	#define CONFIG_SYS_TEXT_BASE 0xe0000000
	37	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
261d2760	38	#endif
12916829	39
0d3012af RH	40	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
0d3012af RH	41
12916829 DF	42	/* CS register bases for the original memory map. */
	43	#define V2M_PA_CS0 0x00000000
	44	#define V2M_PA_CS1 0x14000000
	45	#define V2M_PA_CS2 0x18000000
	46	#define V2M_PA_CS3 0x1c000000
	47	#define V2M_PA_CS4 0x0c000000
	48	#define V2M_PA_CS5 0x10000000
	49
	50	#define V2M_PERIPH_OFFSET(x) (x << 16)
	51	#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
	52	#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
	53	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
	54
	55	#define V2M_BASE 0x80000000
	56
12916829 DF	57	/* Common peripherals relative to CS7. */
	58	#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
	59	#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
	60	#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
	61	#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
	62
ffc10373 LW	63	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	64	#define V2M_UART0 0x7ff80000
	65	#define V2M_UART1 0x7ff70000
	66	#else /* Not Juno */
12916829 DF	67	#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
	68	#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
	69	#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
	70	#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
ffc10373	71	#endif
12916829 DF	72
	73	#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
	74
	75	#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
	76	#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
	77
	78	#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
	79	#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
	80
	81	#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
	82
	83	#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
	84
	85	/* System register offsets. */
	86	#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
	87	#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
	88	#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
	89
	90	/* Generic Timer Definitions */
	91	#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */
	92
	93	/* Generic Interrupt Controller Definitions */
c71645ad DF	94	#ifdef CONFIG_GICV3
	95	#define GICD_BASE (0x2f000000)
	96	#define GICR_BASE (0x2f100000)
	97	#else
261d2760	98
fc04b923 RH	99	#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) \|\| \
fc04b923 RH	100	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
261d2760 DR	101	#define GICD_BASE (0x2f000000)
261d2760 DR	102	#define GICC_BASE (0x2c000000)
ffc10373 LW	103	#elif CONFIG_TARGET_VEXPRESS64_JUNO
	104	#define GICD_BASE (0x2C010000)
	105	#define GICC_BASE (0x2C02f000)
261d2760	106	#endif
03314f0e	107	#endif /* !CONFIG_GICV3 */
12916829	108
12916829	109	/* Size of malloc() pool */
5bcae13e	110	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
12916829	111
b31f9d7a LW	112	/* Ethernet Configuration */
	113	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	114	/* The real hardware Versatile express uses SMSC9118 */
	115	#define CONFIG_SMC911X 1
	116	#define CONFIG_SMC911X_32_BIT 1
	117	#define CONFIG_SMC911X_BASE (0x018000000)
	118	#else
	119	/* The Vexpress64 simulators use SMSC91C111 */
3865ceb7 BS	120	#define CONFIG_SMC91111 1
3865ceb7 BS	121	#define CONFIG_SMC91111_BASE (0x01A000000)
b31f9d7a	122	#endif
12916829 DF	123
12916829 DF	124	/* PL011 Serial Configuration */
d280ea00	125	#define CONFIG_BAUDRATE 115200
d8bafe13	126	#define CONFIG_CONS_INDEX 0
d280ea00	127	#define CONFIG_PL01X_SERIAL
12916829	128	#define CONFIG_PL011_SERIAL
ffc10373 LW	129	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	130	#define CONFIG_PL011_CLOCK 7273800
	131	#else
12916829	132	#define CONFIG_PL011_CLOCK 24000000
ffc10373	133	#endif
12916829 DF	134
	135	/* Command line configuration */
	136	#define CONFIG_MENU
	137	/#define CONFIG_MENU_SHOW/
	138	#define CONFIG_CMD_CACHE
67172528 TR	139	#define CONFIG_CMD_BOOTI
67172528 TR	140	#define CONFIG_CMD_UNZIP
12916829 DF	141	#define CONFIG_CMD_DHCP
	142	#define CONFIG_CMD_PXE
	143	#define CONFIG_CMD_ENV
12916829	144	#define CONFIG_CMD_MII
12916829	145	#define CONFIG_CMD_PING
12916829 DF	146	#define CONFIG_CMD_FAT
	147	#define CONFIG_DOS_PARTITION
	148
	149	/* BOOTP options */
	150	#define CONFIG_BOOTP_BOOTFILESIZE
	151	#define CONFIG_BOOTP_BOOTPATH
	152	#define CONFIG_BOOTP_GATEWAY
	153	#define CONFIG_BOOTP_HOSTNAME
	154	#define CONFIG_BOOTP_PXE
	155	#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
	156
	157	/* Miscellaneous configurable options */
	158	#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
	159
	160	/* Physical Memory Map */
12916829	161	#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
30355708 LW	162	/* Top 16MB reserved for secure world use */
	163	#define DRAM_SEC_SIZE 0x01000000
	164	#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
	165	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	166
2c2b2183 RH	167	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	168	#define CONFIG_NR_DRAM_BANKS 2
	169	#define PHYS_SDRAM_2 (0x880000000)
	170	#define PHYS_SDRAM_2_SIZE 0x180000000
	171	#else
	172	#define CONFIG_NR_DRAM_BANKS 1
	173	#endif
	174
30355708 LW	175	/* Enable memtest */
	176	#define CONFIG_CMD_MEMTEST
	177	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
	178	#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
12916829 DF	179
12916829 DF	180	/* Initial environment variables */
10d1491b LW	181	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	182	/*
	183	* Defines where the kernel and FDT exist in NOR flash and where it will
	184	* be copied into DRAM
	185	*/
	186	#define CONFIG_EXTRA_ENV_SETTINGS \
ecbed5d6 RH	187	"kernel_name=norkern\0" \
ecbed5d6 RH	188	"kernel_alt_name=Image\0" \
7babe482	189	"kernel_addr=0x80080000\0" \
4a6bdb59 RH	190	"initrd_name=ramdisk.img\0" \
4a6bdb59 RH	191	"initrd_addr=0x84000000\0" \
ecbed5d6 RH	192	"fdt_name=board.dtb\0" \
ecbed5d6 RH	193	"fdt_alt_name=juno\0" \
10d1491b LW	194	"fdt_addr=0x83000000\0" \
	195	"fdt_high=0xffffffffffffffff\0" \
	196	"initrd_high=0xffffffffffffffff\0" \
	197
	198	/* Assume we boot with root on the first partition of a USB stick */
	199	#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " \
492f24e8	200	"root=/dev/sda2 rw " \
33665f7c	201	"rootwait "\
c0ae9703 RH	202	"earlyprintk=pl011,0x7ff80000 debug "\
c0ae9703 RH	203	"user_debug=31 "\
74e264b4	204	"androidboot.hardware=juno "\
10d1491b LW	205	"loglevel=9"
	206
	207	/* Copy the kernel and FDT to DRAM memory and boot */
	208	#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr} ; " \
ecbed5d6 RH	209	"if test $? -eq 1; then "\
	210	" echo Loading ${kernel_alt_name} instead of "\
	211	"${kernel_name}; "\
	212	" afs load ${kernel_alt_name} ${kernel_addr};"\
	213	"fi ; "\
10d1491b	214	"afs load ${fdt_name} ${fdt_addr} ; " \
ecbed5d6 RH	215	"if test $? -eq 1; then "\
	216	" echo Loading ${fdt_alt_name} instead of "\
	217	"${fdt_name}; "\
	218	" afs load ${fdt_alt_name} ${fdt_addr}; "\
	219	"fi ; "\
10d1491b	220	"fdt addr ${fdt_addr}; fdt resize; " \
4a6bdb59 RH	221	"if afs load ${initrd_name} ${initrd_addr} ; "\
	222	"then "\
	223	" setenv initrd_param ${initrd_addr}; "\
	224	" else setenv initrd_param -; "\
	225	"fi ; " \
	226	"booti ${kernel_addr} ${initrd_param} ${fdt_addr}"
10d1491b LW	227
	228	#define CONFIG_BOOTDELAY 1
	229
	230	#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
261d2760	231	#define CONFIG_EXTRA_ENV_SETTINGS \
1fd0f92e	232	"kernel_name=Image\0" \
7babe482	233	"kernel_addr=0x80080000\0" \
261d2760	234	"initrd_name=ramdisk.img\0" \
49995ffe LW	235	"initrd_addr=0x88000000\0" \
	236	"fdt_name=devtree.dtb\0" \
	237	"fdt_addr=0x83000000\0" \
261d2760 DR	238	"fdt_high=0xffffffffffffffff\0" \
	239	"initrd_high=0xffffffffffffffff\0"
	240
	241	#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
	242	"0x1c090000 debug user_debug=31 "\
	243	"loglevel=9"
	244
49995ffe	245	#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \
1fd0f92e	246	"smhload ${fdt_name} ${fdt_addr}; " \
c0ae9703 RH	247	"smhload ${initrd_name} ${initrd_addr} "\
c0ae9703 RH	248	"initrd_end; " \
1fd0f92e LW	249	"fdt addr ${fdt_addr}; fdt resize; " \
	250	"fdt chosen ${initrd_addr} ${initrd_end}; " \
	251	"booti $kernel_addr - $fdt_addr"
261d2760 DR	252
	253	#define CONFIG_BOOTDELAY 1
	254
fc04b923 RH	255	#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
	256	#define CONFIG_EXTRA_ENV_SETTINGS \
	257	"kernel_addr=0x80080000\0" \
	258	"initrd_addr=0x84000000\0" \
	259	"fdt_addr=0x83000000\0" \
	260	"fdt_high=0xffffffffffffffff\0" \
	261	"initrd_high=0xffffffffffffffff\0"
	262
	263	#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
	264	"0x1c090000 debug user_debug=31 "\
	265	"androidboot.hardware=fvpbase "\
	266	"root=/dev/vda2 rw "\
	267	"rootwait "\
	268	"loglevel=9"
	269
	270	#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr"
	271
	272	#define CONFIG_BOOTDELAY 1
	273
261d2760	274	#endif
12916829	275
12916829 DF	276	/* Monitor Command Prompt */
12916829 DF	277	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
12916829 DF	278	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	279	sizeof(CONFIG_SYS_PROMPT) + 16)
	280	#define CONFIG_SYS_HUSH_PARSER
12916829 DF	281	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
12916829 DF	282	#define CONFIG_SYS_LONGHELP
5bcae13e	283	#define CONFIG_CMDLINE_EDITING
12916829 DF	284	#define CONFIG_SYS_MAXARGS 64 /* max command args */
12916829 DF	285
f3c71c93 RH	286	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	287	#define CONFIG_SYS_FLASH_BASE 0x08000000
	288	/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
	289	#define CONFIG_SYS_MAX_FLASH_SECT 259
	290	/* Store environment at top of flash in the same location as blank.img */
	291	/* in the Juno firmware. */
	292	#define CONFIG_ENV_ADDR 0x0BFC0000
	293	#define CONFIG_ENV_SECT_SIZE 0x00010000
14f264e6	294	#else
f3c71c93 RH	295	#define CONFIG_SYS_FLASH_BASE 0x0C000000
	296	/* 256 x 256KiB sectors */
	297	#define CONFIG_SYS_MAX_FLASH_SECT 256
	298	/* Store environment at top of flash */
	299	#define CONFIG_ENV_ADDR 0x0FFC0000
	300	#define CONFIG_ENV_SECT_SIZE 0x00040000
	301	#endif
	302
10d1491b	303	#define CONFIG_CMD_ARMFLASH
14f264e6 LW	304	#define CONFIG_SYS_FLASH_CFI 1
14f264e6 LW	305	#define CONFIG_FLASH_CFI_DRIVER 1
f19f389f	306	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
f3c71c93	307	#define CONFIG_SYS_MAX_FLASH_BANKS 1
14f264e6	308
14f264e6 LW	309	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
	310	#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
	311	#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
f3c71c93 RH	312	#define FLASH_MAX_SECTOR_SIZE 0x00040000
	313	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	314	#define CONFIG_ENV_IS_IN_FLASH 1
14f264e6	315
14f264e6	316
12916829	317	#endif /* __VEXPRESS_AEMV8A_H */