[people/ms/u-boot.git] / include / configs / xtfpga.h

/*
 * Copyright (C) 2007-2013 Tensilica, Inc.
 * Copyright (C) 2014 - 2016 Cadence Design Systems Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/core.h>
#include <asm/addrspace.h>
#include <asm/config.h>

/*
 * The 'xtfpga' board describes a set of very similar boards with only minimal
 * differences.
 */

/*=====================*/
/* Board and Processor */
/*=====================*/

#define CONFIG_XTFPGA

/* FPGA CPU freq after init */
#define CONFIG_SYS_CLK_FREQ		(gd->cpu_clk)

/*===================*/
/* RAM Layout        */
/*===================*/

#if XCHAL_HAVE_PTP_MMU
#define CONFIG_SYS_MEMORY_BASE		\
	(XCHAL_VECBASE_RESET_VADDR - XCHAL_VECBASE_RESET_PADDR)
#define CONFIG_SYS_IO_BASE		0xf0000000
#else
#define CONFIG_SYS_MEMORY_BASE		0x60000000
#define CONFIG_SYS_IO_BASE		0x90000000
#define CONFIG_MAX_MEM_MAPPED		0x10000000
#endif

/* Onboard RAM sizes:
 *
 * LX60		0x04000000		  64 MB
 * LX110	0x03000000		  48 MB
 * LX200	0x06000000		  96 MB
 * ML605	0x18000000		 384 MB
 * KC705	0x38000000		 896 MB
 *
 * noMMU configurations can only see first 256MB of onboard memory.
 */

#if XCHAL_HAVE_PTP_MMU || CONFIG_BOARD_SDRAM_SIZE < 0x10000000
#define CONFIG_SYS_SDRAM_SIZE		CONFIG_BOARD_SDRAM_SIZE
#else
#define CONFIG_SYS_SDRAM_SIZE		0x10000000
#endif

#define CONFIG_SYS_SDRAM_BASE		MEMADDR(0x00000000)

/* Lx60 can only map 128kb memory (instead of 256kb) when running under OCD */
#ifdef CONFIG_XTFPGA_LX60
# define CONFIG_SYS_MONITOR_LEN		0x00020000	/* 128KB */
#else
# define CONFIG_SYS_MONITOR_LEN		0x00040000	/* 256KB */
#endif

#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* heap  256KB */

/* Linux boot param area in RAM (used only when booting linux) */
#define CONFIG_SYS_BOOTPARAMS_LEN	(64  << 10)

/* Memory test is destructive so default must not overlap vectors or U-Boot*/
#define CONFIG_SYS_MEMTEST_START	MEMADDR(0x01000000)
#define CONFIG_SYS_MEMTEST_END		MEMADDR(0x02000000)

/* Load address for stand-alone applications.
 * MEMADDR cannot be used here, because the definition needs to be
 * a plain number as it's used as -Ttext argument for ld in standalone
 * example makefile.
 * Handle noMMU vs MMUv2 vs MMUv3 distinction here manually.
 */
#if XCHAL_HAVE_PTP_MMU
#if XCHAL_VECBASE_RESET_VADDR == XCHAL_VECBASE_RESET_PADDR
#define CONFIG_STANDALONE_LOAD_ADDR	0x00800000
#else
#define CONFIG_STANDALONE_LOAD_ADDR	0xd0800000
#endif
#else
#define CONFIG_STANDALONE_LOAD_ADDR	0x60800000
#endif

#if defined(CONFIG_MAX_MEM_MAPPED) && \
	CONFIG_MAX_MEM_MAPPED < CONFIG_SYS_SDRAM_SIZE
#define CONFIG_SYS_MEMORY_SIZE		CONFIG_MAX_MEM_MAPPED
#else
#define CONFIG_SYS_MEMORY_SIZE		CONFIG_SYS_SDRAM_SIZE
#endif

#define CONFIG_SYS_MEMORY_TOP		MEMADDR(CONFIG_SYS_MEMORY_SIZE)
#define CONFIG_SYS_TEXT_ADDR		\
	(CONFIG_SYS_MEMORY_TOP - CONFIG_SYS_MONITOR_LEN)

/* Used by tftpboot; env var 'loadaddr' */
#define CONFIG_SYS_LOAD_ADDR		MEMADDR(0x02000000)

/*==============================*/
/* U-Boot general configuration */
/*==============================*/

#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_MISC_INIT_R

#define CONFIG_BOOTFILE			"uImage"
	/* Console I/O Buffer Size  */
#define CONFIG_SYS_CBSIZE		1024
	/* Prt buf */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					 sizeof(CONFIG_SYS_PROMPT) + 16)
	/* max number of command args */
#define CONFIG_SYS_MAXARGS		16
	/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/*==============================*/
/* U-Boot autoboot configuration */
/*==============================*/

#define CONFIG_BOOT_RETRY_TIME		60	/* retry after 60 secs */

#define CONFIG_AUTO_COMPLETE			/* Support tab autocompletion */
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_LONGHELP
#define CONFIG_MX_CYCLIC
#define CONFIG_SHOW_BOOT_PROGRESS

#ifdef DEBUG
#define CONFIG_PANIC_HANG		1	/* Require manual reboot */
#endif


/*=========================================*/
/* FPGA Registers (board info and control) */
/*=========================================*/

/*
 * These assume FPGA bitstreams from Tensilica release RB and up. Earlier
 * releases may not provide any/all of these registers or at these offsets.
 * Some of the FPGA registers are broken down into bitfields described by
 * SHIFT left amount and field WIDTH (bits), and also by a bitMASK.
 */

/* Date of FPGA bitstream build in binary coded decimal (BCD) */
#define CONFIG_SYS_FPGAREG_DATE		IOADDR(0x0D020000)
#define FPGAREG_MTH_SHIFT		24		/* BCD month 1..12 */
#define FPGAREG_MTH_WIDTH		8
#define FPGAREG_MTH_MASK		0xFF000000
#define FPGAREG_DAY_SHIFT		16		/* BCD day 1..31 */
#define FPGAREG_DAY_WIDTH		8
#define FPGAREG_DAY_MASK		0x00FF0000
#define FPGAREG_YEAR_SHIFT		0		/* BCD year 2001..9999*/
#define FPGAREG_YEAR_WIDTH		16
#define FPGAREG_YEAR_MASK		0x0000FFFF

/* FPGA core clock frequency in Hz (also input to UART) */
#define CONFIG_SYS_FPGAREG_FREQ	IOADDR(0x0D020004)	/* CPU clock frequency*/

/*
 * DIP switch (left=sw1=lsb=bit0, right=sw8=msb=bit7; off=0, on=1):
 *   Bits 0..5 set the lower 6 bits of the default ethernet MAC.
 *   Bit 6 is reserved for future use by Tensilica.
 *   Bit 7 maps the first 128KB of ROM address space at CONFIG_SYS_ROM_BASE to
 *   the base of flash * (when on/1) or to the base of RAM (when off/0).
 */
#define CONFIG_SYS_FPGAREG_DIPSW	IOADDR(0x0D02000C)
#define FPGAREG_MAC_SHIFT		0	/* Ethernet MAC bits 0..5 */
#define FPGAREG_MAC_WIDTH		6
#define FPGAREG_MAC_MASK		0x3f
#define FPGAREG_BOOT_SHIFT		7	/* Boot ROM addr mapping */
#define FPGAREG_BOOT_WIDTH		1
#define FPGAREG_BOOT_MASK		0x80
#define FPGAREG_BOOT_RAM		0
#define FPGAREG_BOOT_FLASH		(1<<FPGAREG_BOOT_SHIFT)

/* Force hard reset of board by writing a code to this register */
#define CONFIG_SYS_FPGAREG_RESET	IOADDR(0x0D020010) /* Reset board .. */
#define CONFIG_SYS_FPGAREG_RESET_CODE	0x0000DEAD   /*  by writing this code */

/*====================*/
/* Serial Driver Info */
/*====================*/

#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_COM1		IOADDR(0x0D050020) /* Base address */

/* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */
#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_CLK_FREQ
#define CONFIG_CONS_INDEX		1	/* use UART0 for console */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*======================*/
/* Ethernet Driver Info */
/*======================*/

#define CONFIG_ETHBASE			00:50:C2:13:6f:00
#define CONFIG_SYS_ETHOC_BASE		IOADDR(0x0d030000)
#define CONFIG_SYS_ETHOC_BUFFER_ADDR	IOADDR(0x0D800000)

/*=====================*/
/* Flash & Environment */
/*=====================*/

#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER			/* use generic CFI driver */
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#ifdef CONFIG_XTFPGA_LX60
# define CONFIG_SYS_FLASH_SIZE		0x0040000	/* 4MB */
# define CONFIG_SYS_FLASH_SECT_SZ	0x10000		/* block size 64KB */
# define CONFIG_SYS_FLASH_PARMSECT_SZ	0x2000		/* param size  8KB */
# define CONFIG_SYS_FLASH_BASE		IOADDR(0x08000000)
# define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#elif defined(CONFIG_XTFPGA_KC705)
# define CONFIG_SYS_FLASH_SIZE		0x8000000	/* 128MB */
# define CONFIG_SYS_FLASH_SECT_SZ	0x20000		/* block size 128KB */
# define CONFIG_SYS_FLASH_PARMSECT_SZ	0x8000		/* param size 32KB */
# define CONFIG_SYS_FLASH_BASE		IOADDR(0x00000000)
# define CONFIG_SYS_MONITOR_BASE	IOADDR(0x06000000)
#else
# define CONFIG_SYS_FLASH_SIZE		0x1000000	/* 16MB */
# define CONFIG_SYS_FLASH_SECT_SZ	0x20000		/* block size 128KB */
# define CONFIG_SYS_FLASH_PARMSECT_SZ	0x8000		/* param size 32KB */
# define CONFIG_SYS_FLASH_BASE		IOADDR(0x08000000)
# define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#endif
#define CONFIG_SYS_MAX_FLASH_SECT	\
	(CONFIG_SYS_FLASH_SECT_SZ/CONFIG_SYS_FLASH_PARMSECT_SZ + \
	 CONFIG_SYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ - 1)
#define CONFIG_SYS_FLASH_PROTECTION		/* hw flash protection */

/*
 * Put environment in top block (64kB)
 * Another option would be to put env. in 2nd param block offs 8KB, size 8KB
 */
#define CONFIG_ENV_OFFSET    (CONFIG_SYS_FLASH_SIZE - CONFIG_SYS_FLASH_SECT_SZ)
#define CONFIG_ENV_SIZE	     CONFIG_SYS_FLASH_SECT_SZ

/* print 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_EMPTY_INFO

#endif /* __CONFIG_H */
Commit	Line	Data
7e270ec3 CZ	1	/*
	2	* Copyright (C) 2007-2013 Tensilica, Inc.
	3	* Copyright (C) 2014 - 2016 Cadence Design Systems Inc.
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	#include <asm/arch/core.h>
	12	#include <asm/addrspace.h>
	13	#include <asm/config.h>
	14
	15	/*
	16	* The 'xtfpga' board describes a set of very similar boards with only minimal
	17	* differences.
	18	*/
	19
	20	/=====================/
	21	/* Board and Processor */
	22	/=====================/
	23
	24	#define CONFIG_XTFPGA
	25
	26	/* FPGA CPU freq after init */
	27	#define CONFIG_SYS_CLK_FREQ (gd->cpu_clk)
	28
	29	/===================/
	30	/* RAM Layout */
	31	/===================/
	32
	33	#if XCHAL_HAVE_PTP_MMU
	34	#define CONFIG_SYS_MEMORY_BASE \
	35	(XCHAL_VECBASE_RESET_VADDR - XCHAL_VECBASE_RESET_PADDR)
	36	#define CONFIG_SYS_IO_BASE 0xf0000000
	37	#else
	38	#define CONFIG_SYS_MEMORY_BASE 0x60000000
	39	#define CONFIG_SYS_IO_BASE 0x90000000
	40	#define CONFIG_MAX_MEM_MAPPED 0x10000000
	41	#endif
	42
	43	/* Onboard RAM sizes:
	44	*
	45	* LX60 0x04000000 64 MB
	46	* LX110 0x03000000 48 MB
	47	* LX200 0x06000000 96 MB
	48	* ML605 0x18000000 384 MB
	49	* KC705 0x38000000 896 MB
	50	*
	51	* noMMU configurations can only see first 256MB of onboard memory.
	52	*/
	53
	54	#if XCHAL_HAVE_PTP_MMU \|\| CONFIG_BOARD_SDRAM_SIZE < 0x10000000
	55	#define CONFIG_SYS_SDRAM_SIZE CONFIG_BOARD_SDRAM_SIZE
	56	#else
	57	#define CONFIG_SYS_SDRAM_SIZE 0x10000000
	58	#endif
	59
	60	#define CONFIG_SYS_SDRAM_BASE MEMADDR(0x00000000)
	61
	62	/* Lx60 can only map 128kb memory (instead of 256kb) when running under OCD */
	63	#ifdef CONFIG_XTFPGA_LX60
	64	# define CONFIG_SYS_MONITOR_LEN 0x00020000 /* 128KB */
65	#else
66	# define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */
67	#endif
68
7e270ec3 CZ	69	#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */
	70
	71	/* Linux boot param area in RAM (used only when booting linux) */
	72	#define CONFIG_SYS_BOOTPARAMS_LEN (64 << 10)
	73
	74	/* Memory test is destructive so default must not overlap vectors or U-Boot*/
	75	#define CONFIG_SYS_MEMTEST_START MEMADDR(0x01000000)
	76	#define CONFIG_SYS_MEMTEST_END MEMADDR(0x02000000)
	77
	78	/* Load address for stand-alone applications.
	79	* MEMADDR cannot be used here, because the definition needs to be
	80	* a plain number as it's used as -Ttext argument for ld in standalone
	81	* example makefile.
	82	* Handle noMMU vs MMUv2 vs MMUv3 distinction here manually.
	83	*/
	84	#if XCHAL_HAVE_PTP_MMU
	85	#if XCHAL_VECBASE_RESET_VADDR == XCHAL_VECBASE_RESET_PADDR
	86	#define CONFIG_STANDALONE_LOAD_ADDR 0x00800000
	87	#else
	88	#define CONFIG_STANDALONE_LOAD_ADDR 0xd0800000
	89	#endif
	90	#else
	91	#define CONFIG_STANDALONE_LOAD_ADDR 0x60800000
	92	#endif
	93
	94	#if defined(CONFIG_MAX_MEM_MAPPED) && \
	95	CONFIG_MAX_MEM_MAPPED < CONFIG_SYS_SDRAM_SIZE
	96	#define CONFIG_SYS_MEMORY_SIZE CONFIG_MAX_MEM_MAPPED
	97	#else
	98	#define CONFIG_SYS_MEMORY_SIZE CONFIG_SYS_SDRAM_SIZE
	99	#endif
	100
	101	#define CONFIG_SYS_MEMORY_TOP MEMADDR(CONFIG_SYS_MEMORY_SIZE)
	102	#define CONFIG_SYS_TEXT_ADDR \
	103	(CONFIG_SYS_MEMORY_TOP - CONFIG_SYS_MONITOR_LEN)
	104
	105	/* Used by tftpboot; env var 'loadaddr' */
	106	#define CONFIG_SYS_LOAD_ADDR MEMADDR(0x02000000)
	107
	108	/==============================/
	109	/* U-Boot general configuration */
	110	/==============================/
	111
7e270ec3	112	#define CONFIG_BOARD_POSTCLK_INIT
7e270ec3 CZ	113	#define CONFIG_MISC_INIT_R
	114
	115	#define CONFIG_BOOTFILE "uImage"
	116	/* Console I/O Buffer Size */
	117	#define CONFIG_SYS_CBSIZE 1024
	118	/* Prt buf */
	119	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	120	sizeof(CONFIG_SYS_PROMPT) + 16)
	121	/* max number of command args */
	122	#define CONFIG_SYS_MAXARGS 16
	123	/* Boot Argument Buffer Size */
	124	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	125
7e270ec3 CZ	126	/==============================/
	127	/* U-Boot autoboot configuration */
	128	/==============================/
	129
	130	#define CONFIG_BOOT_RETRY_TIME 60 /* retry after 60 secs */
	131
7e270ec3 CZ	132	#define CONFIG_AUTO_COMPLETE /* Support tab autocompletion */
	133	#define CONFIG_CMDLINE_EDITING
	134	#define CONFIG_SYS_LONGHELP
7e270ec3 CZ	135	#define CONFIG_MX_CYCLIC
	136	#define CONFIG_SHOW_BOOT_PROGRESS
	137
	138	#ifdef DEBUG
	139	#define CONFIG_PANIC_HANG 1 /* Require manual reboot */
	140	#endif
	141
	142
	143	/=========================================/
	144	/* FPGA Registers (board info and control) */
	145	/=========================================/
	146
	147	/*
	148	* These assume FPGA bitstreams from Tensilica release RB and up. Earlier
	149	* releases may not provide any/all of these registers or at these offsets.
	150	* Some of the FPGA registers are broken down into bitfields described by
	151	* SHIFT left amount and field WIDTH (bits), and also by a bitMASK.
	152	*/
	153
	154	/* Date of FPGA bitstream build in binary coded decimal (BCD) */
	155	#define CONFIG_SYS_FPGAREG_DATE IOADDR(0x0D020000)
	156	#define FPGAREG_MTH_SHIFT 24 /* BCD month 1..12 */
	157	#define FPGAREG_MTH_WIDTH 8
	158	#define FPGAREG_MTH_MASK 0xFF000000
	159	#define FPGAREG_DAY_SHIFT 16 /* BCD day 1..31 */
	160	#define FPGAREG_DAY_WIDTH 8
	161	#define FPGAREG_DAY_MASK 0x00FF0000
	162	#define FPGAREG_YEAR_SHIFT 0 /* BCD year 2001..9999*/
	163	#define FPGAREG_YEAR_WIDTH 16
	164	#define FPGAREG_YEAR_MASK 0x0000FFFF
	165
	166	/* FPGA core clock frequency in Hz (also input to UART) */
	167	#define CONFIG_SYS_FPGAREG_FREQ IOADDR(0x0D020004) /* CPU clock frequency*/
	168
	169	/*
	170	* DIP switch (left=sw1=lsb=bit0, right=sw8=msb=bit7; off=0, on=1):
	171	* Bits 0..5 set the lower 6 bits of the default ethernet MAC.
	172	* Bit 6 is reserved for future use by Tensilica.
	173	* Bit 7 maps the first 128KB of ROM address space at CONFIG_SYS_ROM_BASE to
	174	* the base of flash * (when on/1) or to the base of RAM (when off/0).
	175	*/
	176	#define CONFIG_SYS_FPGAREG_DIPSW IOADDR(0x0D02000C)
	177	#define FPGAREG_MAC_SHIFT 0 /* Ethernet MAC bits 0..5 */
	178	#define FPGAREG_MAC_WIDTH 6
	179	#define FPGAREG_MAC_MASK 0x3f
	180	#define FPGAREG_BOOT_SHIFT 7 /* Boot ROM addr mapping */
	181	#define FPGAREG_BOOT_WIDTH 1
	182	#define FPGAREG_BOOT_MASK 0x80
	183	#define FPGAREG_BOOT_RAM 0
	184	#define FPGAREG_BOOT_FLASH (1<<FPGAREG_BOOT_SHIFT)
	185
	186	/* Force hard reset of board by writing a code to this register */
	187	#define CONFIG_SYS_FPGAREG_RESET IOADDR(0x0D020010) /* Reset board .. */
	188	#define CONFIG_SYS_FPGAREG_RESET_CODE 0x0000DEAD /* by writing this code */
	189
	190	/====================/
	191	/* Serial Driver Info */
	192	/====================/
	193
	194	#define CONFIG_SYS_NS16550_SERIAL
	195	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	196	#define CONFIG_SYS_NS16550_COM1 IOADDR(0x0D050020) /* Base address */
	197
	198	/* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */
199	#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ
200	#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
7e270ec3 CZ	201	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	202
	203	/======================/
	204	/* Ethernet Driver Info */
	205	/======================/
	206
	207	#define CONFIG_ETHBASE 00:50:C2:13:6f:00
	208	#define CONFIG_SYS_ETHOC_BASE IOADDR(0x0d030000)
	209	#define CONFIG_SYS_ETHOC_BUFFER_ADDR IOADDR(0x0D800000)
	210
	211	/=====================/
	212	/* Flash & Environment */
	213	/=====================/
	214
	215	#define CONFIG_SYS_FLASH_CFI
	216	#define CONFIG_FLASH_CFI_DRIVER /* use generic CFI driver */
	217	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	218	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	219	#ifdef CONFIG_XTFPGA_LX60
	220	# define CONFIG_SYS_FLASH_SIZE 0x0040000 /* 4MB */
	221	# define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* block size 64KB */
	222	# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */
	223	# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000)
	224	# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	225	#elif defined(CONFIG_XTFPGA_KC705)
	226	# define CONFIG_SYS_FLASH_SIZE 0x8000000 /* 128MB */
	227	# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */
	228	# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */
	229	# define CONFIG_SYS_FLASH_BASE IOADDR(0x00000000)
	230	# define CONFIG_SYS_MONITOR_BASE IOADDR(0x06000000)
	231	#else
	232	# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* 16MB */
	233	# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */
	234	# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */
	235	# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000)
	236	# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	237	#endif
	238	#define CONFIG_SYS_MAX_FLASH_SECT \
	239	(CONFIG_SYS_FLASH_SECT_SZ/CONFIG_SYS_FLASH_PARMSECT_SZ + \
	240	CONFIG_SYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ - 1)
	241	#define CONFIG_SYS_FLASH_PROTECTION /* hw flash protection */
	242
	243	/*
	244	* Put environment in top block (64kB)
	245	* Another option would be to put env. in 2nd param block offs 8KB, size 8KB
	246	*/
7e270ec3 CZ	247	#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SIZE - CONFIG_SYS_FLASH_SECT_SZ)
	248	#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SZ
	249
	250	/* print 'E' for empty sector on flinfo */
	251	#define CONFIG_SYS_FLASH_EMPTY_INFO
	252
	253	#endif /* __CONFIG_H */