[people/ms/u-boot.git] / include / configs / vexpress_common.h

/*
 * (C) Copyright 2011 ARM Limited
 * (C) Copyright 2010 Linaro
 * Matt Waddel, <matt.waddel@linaro.org>
 *
 * Configuration for Versatile Express. Parts were derived from other ARM
 *   configurations.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __VEXPRESS_COMMON_H
#define __VEXPRESS_COMMON_H

/*
 * Definitions copied from linux kernel:
 * arch/arm/mach-vexpress/include/mach/motherboard.h
 */
#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
/* CS register bases for the original memory map. */
#define V2M_PA_CS0		0x40000000
#define V2M_PA_CS1		0x44000000
#define V2M_PA_CS2		0x48000000
#define V2M_PA_CS3		0x4c000000
#define V2M_PA_CS7		0x10000000

#define V2M_PERIPH_OFFSET(x)	(x << 12)
#define V2M_SYSREGS		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
#define V2M_SYSCTL		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))

#define V2M_BASE		0x60000000
#define CONFIG_SYS_TEXT_BASE	0x60800000
#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
/* CS register bases for the extended memory map. */
#define V2M_PA_CS0		0x08000000
#define V2M_PA_CS1		0x0c000000
#define V2M_PA_CS2		0x14000000
#define V2M_PA_CS3		0x18000000
#define V2M_PA_CS7		0x1c000000

#define V2M_PERIPH_OFFSET(x)	(x << 16)
#define V2M_SYSREGS		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
#define V2M_SYSCTL		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))

#define V2M_BASE		0x80000000
#define CONFIG_SYS_TEXT_BASE	0x80800000
#endif

/*
 * Physical addresses, offset from V2M_PA_CS0-3
 */
#define V2M_NOR0		(V2M_PA_CS0)
#define V2M_NOR1		(V2M_PA_CS1)
#define V2M_SRAM		(V2M_PA_CS2)
#define V2M_VIDEO_SRAM		(V2M_PA_CS3 + 0x00000000)
#define V2M_LAN9118		(V2M_PA_CS3 + 0x02000000)
#define V2M_ISP1761		(V2M_PA_CS3 + 0x03000000)

/* Common peripherals relative to CS7. */
#define V2M_AACI		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
#define V2M_MMCI		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
#define V2M_KMI0		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
#define V2M_KMI1		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))

#define V2M_UART0		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
#define V2M_UART1		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
#define V2M_UART2		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
#define V2M_UART3		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))

#define V2M_WDT			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))

#define V2M_TIMER01		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
#define V2M_TIMER23		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))

#define V2M_SERIAL_BUS_DVI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
#define V2M_RTC			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))

#define V2M_CF			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))

#define V2M_CLCD		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
#define V2M_SIZE_CS7		V2M_PERIPH_OFFSET(32)

/* System register offsets. */
#define V2M_SYS_CFGDATA		(V2M_SYSREGS + 0x0a0)
#define V2M_SYS_CFGCTRL		(V2M_SYSREGS + 0x0a4)
#define V2M_SYS_CFGSTAT		(V2M_SYSREGS + 0x0a8)

/*
 * Configuration
 */
#define SYS_CFG_START		(1 << 31)
#define SYS_CFG_WRITE		(1 << 30)
#define SYS_CFG_OSC		(1 << 20)
#define SYS_CFG_VOLT		(2 << 20)
#define SYS_CFG_AMP		(3 << 20)
#define SYS_CFG_TEMP		(4 << 20)
#define SYS_CFG_RESET		(5 << 20)
#define SYS_CFG_SCC		(6 << 20)
#define SYS_CFG_MUXFPGA		(7 << 20)
#define SYS_CFG_SHUTDOWN	(8 << 20)
#define SYS_CFG_REBOOT		(9 << 20)
#define SYS_CFG_DVIMODE		(11 << 20)
#define SYS_CFG_POWER		(12 << 20)
#define SYS_CFG_SITE_MB		(0 << 16)
#define SYS_CFG_SITE_DB1	(1 << 16)
#define SYS_CFG_SITE_DB2	(2 << 16)
#define SYS_CFG_STACK(n)	((n) << 12)

#define SYS_CFG_ERR		(1 << 1)
#define SYS_CFG_COMPLETE	(1 << 0)

/* Board info register */
#define SYS_ID				V2M_SYSREGS
#define CONFIG_REVISION_TAG		1

#define CONFIG_SYS_MEMTEST_START	V2M_BASE
#define CONFIG_SYS_MEMTEST_END		0x20000000

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_SYS_L2CACHE_OFF		1
#define CONFIG_INITRD_TAG		1

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)

#define SCTL_BASE			V2M_SYSCTL
#define VEXPRESS_FLASHPROG_FLVPPEN	(1 << 0)

#define CONFIG_SYS_TIMER_RATE		1000000
#define CONFIG_SYS_TIMER_COUNTER	(V2M_TIMER01 + 0x4)
#define CONFIG_SYS_TIMER_COUNTS_DOWN

/* SMSC9115 Ethernet from SMSC9118 family */
#define CONFIG_SMC911X			1
#define CONFIG_SMC911X_32_BIT		1
#define CONFIG_SMC911X_BASE		V2M_LAN9118

/* PL011 Serial Configuration */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK		24000000
#define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
					 (void *)CONFIG_SYS_SERIAL1}
#define CONFIG_CONS_INDEX		0

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0		V2M_UART0
#define CONFIG_SYS_SERIAL1		V2M_UART1

#define CONFIG_ARM_PL180_MMCI
#define CONFIG_ARM_PL180_MMCI_BASE	V2M_MMCI
#define CONFIG_SYS_MMC_MAX_BLK_COUNT	127
#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x8000)
#define LINUX_BOOT_PARAM_ADDR		(V2M_BASE + 0x2000)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
#define PHYS_SDRAM_2			(((unsigned int)V2M_BASE) + \
					((unsigned int)0x20000000))
#define PHYS_SDRAM_1_SIZE		0x20000000	/* 512 MB */
#define PHYS_SDRAM_2_SIZE		0x20000000	/* 512 MB */

/* additions for new relocation code */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_SIZE		0x1000
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET

#include <config_distro_defaults.h>

/* Basic environment settings */
#define CONFIG_BOOTCOMMAND \
	"run distro_bootcmd; " \
	"run bootflash; "

#define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 0) \
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
#define CONFIG_PLATFORM_ENV_SETTINGS \
		"loadaddr=0x80008000\0" \
		"ramdisk_addr_r=0x61000000\0" \
		"kernel_addr=0x44100000\0" \
		"ramdisk_addr=0x44800000\0" \
		"maxramdisk=0x1800000\0" \
		"pxefile_addr_r=0x88000000\0" \
		"scriptaddr=0x88000000\0" \
		"kernel_addr_r=0x80008000\0"
#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
#define CONFIG_PLATFORM_ENV_SETTINGS \
		"loadaddr=0xa0008000\0" \
		"ramdisk_addr_r=0x81000000\0" \
		"kernel_addr=0x0c100000\0" \
		"ramdisk_addr=0x0c800000\0" \
		"maxramdisk=0x1800000\0" \
		"pxefile_addr_r=0xa8000000\0" \
		"scriptaddr=0xa8000000\0" \
		"kernel_addr_r=0xa0008000\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
		CONFIG_PLATFORM_ENV_SETTINGS \
                BOOTENV \
		"console=ttyAMA0,38400n8\0" \
		"dram=1024M\0" \
		"root=/dev/sda1 rw\0" \
		"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
			"24M@0x2000000(initrd)\0" \
		"flashargs=setenv bootargs root=${root} console=${console} " \
			"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
			"devtmpfs.mount=0  vmalloc=256M\0" \
		"bootflash=run flashargs; " \
			"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
			"bootm ${kernel_addr} ${ramdisk_addr_r}\0"

/* FLASH and environment organization */
#define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_SYS_FLASH_SIZE		0x04000000
#define CONFIG_SYS_MAX_FLASH_BANKS	2
#define CONFIG_SYS_FLASH_BASE0		V2M_NOR0
#define CONFIG_SYS_FLASH_BASE1		V2M_NOR1
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE0

/* Timeout values in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */

/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
#define CONFIG_SYS_MAX_FLASH_SECT	259		/* Max sectors */
#define FLASH_MAX_SECTOR_SIZE		0x00040000	/* 256 KB sectors */

/* Room required on the stack for the environment data */
#define CONFIG_ENV_SIZE			FLASH_MAX_SECTOR_SIZE

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */

/*
 * Amount of flash used for environment:
 * We don't know which end has the small erase blocks so we use the penultimate
 * sector location for the environment
 */
#define CONFIG_ENV_SECT_SIZE		FLASH_MAX_SECTOR_SIZE
#define CONFIG_ENV_OVERWRITE		1

/* Store environment at top of flash */
#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - \
					(2 * CONFIG_ENV_SECT_SIZE))
#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE1 + \
					 CONFIG_ENV_OFFSET)
#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE0, \
					  CONFIG_SYS_FLASH_BASE1 }

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)

#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MAXARGS		16	/* max command args */

#endif /* VEXPRESS_COMMON_H */
Commit	Line	Data
b80e41ac	1	/*
cd4f46e1	2	* (C) Copyright 2011 ARM Limited
b80e41ac MW	3	* (C) Copyright 2010 Linaro
	4	* Matt Waddel, <matt.waddel@linaro.org>
	5	*
	6	* Configuration for Versatile Express. Parts were derived from other ARM
	7	* configurations.
	8	*
3765b3e7	9	* SPDX-License-Identifier: GPL-2.0+
b80e41ac MW	10	*/
b80e41ac MW	11
cd4f46e1 RH	12	#ifndef __VEXPRESS_COMMON_H
	13	#define __VEXPRESS_COMMON_H
	14
	15	/*
	16	* Definitions copied from linux kernel:
	17	* arch/arm/mach-vexpress/include/mach/motherboard.h
	18	*/
	19	#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
	20	/* CS register bases for the original memory map. */
	21	#define V2M_PA_CS0 0x40000000
	22	#define V2M_PA_CS1 0x44000000
	23	#define V2M_PA_CS2 0x48000000
	24	#define V2M_PA_CS3 0x4c000000
	25	#define V2M_PA_CS7 0x10000000
	26
	27	#define V2M_PERIPH_OFFSET(x) (x << 12)
	28	#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
	29	#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
	30	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
	31
	32	#define V2M_BASE 0x60000000
	33	#define CONFIG_SYS_TEXT_BASE 0x60800000
	34	#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
	35	/* CS register bases for the extended memory map. */
	36	#define V2M_PA_CS0 0x08000000
	37	#define V2M_PA_CS1 0x0c000000
	38	#define V2M_PA_CS2 0x14000000
	39	#define V2M_PA_CS3 0x18000000
	40	#define V2M_PA_CS7 0x1c000000
	41
	42	#define V2M_PERIPH_OFFSET(x) (x << 16)
	43	#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
	44	#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
	45	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
	46
	47	#define V2M_BASE 0x80000000
	48	#define CONFIG_SYS_TEXT_BASE 0x80800000
	49	#endif
	50
	51	/*
	52	* Physical addresses, offset from V2M_PA_CS0-3
	53	*/
	54	#define V2M_NOR0 (V2M_PA_CS0)
	55	#define V2M_NOR1 (V2M_PA_CS1)
	56	#define V2M_SRAM (V2M_PA_CS2)
	57	#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
	58	#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000)
	59	#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
	60
	61	/* Common peripherals relative to CS7. */
	62	#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
	63	#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
	64	#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
	65	#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
	66
	67	#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
	68	#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
	69	#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
	70	#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
	71
	72	#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
	73
	74	#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
	75	#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
76
77	#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
78	#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
79
80	#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
81
82	#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
83	#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32)
84
85	/* System register offsets. */
86	#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
87	#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
88	#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
89
90	/*
91	* Configuration
92	*/
93	#define SYS_CFG_START (1 << 31)
94	#define SYS_CFG_WRITE (1 << 30)
95	#define SYS_CFG_OSC (1 << 20)
96	#define SYS_CFG_VOLT (2 << 20)
97	#define SYS_CFG_AMP (3 << 20)
98	#define SYS_CFG_TEMP (4 << 20)
99	#define SYS_CFG_RESET (5 << 20)
100	#define SYS_CFG_SCC (6 << 20)
101	#define SYS_CFG_MUXFPGA (7 << 20)
102	#define SYS_CFG_SHUTDOWN (8 << 20)
103	#define SYS_CFG_REBOOT (9 << 20)
104	#define SYS_CFG_DVIMODE (11 << 20)
105	#define SYS_CFG_POWER (12 << 20)
106	#define SYS_CFG_SITE_MB (0 << 16)
107	#define SYS_CFG_SITE_DB1 (1 << 16)
108	#define SYS_CFG_SITE_DB2 (2 << 16)
109	#define SYS_CFG_STACK(n) ((n) << 12)
110
111	#define SYS_CFG_ERR (1 << 1)
112	#define SYS_CFG_COMPLETE (1 << 0)
b80e41ac MW	113
b80e41ac MW	114	/* Board info register */
cd4f46e1	115	#define SYS_ID V2M_SYSREGS
b80e41ac MW	116	#define CONFIG_REVISION_TAG 1
b80e41ac MW	117
cd4f46e1	118	#define CONFIG_SYS_MEMTEST_START V2M_BASE
b80e41ac	119	#define CONFIG_SYS_MEMTEST_END 0x20000000
b80e41ac MW	120
	121	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	122	#define CONFIG_SETUP_MEMORY_TAGS 1
e47f2db5	123	#define CONFIG_SYS_L2CACHE_OFF 1
b80e41ac	124	#define CONFIG_INITRD_TAG 1
2fa8ca98	125
b80e41ac MW	126	/* Size of malloc() pool */
b80e41ac MW	127	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
b80e41ac	128
cd4f46e1	129	#define SCTL_BASE V2M_SYSCTL
b80e41ac MW	130	#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
b80e41ac MW	131
b3a7f22b	132	#define CONFIG_SYS_TIMER_RATE 1000000
cb7ee1b9	133	#define CONFIG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4)
b3a7f22b RH	134	#define CONFIG_SYS_TIMER_COUNTS_DOWN
b3a7f22b RH	135
b80e41ac	136	/* SMSC9115 Ethernet from SMSC9118 family */
b80e41ac MW	137	#define CONFIG_SMC911X 1
b80e41ac MW	138	#define CONFIG_SMC911X_32_BIT 1
cd4f46e1	139	#define CONFIG_SMC911X_BASE V2M_LAN9118
b80e41ac MW	140
	141	/* PL011 Serial Configuration */
	142	#define CONFIG_PL011_SERIAL
	143	#define CONFIG_PL011_CLOCK 24000000
	144	#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
	145	(void *)CONFIG_SYS_SERIAL1}
	146	#define CONFIG_CONS_INDEX 0
	147
cd4f46e1 RH	148	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	149	#define CONFIG_SYS_SERIAL0 V2M_UART0
	150	#define CONFIG_SYS_SERIAL1 V2M_UART1
b80e41ac	151
f0c64526	152	#define CONFIG_ARM_PL180_MMCI
cd4f46e1	153	#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI
f0c64526 MW	154	#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
f0c64526 MW	155	#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
b80e41ac MW	156
	157	/* BOOTP options */
	158	#define CONFIG_BOOTP_BOOTFILESIZE
	159	#define CONFIG_BOOTP_BOOTPATH
	160	#define CONFIG_BOOTP_GATEWAY
	161	#define CONFIG_BOOTP_HOSTNAME
	162
	163	/* Miscellaneous configurable options */
cd4f46e1 RH	164	#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
cd4f46e1 RH	165	#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
b80e41ac	166
b80e41ac MW	167	/* Physical Memory Map */
b80e41ac MW	168	#define CONFIG_NR_DRAM_BANKS 2
cd4f46e1 RH	169	#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
	170	#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \
	171	((unsigned int)0x20000000))
b80e41ac MW	172	#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
	173	#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */
	174
	175	/* additions for new relocation code */
	176	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
553f0982	177	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
b80e41ac	178	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
553f0982	179	CONFIG_SYS_INIT_RAM_SIZE - \
25ddd1fb	180	GENERATED_GBL_DATA_SIZE)
b80e41ac	181	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
acb5ff02 DG	182
acb5ff02 DG	183	#include <config_distro_defaults.h>
b80e41ac MW	184
b80e41ac MW	185	/* Basic environment settings */
acb5ff02 DG	186	#define CONFIG_BOOTCOMMAND \
	187	"run distro_bootcmd; " \
	188	"run bootflash; "
	189
	190	#define BOOT_TARGET_DEVICES(func) \
	191	func(MMC, mmc, 1) \
	192	func(MMC, mmc, 0) \
	193	func(PXE, pxe, na) \
	194	func(DHCP, dhcp, na)
	195	#include <config_distro_bootcmd.h>
	196
cd4f46e1 RH	197	#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
cd4f46e1 RH	198	#define CONFIG_PLATFORM_ENV_SETTINGS \
b80e41ac	199	"loadaddr=0x80008000\0" \
75e7f3f3 JH	200	"ramdisk_addr_r=0x61000000\0" \
	201	"kernel_addr=0x44100000\0" \
	202	"ramdisk_addr=0x44800000\0" \
	203	"maxramdisk=0x1800000\0" \
e21669fd	204	"pxefile_addr_r=0x88000000\0" \
acb5ff02	205	"scriptaddr=0x88000000\0" \
cd4f46e1 RH	206	"kernel_addr_r=0x80008000\0"
	207	#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
	208	#define CONFIG_PLATFORM_ENV_SETTINGS \
	209	"loadaddr=0xa0008000\0" \
	210	"ramdisk_addr_r=0x81000000\0" \
	211	"kernel_addr=0x0c100000\0" \
	212	"ramdisk_addr=0x0c800000\0" \
	213	"maxramdisk=0x1800000\0" \
	214	"pxefile_addr_r=0xa8000000\0" \
acb5ff02	215	"scriptaddr=0xa8000000\0" \
cd4f46e1 RH	216	"kernel_addr_r=0xa0008000\0"
	217	#endif
	218	#define CONFIG_EXTRA_ENV_SETTINGS \
	219	CONFIG_PLATFORM_ENV_SETTINGS \
acb5ff02	220	BOOTENV \
b80e41ac MW	221	"console=ttyAMA0,38400n8\0" \
	222	"dram=1024M\0" \
	223	"root=/dev/sda1 rw\0" \
	224	"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
	225	"24M@0x2000000(initrd)\0" \
	226	"flashargs=setenv bootargs root=${root} console=${console} " \
	227	"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
	228	"devtmpfs.mount=0 vmalloc=256M\0" \
	229	"bootflash=run flashargs; " \
75e7f3f3 JH	230	"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
75e7f3f3 JH	231	"bootm ${kernel_addr} ${ramdisk_addr_r}\0"
b80e41ac MW	232
	233	/* FLASH and environment organization */
	234	#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
	235	#define CONFIG_SYS_FLASH_CFI 1
	236	#define CONFIG_FLASH_CFI_DRIVER 1
	237	#define CONFIG_SYS_FLASH_SIZE 0x04000000
	238	#define CONFIG_SYS_MAX_FLASH_BANKS 2
cd4f46e1 RH	239	#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0
cd4f46e1 RH	240	#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1
b80e41ac MW	241	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
	242
	243	/* Timeout values in ticks */
	244	#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
	245	#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
	246
	247	/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
	248	#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
	249	#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
	250
	251	/* Room required on the stack for the environment data */
	252	#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
	253
de1f9ac8 JT	254	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
de1f9ac8 JT	255
b80e41ac MW	256	/*
	257	* Amount of flash used for environment:
	258	* We don't know which end has the small erase blocks so we use the penultimate
	259	* sector location for the environment
	260	*/
	261	#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
	262	#define CONFIG_ENV_OVERWRITE 1
	263
	264	/* Store environment at top of flash */
	265	#define CONFIG_ENV_IS_IN_FLASH 1
	266	#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
	267	(2 * CONFIG_ENV_SECT_SIZE))
	268	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
	269	CONFIG_ENV_OFFSET)
	270	#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
	271	#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
	272	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
	273	CONFIG_SYS_FLASH_BASE1 }
	274
	275	/* Monitor Command Prompt */
	276	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
b80e41ac MW	277	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
b80e41ac MW	278	sizeof(CONFIG_SYS_PROMPT) + 16)
d21c3afa	279
b80e41ac	280	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
b80e41ac	281	#define CONFIG_SYS_LONGHELP
b80e41ac MW	282	#define CONFIG_SYS_MAXARGS 16 /* max command args */
b80e41ac MW	283
cd4f46e1	284	#endif /* VEXPRESS_COMMON_H */