[people/ms/u-boot.git] / include / configs / wandboard.h

/*
 * Copyright (C) 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Wandboard.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
#include <linux/sizes.h>

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#include "imx6_spl.h"

#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define MACH_TYPE_WANDBOARD		4412
#define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

#define CONFIG_SYS_GENERIC_BOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Command definition */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS

#define CONFIG_CMD_BMODE
#define CONFIG_CMD_SETEXPR

#define CONFIG_BOOTDELAY		5

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
#define CONFIG_LOADADDR			0x12000000
#define CONFIG_SYS_TEXT_BASE		0x17800000

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000

/* MMC Configuration */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_USDHC_NUM	2
#define CONFIG_SYS_FSL_ESDHC_ADDR	0

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0

/* Ethernet Configuration */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"splashpos=m,m\0" \
	"fdtfile=undefined\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"update_sd_firmware_filename=u-boot.imx\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}; run videoargs\0" \
	"videoargs=" \
		"setenv nextcon 0; " \
		"if hdmidet; then " \
			"setenv bootargs ${bootargs} " \
				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
					"if=RGB24; " \
			"setenv fbmen fbmem=28M; " \
			"setexpr nextcon ${nextcon} + 1; " \
		"else " \
			"echo - no HDMI monitor;" \
		"fi; " \
		"i2c dev 1; " \
		"if i2c probe 0x10; then " \
			"setenv bootargs ${bootargs} " \
				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
					"if=RGB666,bpp=32; " \
			"if test 0 -eq ${nextcon}; then " \
				"setenv fbmem fbmem=10M; " \
			"else " \
				"setenv fbmem ${fbmem},10M; " \
			"fi; " \
			"setexpr nextcon ${nextcon} + 1; " \
		"else " \
			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
		"fi; " \
		"setenv bootargs ${bootargs} ${fbmem}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"findfdt="\
		"if test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
		"if test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
		"if test $fdtfile = undefined; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \

#define CONFIG_BOOTCOMMAND \
	   "run findfdt; " \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS	       16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#endif			       /* __CONFIG_H * */
Commit	Line	Data
e2d282a1 FE	1	/*
	2	* Copyright (C) 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Wandboard.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
e2d282a1 FE	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
02824dc7	12	#include "mx6_common.h"
e2d282a1 FE	13	#include <asm/arch/imx-regs.h>
e2d282a1 FE	14	#include <asm/imx-common/gpio.h>
1ace4022	15	#include <linux/sizes.h>
e2d282a1	16
0d1ea052 FE	17	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	18	#define CONFIG_SPL_MMC_SUPPORT
	19	#include "imx6_spl.h"
	20
e2d282a1 FE	21	#define CONFIG_MX6
	22	#define CONFIG_DISPLAY_CPUINFO
	23	#define CONFIG_DISPLAY_BOARDINFO
	24
	25	#define MACH_TYPE_WANDBOARD 4412
	26	#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD
	27
	28	#define CONFIG_CMDLINE_TAG
	29	#define CONFIG_SETUP_MEMORY_TAGS
	30	#define CONFIG_INITRD_TAG
	31	#define CONFIG_REVISION_TAG
	32
7f5d0af8 FE	33	#define CONFIG_SYS_GENERIC_BOARD
7f5d0af8 FE	34
e2d282a1	35	/* Size of malloc() pool */
7bcb983f	36	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
e2d282a1 FE	37
e2d282a1 FE	38	#define CONFIG_BOARD_EARLY_INIT_F
eaffaa2d	39	#define CONFIG_BOARD_LATE_INIT
e2d282a1 FE	40	#define CONFIG_MXC_GPIO
	41
	42	#define CONFIG_MXC_UART
	43	#define CONFIG_MXC_UART_BASE UART1_BASE
	44
	45	/* allow to overwrite serial and ethaddr */
	46	#define CONFIG_ENV_OVERWRITE
	47	#define CONFIG_CONS_INDEX 1
	48	#define CONFIG_BAUDRATE 115200
	49
	50	/* Command definition */
	51	#include <config_cmd_default.h>
	52
	53	#undef CONFIG_CMD_IMLS
	54
eaffaa2d	55	#define CONFIG_CMD_BMODE
0798d578 OS	56	#define CONFIG_CMD_SETEXPR
0798d578 OS	57
e2d282a1 FE	58	#define CONFIG_BOOTDELAY 5
	59
	60	#define CONFIG_SYS_MEMTEST_START 0x10000000
	61	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
	62	#define CONFIG_LOADADDR 0x12000000
	63	#define CONFIG_SYS_TEXT_BASE 0x17800000
	64
8bc7c487 OS	65	/* I2C Configs */
	66	#define CONFIG_CMD_I2C
	67	#define CONFIG_SYS_I2C
	68	#define CONFIG_SYS_I2C_MXC
f8cb101e	69	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
8bc7c487 OS	70	#define CONFIG_SYS_I2C_SPEED 100000
8bc7c487 OS	71
e2d282a1 FE	72	/* MMC Configuration */
	73	#define CONFIG_FSL_ESDHC
	74	#define CONFIG_FSL_USDHC
5ed15738	75	#define CONFIG_SYS_FSL_USDHC_NUM 2
e2d282a1	76	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
e2d282a1 FE	77
	78	#define CONFIG_MMC
	79	#define CONFIG_CMD_MMC
	80	#define CONFIG_GENERIC_MMC
	81	#define CONFIG_BOUNCE_BUFFER
	82	#define CONFIG_CMD_EXT2
	83	#define CONFIG_CMD_FAT
	84	#define CONFIG_DOS_PARTITION
	85
9df47577 JH	86	/* USB Configs */
	87	#define CONFIG_CMD_USB
	88	#define CONFIG_USB_EHCI
	89	#define CONFIG_USB_EHCI_MX6
	90	#define CONFIG_USB_STORAGE
	91	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	92	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	93	#define CONFIG_MXC_USB_FLAGS 0
	94
e2d282a1 FE	95	/* Ethernet Configuration */
	96	#define CONFIG_CMD_PING
	97	#define CONFIG_CMD_DHCP
	98	#define CONFIG_CMD_MII
	99	#define CONFIG_CMD_NET
	100	#define CONFIG_FEC_MXC
	101	#define CONFIG_MII
	102	#define IMX_FEC_BASE ENET_BASE_ADDR
	103	#define CONFIG_FEC_XCV_TYPE RGMII
	104	#define CONFIG_ETHPRIME "FEC"
	105	#define CONFIG_FEC_MXC_PHYADDR 1
	106	#define CONFIG_PHYLIB
	107	#define CONFIG_PHY_ATHEROS
	108
7bcb983f FE	109	/* Framebuffer */
	110	#define CONFIG_VIDEO
	111	#define CONFIG_VIDEO_IPUV3
	112	#define CONFIG_CFB_CONSOLE
	113	#define CONFIG_VGA_AS_SINGLE_DEVICE
	114	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	115	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	116	#define CONFIG_VIDEO_BMP_RLE8
	117	#define CONFIG_SPLASH_SCREEN
a7efb026	118	#define CONFIG_SPLASH_SCREEN_ALIGN
7bcb983f FE	119	#define CONFIG_BMP_16BPP
7bcb983f FE	120	#define CONFIG_VIDEO_LOGO
a7efb026	121	#define CONFIG_VIDEO_BMP_LOGO
7bcb983f	122	#define CONFIG_IPUV3_CLK 260000000
0ef797a5	123	#define CONFIG_CMD_HDMIDETECT
5ea7f0e3	124	#define CONFIG_IMX_HDMI
8bc7c487	125	#define CONFIG_IMX_VIDEO_SKIP
7bcb983f	126
9f87640c FE	127	#define CONFIG_CMD_FUSE
	128	#ifdef CONFIG_CMD_FUSE
	129	#define CONFIG_MXC_OCOTP
	130	#endif
	131
0d1ea052	132	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
e2d282a1 FE	133	#define CONFIG_EXTRA_ENV_SETTINGS \
e2d282a1 FE	134	"script=boot.scr\0" \
f3533970	135	"image=zImage\0" \
e2d282a1	136	"console=ttymxc0\0" \
d727ab3c	137	"splashpos=m,m\0" \
0d1ea052	138	"fdtfile=undefined\0" \
e2d282a1 FE	139	"fdt_high=0xffffffff\0" \
e2d282a1 FE	140	"initrd_high=0xffffffff\0" \
6584a1b5	141	"fdt_addr=0x18000000\0" \
e2d282a1 FE	142	"boot_fdt=try\0" \
e2d282a1 FE	143	"ip_dyn=yes\0" \
1e1cbde0	144	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
86812c4d OS	145	"mmcpart=1\0" \
86812c4d OS	146	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
0798d578 OS	147	"update_sd_firmware_filename=u-boot.imx\0" \
	148	"update_sd_firmware=" \
	149	"if test ${ip_dyn} = yes; then " \
	150	"setenv get_cmd dhcp; " \
	151	"else " \
	152	"setenv get_cmd tftp; " \
	153	"fi; " \
	154	"if mmc dev ${mmcdev}; then " \
	155	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	156	"setexpr fw_sz ${filesize} / 0x200; " \
	157	"setexpr fw_sz ${fw_sz} + 1; " \
	158	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	159	"fi; " \
	160	"fi\0" \
e2d282a1	161	"mmcargs=setenv bootargs console=${console},${baudrate} " \
0ef797a5 OS	162	"root=${mmcroot}; run videoargs\0" \
	163	"videoargs=" \
	164	"setenv nextcon 0; " \
	165	"if hdmidet; then " \
	166	"setenv bootargs ${bootargs} " \
	167	"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
	168	"if=RGB24; " \
	169	"setenv fbmen fbmem=28M; " \
	170	"setexpr nextcon ${nextcon} + 1; " \
	171	"else " \
	172	"echo - no HDMI monitor;" \
	173	"fi; " \
	174	"i2c dev 1; " \
	175	"if i2c probe 0x10; then " \
	176	"setenv bootargs ${bootargs} " \
	177	"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
99c618ff	178	"if=RGB666,bpp=32; " \
0ef797a5 OS	179	"if test 0 -eq ${nextcon}; then " \
	180	"setenv fbmem fbmem=10M; " \
	181	"else " \
	182	"setenv fbmem ${fbmem},10M; " \
	183	"fi; " \
	184	"setexpr nextcon ${nextcon} + 1; " \
	185	"else " \
	186	"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
	187	"fi; " \
	188	"setenv bootargs ${bootargs} ${fbmem}\0" \
e2d282a1 FE	189	"loadbootscript=" \
	190	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	191	"bootscript=echo Running bootscript from mmc ...; " \
	192	"source\0" \
f3533970	193	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
0d1ea052	194	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
e2d282a1 FE	195	"mmcboot=echo Booting from mmc ...; " \
	196	"run mmcargs; " \
	197	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	198	"if run loadfdt; then " \
f3533970	199	"bootz ${loadaddr} - ${fdt_addr}; " \
e2d282a1 FE	200	"else " \
e2d282a1 FE	201	"if test ${boot_fdt} = try; then " \
f3533970	202	"bootz; " \
e2d282a1 FE	203	"else " \
	204	"echo WARN: Cannot load the DT; " \
	205	"fi; " \
	206	"fi; " \
	207	"else " \
f3533970	208	"bootz; " \
e2d282a1 FE	209	"fi;\0" \
	210	"netargs=setenv bootargs console=${console},${baudrate} " \
	211	"root=/dev/nfs " \
	212	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	213	"netboot=echo Booting from net ...; " \
	214	"run netargs; " \
	215	"if test ${ip_dyn} = yes; then " \
	216	"setenv get_cmd dhcp; " \
	217	"else " \
	218	"setenv get_cmd tftp; " \
	219	"fi; " \
f3533970	220	"${get_cmd} ${image}; " \
e2d282a1	221	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
0d1ea052	222	"if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
f3533970	223	"bootz ${loadaddr} - ${fdt_addr}; " \
e2d282a1 FE	224	"else " \
e2d282a1 FE	225	"if test ${boot_fdt} = try; then " \
f3533970	226	"bootz; " \
e2d282a1 FE	227	"else " \
	228	"echo WARN: Cannot load the DT; " \
	229	"fi; " \
	230	"fi; " \
	231	"else " \
f3533970	232	"bootz; " \
0d1ea052 FE	233	"fi;\0" \
	234	"findfdt="\
	235	"if test $board_rev = MX6Q ; then " \
	236	"setenv fdtfile imx6q-wandboard.dtb; fi; " \
	237	"if test $board_rev = MX6DL ; then " \
	238	"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
	239	"if test $fdtfile = undefined; then " \
	240	"echo WARNING: Could not determine dtb to use; fi; \0" \
e2d282a1 FE	241
e2d282a1 FE	242	#define CONFIG_BOOTCOMMAND \
0d1ea052	243	"run findfdt; " \
e2d282a1 FE	244	"mmc dev ${mmcdev}; if mmc rescan; then " \
	245	"if run loadbootscript; then " \
	246	"run bootscript; " \
	247	"else " \
f3533970	248	"if run loadimage; then " \
e2d282a1 FE	249	"run mmcboot; " \
	250	"else run netboot; " \
	251	"fi; " \
	252	"fi; " \
	253	"else run netboot; fi"
	254
	255	/* Miscellaneous configurable options */
	256	#define CONFIG_SYS_LONGHELP
	257	#define CONFIG_SYS_HUSH_PARSER
e2d282a1 FE	258	#define CONFIG_AUTO_COMPLETE
e2d282a1 FE	259	#define CONFIG_SYS_CBSIZE 256
e2d282a1 FE	260	#define CONFIG_SYS_MAXARGS 16
	261	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	262
	263	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
e2d282a1 FE	264
	265	#define CONFIG_CMDLINE_EDITING
	266
	267	/* Physical Memory Map */
	268	#define CONFIG_NR_DRAM_BANKS 1
	269	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	270
	271	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	272	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	273	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	274
	275	#define CONFIG_SYS_INIT_SP_OFFSET \
	276	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	277	#define CONFIG_SYS_INIT_SP_ADDR \
	278	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	279
	280	/* FLASH and environment organization */
	281	#define CONFIG_SYS_NO_FLASH
	282
	283	#define CONFIG_ENV_SIZE (8 * 1024)
	284
	285	#define CONFIG_ENV_IS_IN_MMC
	286	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	287	#define CONFIG_SYS_MMC_ENV_DEV 0
	288
	289	#define CONFIG_OF_LIBFDT
	290	#define CONFIG_CMD_BOOTZ
	291
	292	#ifndef CONFIG_SYS_DCACHE_OFF
	293	#define CONFIG_CMD_CACHE
	294	#endif
	295
	296	#endif /* __CONFIG_H * */