[people/ms/u-boot.git] / include / configs / vf610twr.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale Vybrid vf610twr board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

#define CONFIG_VF610

#define CONFIG_SYS_FSL_CLK

#define CONFIG_MACH_TYPE		4146

#define CONFIG_SKIP_LOWLEVEL_INIT

/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_SYS_NAND_ONFI_DETECTION

#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* UBI */
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define MTDIDS_DEFAULT			"nand0=fsl_nfc"
#define MTDPARTS_DEFAULT		"mtdparts=fsl_nfc:"		\
					"128k(vf-bcb)ro,"		\
					"1408k(u-boot)ro,"		\
					"512k(u-boot-env),"		\
					"4m(kernel),"			\
					"512k(fdt),"		\
					"-(rootfs)"
#endif

#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

/* QSPI Configs*/

#ifdef CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2
#define CONFIG_SYS_FSL_QSPI_LE
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_SPD_BUS_NUM		0


#define CONFIG_SYS_LOAD_ADDR		0x82000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

/*
 * We do have 128MB of memory on the Vybrid Tower board. Leave the last
 * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
 * DDR3. Hence, limit the memory range for image processing to 112MB
 * using bootm_size. All of the following must be within this range.
 * We have the default load at 32MB into DDR (for the kernel), FDT at
 * 64MB and the ramdisk 512KB above that (allowing for hopefully never
 * seen large trees). This allows a reasonable split between ramdisk
 * and kernel size, where the ram disk can be a bit larger.
 */
#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=0x07000000\0" \
	"loadaddr=0x82000000\0" \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr=0x84000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"rdaddr=0x84080000\0" \
	"ramdisk_addr_r=0x84080000\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	MEM_LAYOUT_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttyLP1\0" \
	"fdt_file=vf610-twr.dtb\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_SECT_SIZE		(64 * 2048)
#define CONFIG_ENV_RANGE		(512 * 1024)
#define CONFIG_ENV_OFFSET		0x180000
#endif

#endif
Commit	Line	Data
8c653124 AW	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale Vybrid vf610twr board.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
8c653124 AW	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
8c653124 AW	13
	14	#define CONFIG_VF610
	15
18fb0e3c	16	#define CONFIG_SYS_FSL_CLK
8c653124 AW	17
	18	#define CONFIG_MACH_TYPE 4146
	19
	20	#define CONFIG_SKIP_LOWLEVEL_INIT
	21
	22	/* Enable passing of ATAGs */
	23	#define CONFIG_CMDLINE_TAG
	24
	25	#define CONFIG_CMD_FUSE
	26	#ifdef CONFIG_CMD_FUSE
	27	#define CONFIG_MXC_OCOTP
	28	#endif
	29
	30	/* Size of malloc() pool */
	31	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	32
8c653124 AW	33	/* Allow to overwrite serial and ethaddr */
8c653124 AW	34	#define CONFIG_ENV_OVERWRITE
8c653124 AW	35	#define CONFIG_BAUDRATE 115200
8c653124 AW	36
d6d07a9b SA	37	/* NAND support */
	38	#define CONFIG_CMD_NAND
	39	#define CONFIG_CMD_NAND_TRIMFFS
8fca2d8c	40	#define CONFIG_SYS_NAND_ONFI_DETECTION
d6d07a9b SA	41
d6d07a9b SA	42	#ifdef CONFIG_CMD_NAND
d6d07a9b SA	43	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	44	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	45
	46	/* UBI */
d6d07a9b	47	#define CONFIG_CMD_UBIFS
d6d07a9b SA	48	#define CONFIG_RBTREE
d6d07a9b SA	49	#define CONFIG_LZO
d6d07a9b SA	50
	51	/* Dynamic MTD partition support */
	52	#define CONFIG_CMD_MTDPARTS
	53	#define CONFIG_MTD_PARTITIONS
	54	#define CONFIG_MTD_DEVICE
	55	#define MTDIDS_DEFAULT "nand0=fsl_nfc"
	56	#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
	57	"128k(vf-bcb)ro," \
	58	"1408k(u-boot)ro," \
	59	"512k(u-boot-env)," \
	60	"4m(kernel)," \
	61	"512k(fdt)," \
	62	"-(rootfs)"
	63	#endif
	64
8c653124 AW	65	#define CONFIG_FSL_ESDHC
	66	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	67	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	68
8c653124 AW	69	#define CONFIG_FEC_MXC
	70	#define CONFIG_MII
	71	#define IMX_FEC_BASE ENET_BASE_ADDR
	72	#define CONFIG_FEC_XCV_TYPE RMII
	73	#define CONFIG_FEC_MXC_PHYADDR 0
	74	#define CONFIG_PHYLIB
	75	#define CONFIG_PHY_MICREL
	76
cb6d04d6	77	/* QSPI Configs*/
cb6d04d6 CF	78
cb6d04d6 CF	79	#ifdef CONFIG_FSL_QSPI
cb6d04d6 CF	80	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	81	#define FSL_QSPI_FLASH_NUM 2
	82	#define CONFIG_SYS_FSL_QSPI_LE
	83	#endif
	84
1221b3d7	85	/* I2C Configs */
b089d039	86	#define CONFIG_SYS_I2C
b089d039	87	#define CONFIG_SYS_I2C_MXC
03544c66 AA	88	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	89	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
b089d039	90	#define CONFIG_SYS_SPD_BUS_NUM 0
1221b3d7	91
8c653124	92
cf04ad32	93	#define CONFIG_SYS_LOAD_ADDR 0x82000000
b188067f SA	94
	95	/* We boot from the gfxRAM area of the OCRAM. */
	96	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	97	#define CONFIG_BOARD_SIZE_LIMIT 524288
8c653124	98
cf04ad32 SA	99	/*
	100	* We do have 128MB of memory on the Vybrid Tower board. Leave the last
	101	* 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
	102	* DDR3. Hence, limit the memory range for image processing to 112MB
	103	* using bootm_size. All of the following must be within this range.
	104	* We have the default load at 32MB into DDR (for the kernel), FDT at
	105	* 64MB and the ramdisk 512KB above that (allowing for hopefully never
	106	* seen large trees). This allows a reasonable split between ramdisk
	107	* and kernel size, where the ram disk can be a bit larger.
	108	*/
	109	#define MEM_LAYOUT_ENV_SETTINGS \
	110	"bootm_size=0x07000000\0" \
	111	"loadaddr=0x82000000\0" \
	112	"kernel_addr_r=0x82000000\0" \
	113	"fdt_addr=0x84000000\0" \
	114	"fdt_addr_r=0x84000000\0" \
	115	"rdaddr=0x84080000\0" \
	116	"ramdisk_addr_r=0x84080000\0"
	117
ca21f61e	118	#define CONFIG_EXTRA_ENV_SETTINGS \
cf04ad32	119	MEM_LAYOUT_ENV_SETTINGS \
ca21f61e	120	"script=boot.scr\0" \
c0a5b081	121	"image=zImage\0" \
ca21f61e	122	"console=ttyLP1\0" \
ca21f61e	123	"fdt_file=vf610-twr.dtb\0" \
ca21f61e OS	124	"boot_fdt=try\0" \
	125	"ip_dyn=yes\0" \
	126	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	127	"mmcpart=1\0" \
	128	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	129	"update_sd_firmware_filename=u-boot.imx\0" \
	130	"update_sd_firmware=" \
	131	"if test ${ip_dyn} = yes; then " \
	132	"setenv get_cmd dhcp; " \
	133	"else " \
	134	"setenv get_cmd tftp; " \
	135	"fi; " \
	136	"if mmc dev ${mmcdev}; then " \
	137	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	138	"setexpr fw_sz ${filesize} / 0x200; " \
	139	"setexpr fw_sz ${fw_sz} + 1; " \
	140	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	141	"fi; " \
	142	"fi\0" \
	143	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	144	"root=${mmcroot}\0" \
	145	"loadbootscript=" \
	146	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	147	"bootscript=echo Running bootscript from mmc ...; " \
	148	"source\0" \
c0a5b081	149	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
ca21f61e OS	150	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	151	"mmcboot=echo Booting from mmc ...; " \
	152	"run mmcargs; " \
	153	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	154	"if run loadfdt; then " \
c0a5b081	155	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	156	"else " \
ca21f61e OS	157	"if test ${boot_fdt} = try; then " \
c0a5b081	158	"bootz; " \
ca21f61e OS	159	"else " \
	160	"echo WARN: Cannot load the DT; " \
	161	"fi; " \
	162	"fi; " \
	163	"else " \
c0a5b081	164	"bootz; " \
ca21f61e OS	165	"fi;\0" \
	166	"netargs=setenv bootargs console=${console},${baudrate} " \
	167	"root=/dev/nfs " \
	168	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	169	"netboot=echo Booting from net ...; " \
	170	"run netargs; " \
	171	"if test ${ip_dyn} = yes; then " \
	172	"setenv get_cmd dhcp; " \
	173	"else " \
	174	"setenv get_cmd tftp; " \
	175	"fi; " \
c0a5b081	176	"${get_cmd} ${image}; " \
ca21f61e OS	177	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
ca21f61e OS	178	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
c0a5b081	179	"bootz ${loadaddr} - ${fdt_addr}; " \
ca21f61e OS	180	"else " \
ca21f61e OS	181	"if test ${boot_fdt} = try; then " \
c0a5b081	182	"bootz; " \
ca21f61e OS	183	"else " \
	184	"echo WARN: Cannot load the DT; " \
	185	"fi; " \
	186	"fi; " \
	187	"else " \
c0a5b081	188	"bootz; " \
ca21f61e OS	189	"fi;\0"
	190
	191	#define CONFIG_BOOTCOMMAND \
	192	"mmc dev ${mmcdev}; if mmc rescan; then " \
	193	"if run loadbootscript; then " \
	194	"run bootscript; " \
	195	"else " \
c0a5b081	196	"if run loadimage; then " \
ca21f61e OS	197	"run mmcboot; " \
	198	"else run netboot; " \
	199	"fi; " \
	200	"fi; " \
	201	"else run netboot; fi"
	202
8c653124 AW	203	/* Miscellaneous configurable options */
8c653124 AW	204	#define CONFIG_SYS_LONGHELP /* undef to save memory */
8c653124 AW	205	#undef CONFIG_AUTO_COMPLETE
	206	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	207	#define CONFIG_SYS_PBSIZE \
	208	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	209	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	210	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	211
8c653124 AW	212	#define CONFIG_SYS_MEMTEST_START 0x80010000
	213	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	214
8c653124 AW	215	/*
	216	* Stack sizes
	217	* The stack sizes are set up in start.S using the settings below
	218	*/
	219	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	220
	221	/* Physical memory map */
	222	#define CONFIG_NR_DRAM_BANKS 1
	223	#define PHYS_SDRAM (0x80000000)
	224	#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
	225
	226	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	227	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	228	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	229
	230	#define CONFIG_SYS_INIT_SP_OFFSET \
	231	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	232	#define CONFIG_SYS_INIT_SP_ADDR \
	233	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	234
d6d07a9b	235	#ifdef CONFIG_ENV_IS_IN_MMC
8c653124	236	#define CONFIG_ENV_SIZE (8 * 1024)
8c653124 AW	237
	238	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	239	#define CONFIG_SYS_MMC_ENV_DEV 0
d6d07a9b SA	240	#endif
	241
	242	#ifdef CONFIG_ENV_IS_IN_NAND
	243	#define CONFIG_ENV_SIZE (64 * 2048)
	244	#define CONFIG_ENV_SECT_SIZE (64 * 2048)
	245	#define CONFIG_ENV_RANGE (512 * 1024)
	246	#define CONFIG_ENV_OFFSET 0x180000
	247	#endif
8c653124	248
8c653124	249	#endif