[people/ms/u-boot.git] / include / configs / vf610twr.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale Vybrid vf610twr board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

#define CONFIG_VF610

#define CONFIG_SYS_FSL_CLK

#define CONFIG_MACH_TYPE		4146

#define CONFIG_SKIP_LOWLEVEL_INIT

/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_SYS_NAND_ONFI_DETECTION

#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* UBI */
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define MTDIDS_DEFAULT			"nand0=fsl_nfc"
#define MTDPARTS_DEFAULT		"mtdparts=fsl_nfc:"		\
					"128k(vf-bcb)ro,"		\
					"1408k(u-boot)ro,"		\
					"512k(u-boot-env),"		\
					"4m(kernel),"			\
					"512k(fdt),"		\
					"-(rootfs)"
#endif

#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

/* QSPI Configs*/

#ifdef CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2
#define CONFIG_SYS_FSL_QSPI_LE
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_SPD_BUS_NUM		0


#define CONFIG_SYS_LOAD_ADDR		0x82000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

/*
 * We do have 128MB of memory on the Vybrid Tower board. Leave the last
 * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
 * DDR3. Hence, limit the memory range for image processing to 112MB
 * using bootm_size. All of the following must be within this range.
 * We have the default load at 32MB into DDR (for the kernel), FDT at
 * 64MB and the ramdisk 512KB above that (allowing for hopefully never
 * seen large trees). This allows a reasonable split between ramdisk
 * and kernel size, where the ram disk can be a bit larger.
 */
#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=0x07000000\0" \
	"loadaddr=0x82000000\0" \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr=0x84000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"rdaddr=0x84080000\0" \
	"ramdisk_addr_r=0x84080000\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	MEM_LAYOUT_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttyLP1\0" \
	"fdt_file=vf610-twr.dtb\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_SECT_SIZE		(64 * 2048)
#define CONFIG_ENV_RANGE		(512 * 1024)
#define CONFIG_ENV_OFFSET		0x180000
#endif

#endif
Commit	Line	Data
8c653124 AW	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale Vybrid vf610twr board.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
8c653124 AW	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
8c653124 AW	13
	14	#define CONFIG_VF610
	15
18fb0e3c	16	#define CONFIG_SYS_FSL_CLK
8c653124 AW	17
	18	#define CONFIG_MACH_TYPE 4146
	19
	20	#define CONFIG_SKIP_LOWLEVEL_INIT
	21
	22	/* Enable passing of ATAGs */
	23	#define CONFIG_CMDLINE_TAG
	24
	25	#define CONFIG_CMD_FUSE
	26	#ifdef CONFIG_CMD_FUSE
	27	#define CONFIG_MXC_OCOTP
	28	#endif
	29
	30	/* Size of malloc() pool */
	31	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	32
8c653124 AW	33	/* Allow to overwrite serial and ethaddr */
8c653124 AW	34	#define CONFIG_ENV_OVERWRITE
8c653124 AW	35	#define CONFIG_BAUDRATE 115200
8c653124 AW	36
d6d07a9b SA	37	/* NAND support */
	38	#define CONFIG_CMD_NAND
	39	#define CONFIG_CMD_NAND_TRIMFFS
8fca2d8c	40	#define CONFIG_SYS_NAND_ONFI_DETECTION
d6d07a9b SA	41
d6d07a9b SA	42	#ifdef CONFIG_CMD_NAND
d6d07a9b SA	43	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	44	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	45
	46	/* UBI */
d6d07a9b	47	#define CONFIG_CMD_UBIFS
d6d07a9b SA	48	#define CONFIG_RBTREE
d6d07a9b SA	49	#define CONFIG_LZO
d6d07a9b SA	50
	51	/* Dynamic MTD partition support */
	52	#define CONFIG_CMD_MTDPARTS
	53	#define CONFIG_MTD_PARTITIONS
	54	#define CONFIG_MTD_DEVICE
	55	#define MTDIDS_DEFAULT "nand0=fsl_nfc"
	56	#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
	57	"128k(vf-bcb)ro," \
	58	"1408k(u-boot)ro," \
	59	"512k(u-boot-env)," \
	60	"4m(kernel)," \
	61	"512k(fdt)," \
	62	"-(rootfs)"
	63	#endif
	64
8c653124 AW	65	#define CONFIG_FSL_ESDHC
	66	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	67	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	68
8c653124	69	#define CONFIG_GENERIC_MMC
8c653124 AW	70	#define CONFIG_DOS_PARTITION
8c653124 AW	71
8c653124 AW	72	#define CONFIG_FEC_MXC
	73	#define CONFIG_MII
	74	#define IMX_FEC_BASE ENET_BASE_ADDR
	75	#define CONFIG_FEC_XCV_TYPE RMII
	76	#define CONFIG_FEC_MXC_PHYADDR 0
	77	#define CONFIG_PHYLIB
	78	#define CONFIG_PHY_MICREL
	79
cb6d04d6	80	/* QSPI Configs*/
cb6d04d6 CF	81
cb6d04d6 CF	82	#ifdef CONFIG_FSL_QSPI
cb6d04d6 CF	83	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	84	#define FSL_QSPI_FLASH_NUM 2
	85	#define CONFIG_SYS_FSL_QSPI_LE
	86	#endif
	87
1221b3d7	88	/* I2C Configs */
b089d039	89	#define CONFIG_SYS_I2C
b089d039	90	#define CONFIG_SYS_I2C_MXC
03544c66 AA	91	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	92	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
b089d039	93	#define CONFIG_SYS_SPD_BUS_NUM 0
1221b3d7	94
8c653124	95
cf04ad32	96	#define CONFIG_SYS_LOAD_ADDR 0x82000000
b188067f SA	97
	98	/* We boot from the gfxRAM area of the OCRAM. */
	99	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	100	#define CONFIG_BOARD_SIZE_LIMIT 524288
8c653124	101
cf04ad32 SA	102	/*
	103	* We do have 128MB of memory on the Vybrid Tower board. Leave the last
	104	* 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
	105	* DDR3. Hence, limit the memory range for image processing to 112MB
	106	* using bootm_size. All of the following must be within this range.
	107	* We have the default load at 32MB into DDR (for the kernel), FDT at
	108	* 64MB and the ramdisk 512KB above that (allowing for hopefully never
	109	* seen large trees). This allows a reasonable split between ramdisk
	110	* and kernel size, where the ram disk can be a bit larger.
	111	*/
	112	#define MEM_LAYOUT_ENV_SETTINGS \
	113	"bootm_size=0x07000000\0" \
	114	"loadaddr=0x82000000\0" \
	115	"kernel_addr_r=0x82000000\0" \
	116	"fdt_addr=0x84000000\0" \
	117	"fdt_addr_r=0x84000000\0" \
	118	"rdaddr=0x84080000\0" \
	119	"ramdisk_addr_r=0x84080000\0"
	120
ca21f61e	121	#define CONFIG_EXTRA_ENV_SETTINGS \
cf04ad32	122	MEM_LAYOUT_ENV_SETTINGS \
ca21f61e	123	"script=boot.scr\0" \
c0a5b081	124	"image=zImage\0" \
ca21f61e	125	"console=ttyLP1\0" \
ca21f61e	126	"fdt_file=vf610-twr.dtb\0" \
ca21f61e OS	127	"boot_fdt=try\0" \
	128	"ip_dyn=yes\0" \
	129	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	130	"mmcpart=1\0" \
	131	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	132	"update_sd_firmware_filename=u-boot.imx\0" \
	133	"update_sd_firmware=" \
	134	"if test ${ip_dyn} = yes; then " \
	135	"setenv get_cmd dhcp; " \
	136	"else " \
	137	"setenv get_cmd tftp; " \
	138	"fi; " \
	139	"if mmc dev ${mmcdev}; then " \
	140	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	141	"setexpr fw_sz ${filesize} / 0x200; " \
	142	"setexpr fw_sz ${fw_sz} + 1; " \
	143	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	144	"fi; " \
	145	"fi\0" \
	146	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	147	"root=${mmcroot}\0" \
	148	"loadbootscript=" \
	149	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	150	"bootscript=echo Running bootscript from mmc ...; " \
	151	"source\0" \
c0a5b081	152	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
ca21f61e OS	153	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	154	"mmcboot=echo Booting from mmc ...; " \
	155	"run mmcargs; " \
	156	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	157	"if run loadfdt; then " \
c0a5b081	158	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	159	"else " \
ca21f61e OS	160	"if test ${boot_fdt} = try; then " \
c0a5b081	161	"bootz; " \
ca21f61e OS	162	"else " \
	163	"echo WARN: Cannot load the DT; " \
	164	"fi; " \
	165	"fi; " \
	166	"else " \
c0a5b081	167	"bootz; " \
ca21f61e OS	168	"fi;\0" \
	169	"netargs=setenv bootargs console=${console},${baudrate} " \
	170	"root=/dev/nfs " \
	171	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	172	"netboot=echo Booting from net ...; " \
	173	"run netargs; " \
	174	"if test ${ip_dyn} = yes; then " \
	175	"setenv get_cmd dhcp; " \
	176	"else " \
	177	"setenv get_cmd tftp; " \
	178	"fi; " \
c0a5b081	179	"${get_cmd} ${image}; " \
ca21f61e OS	180	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
ca21f61e OS	181	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
c0a5b081	182	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	183	"else " \
ca21f61e OS	184	"if test ${boot_fdt} = try; then " \
c0a5b081	185	"bootz; " \
ca21f61e OS	186	"else " \
	187	"echo WARN: Cannot load the DT; " \
	188	"fi; " \
	189	"fi; " \
	190	"else " \
c0a5b081	191	"bootz; " \
ca21f61e OS	192	"fi;\0"
	193
	194	#define CONFIG_BOOTCOMMAND \
	195	"mmc dev ${mmcdev}; if mmc rescan; then " \
	196	"if run loadbootscript; then " \
	197	"run bootscript; " \
	198	"else " \
c0a5b081	199	"if run loadimage; then " \
ca21f61e OS	200	"run mmcboot; " \
	201	"else run netboot; " \
	202	"fi; " \
	203	"fi; " \
	204	"else run netboot; fi"
	205
8c653124 AW	206	/* Miscellaneous configurable options */
8c653124 AW	207	#define CONFIG_SYS_LONGHELP /* undef to save memory */
8c653124 AW	208	#undef CONFIG_AUTO_COMPLETE
	209	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	210	#define CONFIG_SYS_PBSIZE \
	211	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	212	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	213	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	214
8c653124 AW	215	#define CONFIG_SYS_MEMTEST_START 0x80010000
	216	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	217
8c653124 AW	218	/*
	219	* Stack sizes
	220	* The stack sizes are set up in start.S using the settings below
	221	*/
	222	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	223
	224	/* Physical memory map */
	225	#define CONFIG_NR_DRAM_BANKS 1
	226	#define PHYS_SDRAM (0x80000000)
	227	#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
	228
	229	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	230	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	231	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	232
	233	#define CONFIG_SYS_INIT_SP_OFFSET \
	234	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	235	#define CONFIG_SYS_INIT_SP_ADDR \
	236	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	237
	238	/* FLASH and environment organization */
	239	#define CONFIG_SYS_NO_FLASH
	240
d6d07a9b	241	#ifdef CONFIG_ENV_IS_IN_MMC
8c653124	242	#define CONFIG_ENV_SIZE (8 * 1024)
8c653124 AW	243
	244	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	245	#define CONFIG_SYS_MMC_ENV_DEV 0
d6d07a9b SA	246	#endif
	247
	248	#ifdef CONFIG_ENV_IS_IN_NAND
	249	#define CONFIG_ENV_SIZE (64 * 2048)
	250	#define CONFIG_ENV_SECT_SIZE (64 * 2048)
	251	#define CONFIG_ENV_RANGE (512 * 1024)
	252	#define CONFIG_ENV_OFFSET 0x180000
	253	#endif
8c653124	254
8c653124	255	#endif