[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

/*
 * Configuration for Xilinx ZynqMP
 * (C) Copyright 2014 - 2015 Xilinx, Inc.
 * Michal Simek <michal.simek@xilinx.com>
 *
 * Based on Configuration for Versatile Express
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __XILINX_ZYNQMP_H
#define __XILINX_ZYNQMP_H

#define CONFIG_REMAKE_ELF

/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */

#define CONFIG_SYS_NO_FLASH

#define CONFIG_SYS_GENERIC_BOARD

/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE	0xF9010000
#define GICC_BASE	0xF9020000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		0
#define CONFIG_SYS_SDRAM_SIZE		0x40000000

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_SDRAM_SIZE

/* Have release address at the end of 256MB for now */
#define CPU_RELEASE_ADDR	0xFFFFFF0

/* Cache Definitions */
#define CONFIG_SYS_CACHELINE_SIZE	64

#define CONFIG_IDENT_STRING		" Xilinx ZynqMP"

#define CONFIG_SYS_TEXT_BASE		0x8000000
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)

/* Flat Device Tree Definitions */
#define CONFIG_OF_LIBFDT

/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#define COUNTER_FREQUENCY		4000000

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x400000)

/* Serial setup */
#define CONFIG_ZYNQ_SERIAL_UART0
#define CONFIG_ZYNQ_SERIAL

#define CONFIG_CONS_INDEX		0
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 4800, 9600, 19200, 38400, 57600, 115200 }

/* Command line configuration */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_CMD_MEMORY
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_ELF
#define CONFIG_MP

#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SDHCI
# define CONFIG_ZYNQ_SDHCI
# define CONFIG_CMD_MMC
#endif

#if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_FAT_WRITE
# define CONFIG_CMD_EXT4_WRITE
#endif

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		0x8000000

/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr=0x80000\0" \
	"fdt_addr=0x7000000\0" \
	"fdt_high=0x10000000\0" \
	"sdboot=mmcinfo && fatload mmc 0:0 $fdt_addr system.dtb && " \
		"fatload mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0"

#define CONFIG_BOOTARGS		"setenv bootargs console=ttyPS0,${baudrate} " \
				"earlycon=cdns,mmio,0xff000000,${baudrate}n8"
#define CONFIG_PREBOOT		"run bootargs"
#define CONFIG_BOOTCOMMAND	"run $modeboot"
#define CONFIG_BOOTDELAY	5

#define CONFIG_BOARD_LATE_INIT

/* Do not preserve environment */
#define CONFIG_ENV_IS_NOWHERE		1
#define CONFIG_ENV_SIZE			0x1000

/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		2048
#define CONFIG_SYS_PROMPT		"ZynqMP> "
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64

#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE       /* enable fit_format_{error,warning}() */

#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)

#define CONFIG_CMD_BOOTI
#define CONFIG_CMD_UNZIP

#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_CLOCKS

#endif /* __XILINX_ZYNQMP_H */
Commit	Line	Data
84c7204b MS	1	/*
	2	* Configuration for Xilinx ZynqMP
	3	* (C) Copyright 2014 - 2015 Xilinx, Inc.
	4	* Michal Simek <michal.simek@xilinx.com>
	5	*
	6	* Based on Configuration for Versatile Express
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __XILINX_ZYNQMP_H
	12	#define __XILINX_ZYNQMP_H
	13
	14	#define CONFIG_REMAKE_ELF
	15
	16	/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
	17
	18	#define CONFIG_SYS_NO_FLASH
	19
	20	#define CONFIG_SYS_GENERIC_BOARD
	21
	22	/* Generic Interrupt Controller Definitions */
	23	#define CONFIG_GICV2
	24	#define GICD_BASE 0xF9010000
	25	#define GICC_BASE 0xF9020000
	26
	27	/* Physical Memory Map */
	28	#define CONFIG_NR_DRAM_BANKS 1
	29	#define CONFIG_SYS_SDRAM_BASE 0
	30	#define CONFIG_SYS_SDRAM_SIZE 0x40000000
	31
	32	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	33	#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE
	34
	35	/* Have release address at the end of 256MB for now */
	36	#define CPU_RELEASE_ADDR 0xFFFFFF0
	37
	38	/* Cache Definitions */
222b2129	39	#define CONFIG_SYS_CACHELINE_SIZE 64
84c7204b MS	40
	41	#define CONFIG_IDENT_STRING " Xilinx ZynqMP"
	42
	43	#define CONFIG_SYS_TEXT_BASE 0x8000000
	44	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	45
	46	/* Flat Device Tree Definitions */
	47	#define CONFIG_OF_LIBFDT
	48
	49	/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
	50	#define COUNTER_FREQUENCY 4000000
	51
	52	/* Size of malloc() pool */
	53	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x400000)
	54
	55	/* Serial setup */
	56	#define CONFIG_ZYNQ_SERIAL_UART0
	57	#define CONFIG_ZYNQ_SERIAL
	58
	59	#define CONFIG_CONS_INDEX 0
	60	#define CONFIG_BAUDRATE 115200
	61	#define CONFIG_SYS_BAUDRATE_TABLE \
	62	{ 4800, 9600, 19200, 38400, 57600, 115200 }
	63
	64	/* Command line configuration */
	65	#define CONFIG_CMD_ENV
	66	#define CONFIG_CMD_EXT2
	67	#define CONFIG_CMD_EXT4
	68	#define CONFIG_CMD_FAT
	69	#define CONFIG_CMD_MEMORY
	70	#define CONFIG_DOS_PARTITION
5cb24200 MS	71	#define CONFIG_CMD_ELF
5cb24200 MS	72	#define CONFIG_MP
84c7204b MS	73
	74	#if defined(CONFIG_ZYNQ_SDHCI0) \|\| defined(CONFIG_ZYNQ_SDHCI1)
	75	# define CONFIG_MMC
	76	# define CONFIG_GENERIC_MMC
	77	# define CONFIG_SDHCI
	78	# define CONFIG_ZYNQ_SDHCI
	79	# define CONFIG_CMD_MMC
	80	#endif
	81
	82	#if defined(CONFIG_ZYNQ_SDHCI)
	83	# define CONFIG_FAT_WRITE
	84	# define CONFIG_CMD_EXT4_WRITE
	85	#endif
	86
	87	/* Miscellaneous configurable options */
	88	#define CONFIG_SYS_LOAD_ADDR 0x8000000
	89
	90	/* Initial environment variables */
	91	#define CONFIG_EXTRA_ENV_SETTINGS \
	92	"kernel_addr=0x80000\0" \
	93	"fdt_addr=0x7000000\0" \
	94	"fdt_high=0x10000000\0" \
	95	"sdboot=mmcinfo && fatload mmc 0:0 $fdt_addr system.dtb && " \
	96	"fatload mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0"
	97
	98	#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \
	99	"earlycon=cdns,mmio,0xff000000,${baudrate}n8"
	100	#define CONFIG_PREBOOT "run bootargs"
	101	#define CONFIG_BOOTCOMMAND "run $modeboot"
	102	#define CONFIG_BOOTDELAY 5
	103
	104	#define CONFIG_BOARD_LATE_INIT
	105
	106	/* Do not preserve environment */
	107	#define CONFIG_ENV_IS_NOWHERE 1
	108	#define CONFIG_ENV_SIZE 0x1000
	109
	110	/* Monitor Command Prompt */
	111	/* Console I/O Buffer Size */
	112	#define CONFIG_SYS_CBSIZE 2048
	113	#define CONFIG_SYS_PROMPT "ZynqMP> "
	114	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	115	sizeof(CONFIG_SYS_PROMPT) + 16)
	116	#define CONFIG_SYS_HUSH_PARSER
	117	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	118	#define CONFIG_SYS_LONGHELP
	119	#define CONFIG_CMDLINE_EDITING
	120	#define CONFIG_SYS_MAXARGS 64
	121
	122	#define CONFIG_FIT
	123	#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
	124
	125	#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
	126
	127	#define CONFIG_CMD_BOOTI
	128	#define CONFIG_CMD_UNZIP
	129
	130	#define CONFIG_BOARD_EARLY_INIT_R
	131	#define CONFIG_CLOCKS
	132
	133	#endif /* __XILINX_ZYNQMP_H */