[people/ms/u-boot.git] / include / configs / vf610twr.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale Vybrid vf610twr board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

#define CONFIG_SYS_FSL_CLK

#define CONFIG_MACH_TYPE		4146

#define CONFIG_SKIP_LOWLEVEL_INIT

/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG

#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION

#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* Dynamic MTD partition support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define MTDIDS_DEFAULT			"nand0=fsl_nfc"
#define MTDPARTS_DEFAULT		"mtdparts=fsl_nfc:"		\
					"128k(vf-bcb)ro,"		\
					"1408k(u-boot)ro,"		\
					"512k(u-boot-env),"		\
					"4m(kernel),"			\
					"512k(fdt),"		\
					"-(rootfs)"
#endif

#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0

/* QSPI Configs*/

#ifdef CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2
#define CONFIG_SYS_FSL_QSPI_LE
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_SPD_BUS_NUM		0


#define CONFIG_SYS_LOAD_ADDR		0x82000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

/*
 * We do have 128MB of memory on the Vybrid Tower board. Leave the last
 * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
 * DDR3. Hence, limit the memory range for image processing to 112MB
 * using bootm_size. All of the following must be within this range.
 * We have the default load at 32MB into DDR (for the kernel), FDT at
 * 64MB and the ramdisk 512KB above that (allowing for hopefully never
 * seen large trees). This allows a reasonable split between ramdisk
 * and kernel size, where the ram disk can be a bit larger.
 */
#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=0x07000000\0" \
	"loadaddr=0x82000000\0" \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr=0x84000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"rdaddr=0x84080000\0" \
	"ramdisk_addr_r=0x84080000\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	MEM_LAYOUT_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttyLP1\0" \
	"fdt_file=vf610-twr.dtb\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#undef CONFIG_AUTO_COMPLETE

#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_SECT_SIZE		(64 * 2048)
#define CONFIG_ENV_RANGE		(512 * 1024)
#define CONFIG_ENV_OFFSET		0x180000
#endif

#endif
Commit	Line	Data
8c653124 AW	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale Vybrid vf610twr board.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
8c653124 AW	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
8c653124	13
18fb0e3c	14	#define CONFIG_SYS_FSL_CLK
8c653124 AW	15
	16	#define CONFIG_MACH_TYPE 4146
	17
	18	#define CONFIG_SKIP_LOWLEVEL_INIT
	19
	20	/* Enable passing of ATAGs */
	21	#define CONFIG_CMDLINE_TAG
	22
8c653124 AW	23	#ifdef CONFIG_CMD_FUSE
	24	#define CONFIG_MXC_OCOTP
	25	#endif
	26
	27	/* Size of malloc() pool */
	28	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	29
8c653124 AW	30	/* Allow to overwrite serial and ethaddr */
8c653124 AW	31	#define CONFIG_ENV_OVERWRITE
8c653124	32
d6d07a9b	33	/* NAND support */
8fca2d8c	34	#define CONFIG_SYS_NAND_ONFI_DETECTION
d6d07a9b SA	35
d6d07a9b SA	36	#ifdef CONFIG_CMD_NAND
d6d07a9b SA	37	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	38	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	39
d6d07a9b	40	/* Dynamic MTD partition support */
d6d07a9b SA	41	#define CONFIG_MTD_PARTITIONS
	42	#define CONFIG_MTD_DEVICE
	43	#define MTDIDS_DEFAULT "nand0=fsl_nfc"
	44	#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
	45	"128k(vf-bcb)ro," \
	46	"1408k(u-boot)ro," \
	47	"512k(u-boot-env)," \
	48	"4m(kernel)," \
	49	"512k(fdt)," \
	50	"-(rootfs)"
	51	#endif
	52
8c653124 AW	53	#define CONFIG_FSL_ESDHC
	54	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	55	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	56
8c653124 AW	57	#define CONFIG_FEC_MXC
	58	#define CONFIG_MII
	59	#define IMX_FEC_BASE ENET_BASE_ADDR
	60	#define CONFIG_FEC_XCV_TYPE RMII
	61	#define CONFIG_FEC_MXC_PHYADDR 0
8c653124	62
cb6d04d6	63	/* QSPI Configs*/
cb6d04d6 CF	64
cb6d04d6 CF	65	#ifdef CONFIG_FSL_QSPI
cb6d04d6 CF	66	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	67	#define FSL_QSPI_FLASH_NUM 2
	68	#define CONFIG_SYS_FSL_QSPI_LE
	69	#endif
	70
1221b3d7	71	/* I2C Configs */
b089d039	72	#define CONFIG_SYS_I2C
b089d039	73	#define CONFIG_SYS_I2C_MXC
03544c66 AA	74	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	75	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
b089d039	76	#define CONFIG_SYS_SPD_BUS_NUM 0
1221b3d7	77
8c653124	78
cf04ad32	79	#define CONFIG_SYS_LOAD_ADDR 0x82000000
b188067f SA	80
	81	/* We boot from the gfxRAM area of the OCRAM. */
	82	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	83	#define CONFIG_BOARD_SIZE_LIMIT 524288
8c653124	84
cf04ad32 SA	85	/*
	86	* We do have 128MB of memory on the Vybrid Tower board. Leave the last
	87	* 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
	88	* DDR3. Hence, limit the memory range for image processing to 112MB
	89	* using bootm_size. All of the following must be within this range.
	90	* We have the default load at 32MB into DDR (for the kernel), FDT at
	91	* 64MB and the ramdisk 512KB above that (allowing for hopefully never
	92	* seen large trees). This allows a reasonable split between ramdisk
	93	* and kernel size, where the ram disk can be a bit larger.
	94	*/
	95	#define MEM_LAYOUT_ENV_SETTINGS \
	96	"bootm_size=0x07000000\0" \
	97	"loadaddr=0x82000000\0" \
	98	"kernel_addr_r=0x82000000\0" \
	99	"fdt_addr=0x84000000\0" \
	100	"fdt_addr_r=0x84000000\0" \
	101	"rdaddr=0x84080000\0" \
	102	"ramdisk_addr_r=0x84080000\0"
	103
ca21f61e	104	#define CONFIG_EXTRA_ENV_SETTINGS \
cf04ad32	105	MEM_LAYOUT_ENV_SETTINGS \
ca21f61e	106	"script=boot.scr\0" \
c0a5b081	107	"image=zImage\0" \
ca21f61e	108	"console=ttyLP1\0" \
ca21f61e	109	"fdt_file=vf610-twr.dtb\0" \
ca21f61e OS	110	"boot_fdt=try\0" \
	111	"ip_dyn=yes\0" \
	112	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	113	"mmcpart=1\0" \
	114	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	115	"update_sd_firmware_filename=u-boot.imx\0" \
	116	"update_sd_firmware=" \
	117	"if test ${ip_dyn} = yes; then " \
	118	"setenv get_cmd dhcp; " \
	119	"else " \
	120	"setenv get_cmd tftp; " \
	121	"fi; " \
	122	"if mmc dev ${mmcdev}; then " \
	123	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	124	"setexpr fw_sz ${filesize} / 0x200; " \
	125	"setexpr fw_sz ${fw_sz} + 1; " \
	126	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	127	"fi; " \
	128	"fi\0" \
	129	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	130	"root=${mmcroot}\0" \
	131	"loadbootscript=" \
	132	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	133	"bootscript=echo Running bootscript from mmc ...; " \
	134	"source\0" \
c0a5b081	135	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
ca21f61e OS	136	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	137	"mmcboot=echo Booting from mmc ...; " \
	138	"run mmcargs; " \
	139	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	140	"if run loadfdt; then " \
c0a5b081	141	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	142	"else " \
ca21f61e OS	143	"if test ${boot_fdt} = try; then " \
c0a5b081	144	"bootz; " \
ca21f61e OS	145	"else " \
	146	"echo WARN: Cannot load the DT; " \
	147	"fi; " \
	148	"fi; " \
	149	"else " \
c0a5b081	150	"bootz; " \
ca21f61e OS	151	"fi;\0" \
	152	"netargs=setenv bootargs console=${console},${baudrate} " \
	153	"root=/dev/nfs " \
	154	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	155	"netboot=echo Booting from net ...; " \
	156	"run netargs; " \
	157	"if test ${ip_dyn} = yes; then " \
	158	"setenv get_cmd dhcp; " \
	159	"else " \
	160	"setenv get_cmd tftp; " \
	161	"fi; " \
c0a5b081	162	"${get_cmd} ${image}; " \
ca21f61e OS	163	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
ca21f61e OS	164	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
c0a5b081	165	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	166	"else " \
ca21f61e OS	167	"if test ${boot_fdt} = try; then " \
c0a5b081	168	"bootz; " \
ca21f61e OS	169	"else " \
	170	"echo WARN: Cannot load the DT; " \
	171	"fi; " \
	172	"fi; " \
	173	"else " \
c0a5b081	174	"bootz; " \
ca21f61e OS	175	"fi;\0"
	176
	177	#define CONFIG_BOOTCOMMAND \
	178	"mmc dev ${mmcdev}; if mmc rescan; then " \
	179	"if run loadbootscript; then " \
	180	"run bootscript; " \
	181	"else " \
c0a5b081	182	"if run loadimage; then " \
ca21f61e OS	183	"run mmcboot; " \
	184	"else run netboot; " \
	185	"fi; " \
	186	"fi; " \
	187	"else run netboot; fi"
	188
8c653124 AW	189	/* Miscellaneous configurable options */
8c653124 AW	190	#define CONFIG_SYS_LONGHELP /* undef to save memory */
8c653124	191	#undef CONFIG_AUTO_COMPLETE
8c653124	192
8c653124 AW	193	#define CONFIG_SYS_MEMTEST_START 0x80010000
	194	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	195
8c653124 AW	196	/* Physical memory map */
	197	#define CONFIG_NR_DRAM_BANKS 1
	198	#define PHYS_SDRAM (0x80000000)
	199	#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
	200
	201	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	202	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	203	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	204
	205	#define CONFIG_SYS_INIT_SP_OFFSET \
	206	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	207	#define CONFIG_SYS_INIT_SP_ADDR \
	208	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	209
d6d07a9b	210	#ifdef CONFIG_ENV_IS_IN_MMC
8c653124	211	#define CONFIG_ENV_SIZE (8 * 1024)
8c653124 AW	212
	213	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	214	#define CONFIG_SYS_MMC_ENV_DEV 0
d6d07a9b SA	215	#endif
	216
	217	#ifdef CONFIG_ENV_IS_IN_NAND
	218	#define CONFIG_ENV_SIZE (64 * 2048)
	219	#define CONFIG_ENV_SECT_SIZE (64 * 2048)
	220	#define CONFIG_ENV_RANGE (512 * 1024)
	221	#define CONFIG_ENV_OFFSET 0x180000
	222	#endif
8c653124	223
8c653124	224	#endif